Archives: Listings

SYNTHALAT-A 156 HS is a high-solid acrylic resin designed for use in two-pack coatings in combination with polyisocyanates. Here's a breakdown of its characteristics, properties, and applications:

Characteristics:

• Type: Polyisocyanate-curing high-solid acrylic resin
• Supplied as: 70% solution in shellsol A/ethoxypropyl acetate/butyl acetate/butyl glycol acetate (2:2:3.5:1)

Use:

• Intended for high-solid two-pack coatings that air and oven-dry in combination with polyisocyanates
• Provides high strength and resistance to chemical attack and weathering
• Particularly suitable for large-capacity vehicles, cars, and industrial coatings

Properties:

• Hydroxyl value: 135-150
• Hydroxyl content: Approximately 4.5% (relative to solid resin)
• Flow time: 60-80 sec (60% in butyl acetate)
• Gardner color value: Maximum 2 (60% in butyl acetate)
• Non-volatile content: 70 +/- 1%
• Flash point: 48°C
• Density: 1.034 g/ml

Mixing Ratio with Polyisocyanate:

• Recommended mixing ratio relative to 100 parts by weight of SYNTHALAT-A 156 HS (solid) is calculated based on the hydroxyl content of SYNTHALAT-A 156 HS relative to solid resin

Solubility/Dilutability:

• Compatible with various solvents including ethyl acetate, butyl acetate, butoxyl, ethoxypropyl acetate, MEK, MIBK, shellsol A, solvesso 150, toluene, and xylene
• Important to use only hydroxylgroup-free solvents for dilution

SYNTHALAT-A 150 S is an acrylic resin designed for use in combination with polyisocyanates for air and stove-drying two-component coatings. Here's a breakdown of its characteristics, properties, and applications:

Characteristics:

• Type: Acrylic resin cross-linking with polyisocyanate
• Supplied as: 60% solution in xylene/shellsol A/butyl acetate (2:1:1)

Use:

• Intended for use in combination with aliphatic polyisocyanates for coatings requiring high mechanical resistance and resistance to chemicals and weathering
• Suitable for air and stove-drying two-component coatings for metals and plastics

Properties:

• Hydroxyl value: 130-150
• Hydroxyl content: Approximately 4.5% (relative to non-volatile components)
• Flow time: 160-220 sec (50% in xylene)
• Gardner color value: < 2 (50% in xylene)
• Non-volatile content: 60 +/- 1%
• Flash point: Approximately 30°C
• Density: 1.017 g/ml

Applications:

• Used in coatings for metals and plastics where high coating qualities are required but stoving is not feasible due to size or heat-sensitivity of the object
• Examples include automotive refinishes, prime coatings for buses and streetcars, and plastic objects

Film Properties:

• Forms non-yellowing films with excellent weathering resistance and gloss retention
• Exhibits high scratch and abrasion resistance, good solvent resistance, and resistance to water and corrosive chemicals
• Offers significantly higher resistance to abrasion and solvents compared to certain other products in the same range

Pigmentation:

• Has high pigment loading and excellent pigment wetting properties
• Suitable for pigmentation with neutral pigments and fillers
• Certain pigments containing soluble metallic compounds may affect curing and shorten the pot life of mixed batches

Catalysis:

• Organometallic compounds such as dibutyltin dilaurate can be added to accelerate drying

Mixing Ratio with Polyisocyanate:

• Recommended mixing ratio relative to 100 parts by weight of SYNTHALAT-A 150 S (solid) is calculated based on the hydroxyl content of SYNTHALAT-A 150 S relative to non-volatile components

Solubility/Dilutability:

• Compatible with various solvents including ethyl acetate, MEK, butyl acetate, MIBK, MGA, toluene, and xylene
• Limited dilutability with solvesso 100 and solvesso 150.

SYNTHALAT-A 150 is a polyisocyanate-curing acrylic resin supplied in two forms: A and B. Form A is a 60% solution in xylene, shellsol A, and butyl acetate (in a ratio of 2:1:1), while form B is a 60% solution in butyl acetate. It is primarily used in two-pack coatings that are air- and oven-drying in combination with aliphatic polyisocyanates for industrial coatings, providing high mechanical strength, good adhesion, and resistance to weathering.

