Archives: Listings

Here is the formulation and technical data sheet for the protective rust-converting clear-coating "WBACRY700RF1" without the percentages:

Formulation

Product Name:

• WBACRY700RF1

Type:

• Protective Rust Converting Clear-Coating

Manufacturing Instructions

STEP 1:

• Mix the following separately while stirring, and set aside:
  1. AMP90 - Neutralizer (Supplier: ANGUS)
  2. ASCONIUM-114 - Anticorrosion Additive (Supplier: ASCOTEC)

STEP 2:

• Into the let-down tank, add the following in order, progressively, with continuous stirring: 3. AC2403 - Binder (Supplier: ALBERDINGK BOLEY)
  4. BYK024 - Defoamer (Supplier: BYK)
  5. STEP-1 Premix
  6. Water
  7. ENHANCER 300 - Co-solvent (Supplier: EASTMAN)
  8. ACRYSOL RM5000 - Thickener (Supplier: DOW)
  9. TEGOWET KL 245 - Wetting Agent (Supplier: EVONIK)
  10. ASCOTRAN-H10 - Flash-rust Inhibitor (Supplier: ASCOTEC)
  11. ASCOTRUST X1 - Rust Converter (Supplier: ASCOTEC)

Dry Film Thickness (DFT) Variations

• DFT 20µm
• DFT 25µm
• DFT 30µm
• DFT 50µm

Salt-Spray Performances – 250H

Testing Results:

• Protective Rust Converting Clear-Coating

Coating Types:

• Clear-Coating WB Coating
• WB Metal Coating

Various Pre-treatments:

• WBACRY700RF1 with Tannic Acid Based Pretreatment
• WBACRY700RF1 with ASCOTRUST Based Pretreatment

This formulation and data sheet provide comprehensive details for manufacturers and users to evaluate the clear-coating's performance and suitability for various applications, emphasizing the need for full-scale testing in real-world conditions.

Here is the formulation and technical data sheet for the water-based white glossy coating "Industrial Coating M-60-117XK" without the percentages:

Formulation

Product Name:

• Industrial Coating M-60-117XK

Base Material:

• Neocryl XK-117®

Manufacturing Instructions

Formulation:

1. Neocryl® XK-117 - Binder (Supplier: Covestro Coating Resins)
2. Byk 024 - Defoamer (Supplier: BYK Chemie)

Premix:

• Premix the following and add to 1-2 while stirring: 3. Asconium-142-DA - Anticorrosive additive (Supplier: Ascotec)
  4. AMP-90 - Multifunctional (Supplier: Angus)
  5. Demi water
  6. Dowanol DPnB - Co-solvent (Supplier: Dow Chemicals)
  7. Ascotran-H10 - Flash-rust inhibitor (Supplier: Ascotec)

Mill Base:

• Add the following in the listed order to 1-4 while stirring: 8. Demi water
  9. Tegodisperse 750W - Dispersing agent (Supplier: Evonik)
  10. Byk 024 - Defoamer (Supplier: BYK Chemie)
  11. Tafigel PUR 85 - Rheology additive (Supplier: Münzing Chemie)
  12. Kronos 2190 - Pigment (Supplier: Kronos)
• Mix 8-12 in the listed order and disperse until fineness is less than 10 µm.
• Add the mill base to the formulation (1-7).

Let Down:

• Add the following while mixing well: 13. Tafigel PUR 64 - Rheology additive (Supplier: Münzing Chemie)
• Disperse for 10 minutes at 2000 rpm.
• Check film appearance by making a drawdown on glass with a 100 µm applicator.

Typical Values

Tests:

• Dry solids by weight: 42%
• pH: 8.4
• Viscosity Brookfield 60 rpm @ 25°C: 500 mPa.s
• PVC: 15.5%

Spraying Conditions

Air Spray:

• Nozzle: 2.0 mm
• Pressure: 3.5 bar

Drying Conditions

Step 1:

• Temperature: 22°C
• Relative Humidity: 50%
• Drying Time: 24 hours

Step 2:

• Temperature: 50°C
• Drying Time: 16 hours
• Airspeed: 1.2 m/s

Application Properties

Tests:

• Gloss (20° / 60°): 66 / 88 GU
• Konig Hardness after 1 day at RT: 23 sec
• Konig Hardness after 1 day at 50°C ageing: 96 sec
• Adhesion to CRS type Q-panel R-46: Gt

Performance Level

Salt Spray Resistance (ASTM B117):

• Scribe Corrosion after 500 hours exposure: None
• Field Corrosion after 500 hours exposure: None

This formulation and data sheet provide comprehensive details for manufacturers and users to evaluate the white glossy DTM coating's performance and suitability for various applications, emphasizing the need for full-scale testing in real-world conditions.

