SETAQUA® PAVE 700

Setaqua Pave 700 is an APEO (alkylphenol ethoxylate) free acrylic polymer designed for use in water-based paving paints. Here are some key details about this product:

Description: Setaqua Pave 700 is a fine particle size acrylic polymer with ambient temperature cross-link capability. It is formulated to be used in air-dry, water-based paving paints for application to concrete surfaces in domestic settings.

Application: This product is recommended for coating surfaces such as garage floors, driveways, and footpaths. Coatings based on Setaqua Pave 700 offer excellent wet and dry hot tire resistance, durability, and adhesion to properly prepared cementitious surfaces.

Typical Properties:

• Appearance: Milky white emulsion
• Solids content (wt %): 40
• pH (at 25°C): 8.8
• Viscosity (Brookfield VT 1/30): 50 cP
• Minimum film-forming temperature (MFFT): 49°C
• Specific Gravity: 1.04
• Particle size (median): 0.1 μm
• Particle Charge: Anionic

Storage: Setaqua Pave 700 should be stored under cover, away from direct sunlight, and avoiding extreme temperature changes. Sealed, unopened containers stored under normal conditions (5 − 35°C) have a shelf life of 12 months from the date of manufacture. If stored for longer than 12 months, it's recommended to recheck the product for suitability in the intended application.

Safety: Before handling or using Setaqua Pave 700, it's important to refer to the Safety Data Sheet (SDS) for proper safety guidelines.

Overall, Setaqua Pave 700 is designed to provide a durable and adhesive coating for concrete surfaces, offering excellent resistance to tire traffic and environmental factors.