Archives: Listings

RHEOLATE® 222

RHEOLATE® 222 is a 20% solids, VOC-free polyether polyurethane associative flow modifier used in aqueous applications. Here's an overview:
General Information:
- Designed for use in emulsion paints and other waterborne systems, including inks, textile coatings, adhesives, and sealants.
- It helps maintain viscosity at high shear during product application and improves film leveling.
Chemical & Physical Properties:
- Composition: Polyether polyurethane resin solution in water
- Color/Form: Cloudy white
- Non-volatile: 19.5 - 20.5%
- Viscosity: Maximum 4000 mPa.s (Brookfield RVT#3, spindle, 20 rpm)
- Carrier Solvent: 100% water
- Density: 1.03 g/cm³
Applications:
- High-quality, low VOC latex paints
- High-gloss interior and exterior latex paints
- Semi-gloss interior and exterior latex paints
- Flat interior and exterior latex paint
- Inks
- Adhesives
- Textile coatings
Key Properties:
- Highly efficient high-shear rate viscosity build
- Excellent leveling
- Enhances film build and brush drag
- VOC-free
- Superior spatter resistance
- Good color acceptance
- Bio-stable
- pH independent
- Pourable liquid for easy addition
- Compatible with other thickeners
- Does not detract from gloss or wet adhesion
Incorporation:
- Can be used as supplied or further diluted with water if necessary.
- Addition can take place at any time during the formulation manufacturing process, but incorporation into the millbase before letdown is recommended.
- Can be combined with other associative rheological additives, clay-based thickeners, or cellulosic thickeners for higher package viscosity and improved sag control.

BENTONE® HC

BENTONE® HC is a refined hectorite clay specifically designed for the thickening and flow control of aqueous systems. Here's an overview of its properties and applications:
General Information:
- BENTONE® HC is suitable for use in various filled aqueous systems.
- It can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system.
Physical Properties:
- Composition: Refined hectorite clay
- Color/Form: Cream free-flowing powder
- Density: 2.6 g/cm3
- Particle Size: 95% < 75 micron
Applications:
- Building materials such as mortar cement and gypsum
- Ready-mixed plasters
- Water-borne adhesives
- High PVC coatings
- Household cleaners and polishes
- Crop protection agents
- Ceramic compounds and glazes
- Paint detackification systems
Key Properties:
- Cost-effective thixotropic additive for filled aqueous systems
- Provides shear-thinning viscosity and stable package rheology over a wide temperature range
- Improves slump or sag resistance
- Does not retard drying; has fast water release
- Acts as suspending agent, preventing hard settlement
- Bacteria- and enzyme-resistant
- Can be used to make concentrated pre-gels of refined hectorite
Incorporation:
- Can be added dry to the formulation along with other mineral components and will develop its gelling ability under high-shear dispersion conditions.
- Stable within the pH range of 6–11.
- For improved performance and easier incorporation, it is better to prepare a pre-gel at around 10% solids, preferably in warm water.
Levels of Use:
- Typical levels range from 0.3–2.0% BENTONE® HC additive, based on the total formulation.
Health and Safety:
- Detailed handling and safety information is provided in the Material Safety Data Sheet (MSDS).
Storage Recommendations:
- Store in a dry place. BENTONE® HC will absorb moisture if stored under high humidity conditions, but this will not affect its overall performance.

RHEOLATE® 678

RHEOLATE® 678 is an associative rheological additive specifically designed for low VOC formulations, particularly for waterborne coatings such as latex paints. Here's a breakdown of its key features and properties:
General Information:
- RHEOLATE® 678 is suitable for use in waterborne paints based on various latex systems.
- It offers superior thickening efficiency in both mid- and high-shear rate ranges.
- Provides in-can viscosity and improves brush-drag in paint formulations.
Physical Properties:
- Appearance: Translucent Off-White to White Liquid
- Active Solids: 25%
- Total Solids: 32.5%
- Brookfield Viscosity: < 10,000 cps (Brookfield RVT spindle 4, 20 rpm, 25°C)
- Specific Gravity: 1.06
- Solvent: Water
Applications:
- Gloss and satin-gloss latex paints
- Interior and exterior latex paints
- Water-reducible paints
- Adhesives
- Inks
Key Properties:
- Low odor
- Balanced mid- and high-shear flow
- Enhances film build
- Provides excellent brush drag
- Imparts superior flow and leveling
- Reduces spattering during roller application
- Good color acceptance and stability
- Easily incorporated into formulations
- Compatible with other rheological additives
Incorporation:
- Typically added just after latex addition in the let-down process.
- Low-shear thickener should be added after RHEOLATE® 678.
- Care should be taken in sensitive formulations to avoid destabilization.
- In some cases, dilution with water may be advisable before incorporation.
- Can be combined with other rheological additives to achieve desired flow properties.
Levels of Use:
- Typical use levels range from 0.4% to 2.0% by weight of the paint.
- A ladder test may be conducted to determine the optimal dosage.
Health and Safety:
- Detailed handling and safety information is provided in the material safety data sheet (MSDS).
Storage Recommendations:
- Store in a cool, dry location above 4°C (40°F).
- Avoid freezing, and if accidental freezing occurs, examine for granules before use.

