Deuteron ST100

Deuteron ST 100 is a thermoplastic texturing agent produced by Deuteron GmbH. Here are its key characteristics:

• Material: Deuteron ST 100 is made of HDPE (High-Density Polyethylene).
• Particle Size: The particle size distribution is specified with a dv50 (median particle size) of approximately 150 µm and a dv90 (90th percentile particle size) of approximately 220 µm.
• Density: It has an approximate density of 0.96 g/cm³.
• Melting Range: Deuteron ST 100 has a melting range of 126-130 °C.
• Appearance: It appears as a coarse white powder.

Product Description: Deuteron ST 100 is a coarse plastic powder used for creating distinct surface structures. It serves as a texture and structuring agent, providing functional, haptic, and decorative effects. Similar to other variants in the Deuteron ST series, the final appearance of the surface texture depends on the applied layer thickness and the ratio of the texturing agent to binder. It offers versatility in creating effects ranging from rough, fragmentary structures to closed particle layers with matte surfaces.

Applications: Deuteron ST 100 can be used in various applications within coatings and inks. Its particle size distribution allows for precise adjustments of the final appearance and roughness. Additionally, it can be combined with other surface additives such as matting agents or waxes. It is suitable for solvent-based, solvent-free, and water-based systems.

Dosage: The recommended dosage of Deuteron ST 100 ranges from 1% to 15% calculated on the complete formulation, depending on the binder, application, and desired properties. The optimum dosage should be determined through testing and depends on factors like binder solids ratio and layer thickness.

Processing: Deuteron ST 100 is easy to use and typically does not require high shear forces or wetting agents during processing. However, grinding should be avoided.

Storage Conditions: It should be stored in dry conditions at room temperature for up to 24 months, with a maximum storage temperature of 35°C.

Safety: According to Regulation (EC) No. 1272/2008, Deuteron ST 100 is not classified as a dangerous product and does not require specific labeling. However, it's recommended to refer to the Safety Data Sheet and Regulatory Information Sheet for detailed safety information.