Here are the key characteristics, properties, and applications of SYNTHALAT-A 150:

Characteristics:

• Supplied as: A = 60% in xylene/shellsol A/butyl acetate (2:1:1), B = 60% in butyl acetate
• Application: Two-pack coatings for industrial use with high mechanical strength, good adhesion, and weather resistance
• Suitable for coatings on metals and plastics
• Provides non-yellowing finishes with excellent weather resistance and gloss retention

Properties:

• Hydroxyl value: 130-150
• Hydroxyl content: Approximately 4.5% (relative to non-volatile components)
• Flow time: A: 140-180 sec, B: 150-180 sec
• Gardner color value: < 2 for both forms
• Non-volatile content: 60 +/- 1%
• Flash point: A: Approximately 30°C, B: Approximately 25°C
• Density: A: 0.99 g/ml, B: 1.01 g/ml

Applications:

• Used in coatings for metals and plastics requiring air- and oven-drying
• Suitable for car refinishing, original finishing of buses and trams, plastic items, etc.

Film Properties:

• Affords films with excellent weather resistance, gloss retention, scratch and abrasion resistance, solvent resistance, and good resistance to water and aggressive chemicals
• Higher cross-linking density compared to some other products in the same range, resulting in greater abrasion and solvent resistance

Mixing Ratio with Polyisocyanate:

• Recommended mixing ratio relative to 100 parts by weight of SYNTHALAT-A 150 (solid) is calculated based on the hydroxyl content of SYNTHALAT-A 150 relative to non-volatile content

Solubility/Dilutability:

• Compatible with various solvents including ethyl acetate, MEK, butyl acetate, MIBK, MGA, toluene, xylene, butoxyl, and solvesso 100
• Limited thinnability with solvesso 150
• Only non-aqueous solvents and those containing no hydroxyl groups may be used

Compatibility:

• Compatible with various compounds including Synthalat A-055, A-075, A-141 HS, A-151, A-190, Synthoester 1018, 1130, 170 HS, NC chips and wool E 510, Vinylite VAGH, VROH, and others
• Compatibility with Desmodur N and Desmodur L based on an equivalent reaction of the reactive groups (NCO:OH = 1:1)

Storage:

• Can be stored under appropriate conditions for at least one year.

SYNTHALAT-A 147 HS is a hydroxyl group-containing polyester/acrylic-resin supplied as a 70% solution in butyl acetate/butyl glycol acetate (25:5). It is primarily used in combination with polyisocyanates for air- and oven-drying two-pack high-solid clear- and pigmented topcoats for metals and plastics. Here are its key characteristics, properties, and applications:

Characteristics:

• Supplied as: 70% in butyl acetate/butyl glycol acetate (25:5)
• Application: Two-pack high-solid clear- and pigmented topcoats for metals and plastics
• Provides coatings with high mechanical properties, high gloss and body, and good weather and chemical resistance

Properties:

• Hydroxyl value: 140-160
• Hydroxyl content: Approximately 4.5% (relative to non-volatile components)
• Viscosity: 1,500-2,500 mPas (as supplied)
• Gardner colour value: < 2 (as supplied)
• Non-volatile content: 70 +/- 1%
• Flash point: Approximately 28°C
• Density: Approximately 1.04 g/ml
• Acid value: 20-30 (relative to non-volatile components)

Mixing Ratio with Polyisocyanate:

• Assuming equivalent reaction of the reactive groups (NCO:OH = 1:1), the recommended mixing ratio is calculated based on the hydroxyl content of SYNTHALAT-A 147 HS relative to solid resin

Solubility/Dilutability:

• Dilutable with various solvents including ethyl acetate, butyl acetate, butoxyl, ethoxy propyl acetate, MEK, MIBK, shellsol A, solvesso 150, toluene, and xylene
• Ensure the use of hydroxyl group-free solvents for dilution

Compatibility:

• Compatible with various compounds including Synthalat A-045, A-055, A-060, A-065, A-075, A-077, A-084, A-085, A-088 MS, A-120, A-125 HS, A-135, A-135 N, A-141 HS, A-150, A-150 S, A-151, A-156 HS, A-190, A-191, A-192, A-200, A-1613, A-1615, A-1633, A-1653, Synthoester-HD 080, HD 165, HD 170 HS, TS 8013, TS 186 HS, Synthalan-LS 768, HS 86 B, Cellulose acetobutyrat, and others
• Compatibility with various polyisocyanates including Desmodur N 75, IL, N 3390, HL, L 75, L 67, Vestanat T 1890 L, Tolonate HDT-LV

These properties make SYNTHALAT-A 147 HS suitable for a wide range of coating applications requiring durability and high performance.