THIXATROL® AS 8053

THIXATROL® AS 8053 is an organic rheological additive designed to enhance the performance of solvent-borne and high solids systems, particularly in applications such as hybrid sealants, industrial coatings, corrosion protective epoxy primers, and polyurethane topcoat systems. Here are some key details about THIXATROL AS 8053:
General Information:
- THIXATROL AS 8053 is a 100% active, seed-resistant organic rheological additive.
- It provides high viscosity, thixotropy, and thick layer sag control in systems with little solvent or are solvent-free.
Chemical & Physical Properties:
- Composition: Proprietary organic
- Color/Form: Fine off-white powder
- Bulk Density: 0.25 g/cm3 (2.08 lb/gal)
- Density: 1.02 g/cm3
- Melting Point: 120 - 130 °C
- Mean Particle Size: Maximum 5 microns
Applications:
- Hybrid sealants (MSP and SPUR)
- Industrial coatings
- Corrosion protective high solids epoxy primers
- Two-component high solids polyurethane topcoat systems
Key Properties:
- Provides viscosity control, thixotropy, and excellent very thick layer sag resistance.
- Seed-resistant and allows low temperature activation, processing, and packaging.
- Cost-effective 100% active powder that is highly active at low loading levels.
- Broad compatibility with various solvents.
- Shows no intercoat adhesion problems when overcoated with a topcoat.
Incorporation:
- Requires specific processing temperature and dwell time for optimum properties.
- Should be introduced at the beginning of the manufacturing process for complete activation.
- Recommended activation temperatures for various applications are provided.
Levels of Use:
- Typical levels range from 0.5% to 3.5% of the total system weight.
- Optimum use level may vary depending on the system chemistry.
Storage Recommendations:
- Should be kept in a cool, dry location, avoiding stacking pallets in hot climates.
- Shelf life of 4 years from the date of manufacture.
Overall, THIXATROL AS 8053 is a versatile additive that offers improved rheological properties and performance enhancements for various coating and sealant applications.

Harcryl® 1228 M UV

Harcryl® 1228 M UV is a specialized acrylic monomer designed for UV curable coatings. Here's a summary of its features and properties:
Composition: It is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate), predominantly composed of the mono-alkyl phosphate ester. This composition allows for easy incorporation into various polymer systems, with a higher hydrophilicity compared to Harcryl® 1228.
Inhibition: Inhibited with 100ppm of added MeHQ.
Functionality: The phosphate functional group promotes adhesion to surfaces, reducing the need for pretreatments. This enhances adhesion, saves time, and reduces coating layers. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems, including UV and radiation curable coatings.
Benefits:
- Adhesion Promotion: Reduces the need for pretreatments, saving time and reducing coating layers.
- Corrosion Resistance: Enhances corrosion resistance, reducing the need for additional inhibitors.
- UV Curable: Designed specifically for UV curable coatings.
Usage: Should not be used as a straight additive. As a monomer, it should be fed separately or in the monomer pre-mix. It has a shelf life of 1 year from the manufacturing date.
Handling & Storage: Should be stored in stainless steel, lined, or plastic vessels. Listed as a DOT corrosive.
Features:
- Suitable for concrete, metals (aluminum, galvanized steel, iron-phosphated steel, zinc-phosphated steel, rolled steel, and stainless steel), and polymers (acrylic, styrene/acrylic, VEOVA/acrylic, and polyurethanes).
- Contains a reactive methacrylic group and a phosphate active group.
- Promotes adhesion and provides corrosion resistance.
Typical Properties:
- Appearance: Yellow Viscous Liquid
- Activity: 99% min
- Moisture: 1% Max
- Acid #1 (mgKOH/gm): 5.5 pH 312
- Acid #2 (mgKOH/gm): 9.5 pH 580-590
- pH (1% aqueous): 1.5-2.5
- Flash Point: >93°C
- Specific Gravity @ 25°C: 1.250-1.350