Here is the formulation and technical data sheet for the high-gloss water-based white direct-to-metal (DTM) coating "LONG-TERM PROTECTION REFERENCE: SPFWBACRY7625" without the percentages:

Formulation

Product Name:

• HIGH-GLOSS WB WHITE DTM

Base Material:

• NEOCRYL XK85 WITH ASCONIUM-143

Manufacturing Instructions

STEP 1:

• Add the following in order with good agitation in the mill-base tank:
  1. DEIONIZED WATER
  2. TEGODISPERSE 750W - Dispersing Agent (Supplier: EVONIK)
  3. BYK 024 - Defoamer (Supplier: BYK)
  4. AMP90 - Neutralizer (Supplier: ANGUS)
  5. KRONOS 2190 - TiO2 (Supplier: KRONOS)
• Disperse with high shear rate for 10-15 minutes, then set aside.
• Add ASCONIUM-143 - Anticorrosion Additive (Supplier: ASCOTEC)

STEP 2:

• Into the let-down tank, add the following in order, progressively, with continuous stirring:
  1. NEOCRYL XK85 - Binder (Supplier: DSM)
  2. DEIONIZED WATER
  3. BYK 024 - Defoamer (Supplier: BYK)
  4. DPnB - Co-solvent (Supplier: Dow Chemicals)
  5. ASCOTRAN-H10 - Flash-rust inhibitor (Supplier: ASCOTEC)
  6. STEP-1 Mill-base
  7. TAFIGEL PUR64 - Thickener (Supplier: MÜNZING)

Paint Data

• PVC: 15.6%
• PVC/CPVC Ratio: 0.28
• Gloss Level (60°): 90

Salt-Spray Performances

• Substrate: Cold-rolled steel
• Duration: 720 hours
• Coating Thickness: 1 layer, 70-75 µm dry

This formulation and data sheet provide comprehensive details for manufacturers and users to evaluate the high-gloss white DTM coating's performance and suitability for various applications, emphasizing the need for full-scale testing in real-world conditions.

Here is the formulation and technical data sheet for the high-gloss water-based white direct-to-metal (DTM) coating "LONG-TERM PROTECTION REFERENCE: SPFWBACRY7358" with the raw materials and steps without the percentages:

Formulation

Product Name:

• HIGH-GLOSS WB WHITE DTM

Base Material:

• PLIOTEC HDT16 WITH ASCONIUM-142DA

Manufacturing Instructions

STEP 1:

• Add the following in order with good agitation in the mill-base tank:
  1. DEIONIZED WATER
  2. TEGODISPERSE 750W - Dispersing Agent (Supplier: EVONIK)
  3. DPnB - Co-solvent (Supplier: Dow Chemicals)
  4. BYK 024 - Defoamer (Supplier: BYK)
  5. TAFIGEL PUR 85 - Thickener (Supplier: MÜNZIG)
  6. KRONOS 2190 - TiO2 (Supplier: KRONOS)
• Disperse with high shear rate for 10-15 minutes, then set aside.

STEP 2:

• Mix the following separately while stirring, then set aside:
  1. ASCONIUM-142DA - Anticorrosion Additive (Supplier: ASCOTEC)
  2. DMEA - Neutralizer (Supplier: ANGUS)

STEP 3:

• Into the let-down tank, add the following in order, progressively, with continuous stirring:
  1. PLIOTEC HDT16 - Binder (Supplier: OMNOVA)
  2. BYK 024 - Defoamer (Supplier: BYK)
  3. STEP-2 Premix
  4. DEIONIZED WATER
  5. DPnB - Co-solvent (Supplier: Dow Chemicals)
  6. ASCOTRAN-H10 - Flash-rust inhibitor (Supplier: ASCOTEC)
  7. STEP-1 Mill-base
  8. ACRYSOL RM8W - Thickener (Supplier: DOW)

Paint Data

• PVC: 12.8%
• PVC/CPVC Ratio: 0.56
• Gloss Level (60°): 90

Condensation Test (ISO 6270)

• Substrate: Cold-rolled steel
• Duration: 480 hours
• Coating Thickness: 1 layer, 100 µm dry
• Adhesion Test (ISO 2409): 24 hours after testing

Salt-Spray Test (ISO 9227)

• Substrate: Cold-rolled steel
• Duration: 480 hours
• Coating Thickness: 1 layer, 100 µm dry
• Adhesion Test (ISO 2409): 24 hours after testing

SPF 7358:

• 2.5% Component A (liquid form)
• 2.5% Component B (liquid form)

This formulation and data sheet provide comprehensive details for manufacturers and users to evaluate the high-gloss white DTM coating's performance and suitability for various applications, emphasizing the need for full-scale testing in real-world conditions.