SYNTHALAT-A 141 HS is an acrylic resin with high solids content, primarily used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings. Here's an overview of its characteristics, properties, and applications:

Characteristics:

• Supplied as: 70% in shellsol A/butyl acetate (2:1)
• Application: Used for industrial coatings requiring high flexibility, adhesion, and weathering resistance
• Suitable for coatings on metals and plastics
• Environmentally safer system compared to other options

Properties:

• Hydroxyl value: 130-140
• Hydroxyl content: Approximately 4.2% (relative to non-volatile components)
• Viscosity: 800-1,400 mPas (60% in Buac)
• Gardner colour value: < 2
• Non-volatile content: 70 +/- 1%
• Flash point: Approximately 39°C
• Density: 1.04 g/ml

Film Properties:

• When combined with aliphatic polyisocyanates like "Desmodur N," it produces non-yellowing coatings with excellent weathering resistance, gloss retention, scratch and abrasion resistance, solvent resistance, and resistance to water and corrosive chemicals.

Pigmentation:

• Exhibits high pigment binding and good pigment wetting
• Compatible with all neutral pigments and fillers, but basic pigments and those containing soluble metallic compounds may affect curing and shorten pot life

Catalysis:

• Organometallic compounds or tertiary amines can be added to accelerate drying; typically, approximately 0.3% diethanolamine (solid) is adequate

Mixing Ratio with Polyisocyanate:

• Assuming an equivalent reaction of the reactive groups (NCO:OH = 1:1), the recommended mixing ratio is 100 parts by weight of SYNTHALAT-A 141 HS with 44 parts by weight of "Desmodur N 75%"

Solubility/Dilutability:

• Dilutable with various solvents including ethyl acetate, MEK, butyl acetate, MIBK, and others
• Limited dilutability with xylene and largely dilutable with some other solvents
• Ensure anhydrous solvents and those without hydroxyl groups are used

Compatibility:

• Compatible with various compounds including Synthalat A 055, A 065, A 075, A 085, A 135, A 150, A 151, A 190, Synthoester HD 170 HS, 1018, 1130, NC-Chips E 510, Vinylite VAGH, and others
• Compatible with Desmodur N

Shelf-life:

• If properly stored, it has a shelf-life of at least one year.

SYNTHALAT-A 090 is a polyisocyanate-curing acrylic resin primarily used in combination with cycloaliphatic polyisocyanate adducts for air- and oven-drying two-pack coatings. Here's a breakdown of its characteristics and properties:

Characteristics:

• Supplied as: 60% in xylene/butyl acetate (1:1)
• Application: Used for coatings on plastics, particularly ABS copolymers
• Thinnable with white spirit at ratios of up to 1 : 0.7 without causing swelling
• Film properties: Provides finishes with good adhesion, flexibility, and weather resistance when combined with cycloaliphatic polyisocyanate adducts

Properties:

• Hydroxyl value: 80 - 100
• Hydroxyl content: Approximately 2.7% (relative to non-volatile content)
• Viscosity (as supplied): 1,000 – 1,600 mPas
• Gardner colour value: < 2
• Non-volatile content: 60 +/- 1%
• Flash point: Approximately 25°C
• Density: 0.99 g/ml

Pigmentation:

• High pigment absorption and excellent pigment wetting properties
• Suitable for use with neutral pigments and fillers; however, basic pigments and pigments containing soluble metal compounds may affect curing and shorten pot life

Mixing ratio with polyisocyanate:

• Based on an equivalent reaction of the reactive groups (NCO : OH = 1 : 1)

Solubility/Dilutability:

• Thinnable with various solvents including ethyl acetate, MEK, butyl acetate, xylene, toluene, and others
• White spirit can be used for thinning, with limited thinnability

Compatibility:

• Compatible with various compounds including Synthalat A 045, A 055, A 085, NC chips E 510, Vinylite VAGH, Vinylite VROH, CAB 551-001, and others
• Compatible with IPDI adduct T 1890 S

Storage:

• Can be stored under appropriate conditions for at least one year

Overall, SYNTHALAT-A 090 is suitable for applications requiring durable coatings on plastics, offering good adhesion, flexibility, and weather resistance.