Harcryl® 1228 UV

Harcryl® 1228 UV is a specialized acrylic monomer designed for UV curable coatings. Here's a breakdown of its features and properties:
Composition: It consists of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows for easy incorporation into various polymer systems. Its polarity enables application in hydrophilic formulations.
Inhibition: Inhibited with 100ppm of added MeHQ.
Functionality: The phosphate functional group promotes adhesion to surfaces, reducing the need for pretreatments. This enhances adhesion, saves time, and reduces coating layers. It also improves corrosion resistance, reducing the need for additional inhibitors. The acrylic backbone facilitates easy incorporation into UV and radiation curable coatings.
Benefits:
- Adhesion Promotion: Reduces the need for pretreatments, saving time and reducing coating layers.
- Corrosion Resistance: Enhances corrosion resistance, reducing the need for additional inhibitors.
- UV Curable: Designed specifically for UV curable coatings.
Usage: Should not be used as a straight additive. As a monomer, it should be fed separately or in the monomer pre-mix. It has a shelf life of 1 year from the manufacturing date.
Handling & Storage: Should be stored out of sunlight in stainless steel, lined, or plastic vessels. Listed as a DOT corrosive.
Features:
- Suitable for concrete, metals (aluminum, galvanized steel, iron-phosphated steel, zinc-phosphated steel, rolled steel, and stainless steel), and polymers (acrylic, styrene/acrylic, VEOVA/acrylic, and polyurethanes).
- Contains a reactive methacrylic group and a phosphate active group.
- Promotes adhesion and provides corrosion resistance.
Typical Properties:
- Appearance: Yellow Liquid
- Activity: 99% min
- Moisture: 1% Max
- Acid #1 (mgKOH/gm): 5.5 pH 196-206
- Acid #2 (mgKOH/gm): 9.5 pH 275-290
- pH (1% aqueous): 1.5-2.5

Harcryl® 1228

Harcryl® 1228 is a unique, functional acrylic monomer composed of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. Here's an overview:
Composition: It consists of both mono and di-phosphate esters, allowing easy incorporation into various polymer systems. The polarity of Harcryl® 1228 enables its application in hydrophilic formulations as well.
Inhibition: Inhibited with 400ppm of added hydroquinone.
Functionality: The phosphate functional group promotes adhesion to various surfaces, reducing the need for pretreatments. It improves corrosion resistance, thus reducing the necessity for additional inhibitors. The acrylic backbone facilitates easy incorporation into many coating systems.
Benefits:
- Adhesion Promotion: Reduces the need for pretreatments, saving time and reducing coating layers.
- Corrosion Resistance: Enhances corrosion resistance, reducing the need for additional inhibitors.
- Versatile Incorporation: Easily integrates into various coating systems.
Usage: Harcryl® 1228 should not be used as a straight additive. As a monomer, it should be fed separately or in the monomer pre-mix. It has a shelf life of 1 year from the manufacturing date.
Handling & Storage: Should be stored out of sunlight in stainless steel, lined, or plastic vessels. Listed as a DOT corrosive.
Features:
- Suitable for concrete, metals (aluminum, galvanized steel, iron-phosphated steel, zinc-phosphated steel, rolled steel, and stainless steel), and polymers (acrylic, styrene/acrylic, VEOVA/acrylic, and polyurethanes).
- Contains a reactive methacrylic group and a phosphate active group.
- Promotes adhesion and provides corrosion resistance.
Typical Properties:
- Appearance: Yellow Liquid
- Activity: 99% min
- Moisture: 1% Max
- Acid #1 (mgKOH/gm): 5.5 pH 196-206
- Acid #2 (mgKOH/gm): 9.5 pH 275-290
- pH (1% aqueous): 1.5-2.5