SYNTHALAT-A 086 HS (formerly SA TH 1567) is a hydroxyfunctional acrylic resin primarily used in combination with (cyclo-) aliphatic polyisocyanates for air- and forced-drying two-pack coatings. It is designed for general industrial coatings requiring high abrasion resistance, chemical resistance, and weather resistance. Here's a summary of its characteristics and properties:

Characteristics:

• Delivery form: 75% in Butylacetate
• Application: Suitable for air- and forced-drying two-pack coatings
• Other properties: Quick drying, very good adhesion on different substrates and metals
• VOC (volatile organic compounds) as top-coat: Approximately 470 g/l at 21 sec

Measurements:

• Hydroxyl number: 80 - 100
• Hydroxyl content: Approximately 2.6% (relative to non-volatile content)
• Viscosity (at 23°C): 14,000 – 22,000 mPas (in delivery form)
• Color (Hazen): < 80
• Non-volatile content: 75 +/- 1% (in delivery form)
• Flash point: 24 - 30°C
• Density: 1.02 – 1.06 g/ml (in delivery form)

SYNTHALAT-A 086 HS is suitable for various industrial applications where high-performance coatings are required, offering a balance of properties such as durability, adhesion, and resistance to abrasion and chemicals.

SYNTHALAT A 078 HV is a polyisocyanate-curing acrylic resin primarily used in two-pack coatings, which are air- and oven-drying in combination with aliphatic polyisocyanates. It offers good mechanical properties, resistance to chemical attack, and weathering. Here's a summary of its characteristics and properties:

Characteristics:

• Supplied as: 65% in shellsol A
• Hydroxyl value: 80-95
• Hydroxyl content: Approximately 2.6% (relative to non-volatile content)
• Viscosity (as supplied): 10,000-15,000 mPas
• Gardner colour value: < 2 (as supplied)
• Non-volatile content: 65 +/- 1%
• Flash point: Approximately 40°C
• Density: 1.01 g/ml

Pigmentation: Any neutral pigments or fillers are suitable for pigmentation with SYNTHALAT A 078 HV. However, basic pigments and pigments containing soluble metal compounds may affect curing and shorten the pot life of coating batches once mixed.

Mixing Ratio with Polyisocyanates: Based on an equivalent reaction of the reactive groups (NCO : OH = 1 : 1), the recommended mixing ratio with polyisocyanates is calculated using the provided formula.

Solubility/Dilutability: SYNTHALAT A 078 HV can be thinned with various solvents, including ethyl acetate, butyl acetate, xylene, etc. Only non-aqueous solvents and those containing no hydroxyl groups may be used.

Compatibility: SYNTHALAT A 078 HV exhibits compatibility with various other products, as listed in the compatibility table. It is compatible with Synthalat A 045, A 055, A 065, A 060, A 077, A 085, A 088 "MS," A 090, A 135, A 141 HS, A 150, A 1613, A 1633, A 1653, Synthoester HD-080, HD 170 HS, NC chips E 510, and others.

SYNTHALAT A 077 is a polyisocyanate-curing acrylic resin primarily used in two-pack coatings, which are air- and oven-drying in combination with aliphatic polyisocyanates. It offers good mechanical properties, resistance to chemical attack, and weathering. Here's a breakdown of its characteristics and properties:

Characteristics:

• Supplied as: A = 60% in shellsol A, B = 60% in xylene
• Hydroxyl value: 80-100
• Hydroxyl content: Approximately 2.6% (relative to non-volatile content)
• Flow time in seconds (50% in Shellsol A): 50-60
• Viscosity (as supplied): 1300-2300 mPas
• Gardner colour value: A (50% in Shellsol A) < 2, B (as supplied) < 2
• Non-volatile content: 60 +/- 1%
• Flash point: A: Approximately 40°C, B: Approximately 24°C
• Density: A: 0.983 g/ml, B: 1.01 g/ml

Pigmentation: Any neutral pigments or fillers are suitable for pigmentation with SYNTHALAT A 077. However, basic pigments and pigments containing soluble metal compounds may affect curing and shorten the pot life of coating batches once mixed.

Mixing Ratio with Polyisocyanates: Based on an equivalent reaction of the reactive groups (NCO : OH = 1 : 1), the recommended mixing ratio with polyisocyanates is calculated using the provided formula.

Solubility/Dilutability: SYNTHALAT A 077 can be thinned with various solvents, including ethyl acetate, butyl acetate, xylene, etc. Only non-aqueous solvents and those containing no hydroxyl groups may be used.

Compatibility: SYNTHALAT A 077 exhibits compatibility with various other products, as listed in the compatibility table. It is compatible with Synthalat A 045, A 055, A 065, A 060, A 085, A 088 "MS," A 090, A 135, A 141 HS, A 150, A 1613, A 1633, A 1653, Synthoester HD-080, HD 170 HS, NC chips E 510, and others.

Shelf-life: When properly stored, SYNTHALAT A 077 has a shelf life of at least one year.