Harcryl® 1228 M

Harcryl® 1228 M is a chemical product manufactured by Harcros Chemicals Inc. It's a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate). Here's an overview:
Composition: Harcryl® 1228 M mainly consists of the monoalkyl phosphate ester, making it easily incorporated into various polymer systems. Its hydrophilic nature is due to the ratio of mono-alkyl to dialkyl phosphate.
Inhibition: Inhibited with 400ppm of added hydroquinone.
Functionality: The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. It enhances corrosion resistance and reduces the need for additional inhibitors. The acrylic backbone allows easy incorporation into many coating systems.
Benefits:
- Adhesion Promotion: Reduces the need for pretreatments, saving time and reducing coating layers.
- Corrosion Resistance: Enhances corrosion resistance, reducing the need for additional inhibitors.
- Versatile Incorporation: Easily integrates into various coating systems.
Usage: Harcryl® 1228 M should not be used as a straight additive. As a monomer, it should be fed separately or in the monomer pre-mix. It has a shelf life of 1 year from the manufacturing date.
Handling & Storage: Should be stored out of sunlight in stainless steel, lined, or plastic vessels. Listed as a DOT corrosive.
Features:
- Suitable for concrete, metals (aluminum, galvanized steel, iron-phosphated steel, zinc-phosphated steel, rolled steel, and stainless steel), and polymers (acrylic, styrene/acrylic, VEOVA/acrylic, and polyurethanes).
- Contains a reactive methacrylic group and a phosphate active group.
- Promotes adhesion and provides corrosion resistance.
Typical Properties:
- Appearance: Yellow viscous liquid
- Activity: 99% min
- Moisture: 1% Max
- Acid #1 (mgKOH/gm): 5.5 pH 312
- Acid #2 (mgKOH/gm): 9.5 pH 580-590
- pH (1% aqueous): 1.5-2.5
- Flash Point: >93°C
- Specific Gravity @ 25°C: 1.250-1.350

H-Sperse® 5500N

H-Sperse® 5500N is a non-ionic polymeric dispersant manufactured by Harcros Chemicals Inc. It is specifically designed for dispersing organic pigments and particles in aqueous applications. Here's an overview of its key characteristics:
Benefits:
- Dispersions made using H-Sperse® 5500N demonstrate long-term viscosity stability.
- As a non-ionic dispersant, it ensures stability under a wide range of pH conditions, both acidic and basic.
- Suitable for making dispersions of carbon black.
Features:
- Non-Ionic: Dispersion stability is maintained under both acidic and basic conditions.
- Permits very high solids loading.
- General-purpose hydrophobe works with a wide variety of particulate materials.
Applications:
- Useful for dispersing many organic particles and pigments in aqueous applications.
- Especially beneficial for dispersing carbon black in inks and paints.
Handling & Toxicity:
- Should be stored in stainless steel, lined, or plastic vessels.
- For specific handling information, refer to the Safety Data Sheet (SDS).
Regulatory Clearances:
- This product is contained in the Toxic Substances Control Act (TSCA) inventory.
- Contact the manufacturer for specific regulatory information.
Typical Properties:
- Appearance: Clear to hazy liquid
- Activity: 70% min
- Water Dispersibility: 100%
- Pour/Freeze Point: 7.2°C (<45°F)
- Flash Point: 148°C (>300°F)

H-Sperse® 4000N

H-Sperse® 4000N is a polymeric dispersant manufactured by Harcros Chemicals Inc., specifically designed for dispersing organic pigments and particles in aqueous applications. Here's an overview of its key characteristics:
Benefits:
- Dispersions made using this material demonstrate long-term viscosity stability.
- Especially suitable for making carbon black dispersions for higher-end ink and coatings applications.
- Excellent color strength may be achieved with H-Sperse® 4000N.
Features:
- APE (Alkylphenol Ethoxylates) and NPE (Nonylphenol Ethoxylates) free.
- Non-ionic: Dispersion stability is maintained under both acidic and basic conditions.
- Inhibits viscosity creep.
Applications:
- Useful for dispersing many organic particulates and pigments in aqueous applications.
- Particularly beneficial for dispersing carbon black in inks and paints.
Handling & Toxicity:
- Should be stored in stainless steel, lined, or plastic vessels.
- For specific handling information, refer to the Material Safety Data Sheet (MSDS).
Regulatory Clearances:
- This product is contained in the Toxic Substances Control Act (TSCA) inventory.
- Contact the manufacturer for specific regulatory information.
Typical Properties:
- Appearance: White, waxy solid
- Activity: 99.5% min
- Water Dispersibility: 100%
- Pour/Freeze Point: 47.7°C (118°F)
- Flash Point: 148°C (>300°F)