Archives: Listings

Borchi® Gol E2

Borchi® Gol E2 is a silicone-free flow promoter and air release agent used in solvent-based and solvent-free paint systems. Here's a breakdown of its characteristics and applications:
Description:
- Borchi® Gol E2 is a polymeric additive designed to improve flow properties and air release in air- and forced-drying paints, as well as cross-linking coating systems.
- It is a surface-active liquid with a clear to turbid appearance, typically yellow-brown in color.
Characteristic Data:
- Appearance: Clear to turbid, very high-viscous, yellow-brown liquid
- Color: Gardner: 2 - 8 (ISO 4630)
- Acid number: Max. 2 mg KOH/g (ISO 3682)
- Density: 0.870 - 0.910 g/cm³ (DIN 51757, 20°C)
- Viscosity: Max. 2000 mPa·s (ISO 3219 (A), 20°C)
- Solvent: Mineral oil
Properties:
- Acts as a surface-active, polymeric additive to eliminate flow defects and craters caused by air entrapment in solvent-based or solvent-free systems.
Applications:
- Suitable for use in all solvent-containing and solvent-free, single and multi-component paints.
- Efficacy depends on the binder type, mixing conditions, and application method.
Dosage:
- Can be added to the mill base or finished paint.
- Recommended dosage is 0.5 to 2.0% of the total weight of the formulation, depending on the binder system and the property being addressed.
- Excessive amounts should be avoided to prevent reduced film hardness, loss of adhesion, and recoat problems.
Storage:
- Store at temperatures below 50°C and protect from the effects of weathering.
- Containers should be resealed immediately after each use.

BAYFERROX® 318 M

BAYFERROX 318 M is an inorganic pigment, specifically a type of iron oxide pigment, used in various applications such as coatings, paints, plastics, and construction materials. Here's a summary of its Material Safety Data Sheet (MSDS):
Product Name: BAYFERROX 318 M Material Number: 00006815 CI Name: 77499 (Color Index name)
Supplier/Manufacturer: LANXESS, Inc. 1265 Vidal Street South Sarnia, Ontario N7T 7M2 Canada Emergency Contact:
- Canutec (Canada): (613) 996-6666
- International: (703) 527-3887
- Lanxess Emergency: (519) 337-1907
- For information (US/Canada): (800) LANXESS, International: +1 412 809 1000
Physical State: Solid (powders) Odor: Odorless Color: Black
Composition/Information on Ingredients:
- Manganese: 1 - 5%
Hazards Identification:
- Routes of Entry: Dermal contact, Eye contact, Inhalation, Ingestion
- Potential Acute Health Effects/Over-exposure Signs/Symptoms: May cause mechanical irritation (abrasion). Exposure to airborne concentrations above statutory or recommended exposure limits may cause irritation of the nose, throat, lungs, and eyes.
First Aid Measures:
- Eye Contact: Flush eyes with plenty of lukewarm water. Get medical attention if symptoms occur.
- Skin Contact: Wash with plenty of soap and water. Get medical attention if symptoms occur.
- Inhalation: Remove to fresh air. Get medical attention if symptoms occur.
- Ingestion: Wash out mouth with water. Do not induce vomiting unless directed by medical personnel. Get medical attention if symptoms occur.
Fire-Fighting Measures:
- Suitable Extinguishing Media: Use an extinguishing agent suitable for the surrounding fire.
- Hazardous Thermal Decomposition Products: Decomposition products may include metal oxide/oxides.
Accidental Release Measures:
- Personal Precautions: Use appropriate personal protection equipment. Avoid creating dusty conditions and prevent wind dispersal.
Handling and Storage:
- Handling: Use only with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing dust.
- Storage: Store in original container protected from direct sunlight in a dry, cool, and well-ventilated area, away from incompatible materials and food/drink. Keep container tightly closed and sealed until ready for use.

KRONOS® 2160

KRONOS® 2160 is a type of titanium dioxide used primarily in coatings for its excellent properties. Here's a breakdown of its characteristics and applications:
Applications:
- Meets high demands for outdoor durability.
- Imparts high brightness and a neutral tone in white finishes.
- Produces clean tints in colored coatings.
- Provides good hiding power and tinting strength.
Properties:
- Suitable for various applications including white and colored automotive finishes, coil coatings, powder coatings, high-quality industrial coatings, and PVC compounds for outdoor use.
- Produced as a rutile pigment using the chloride process.
- Contains over 90.5% titanium dioxide content.
- Standard classification: R 2 according to DIN EN ISO 591-1 and ASTM D 476 Type IV & V.
- Density: 3.9 g/cm3.
- Bulking value: 0.0308 gal/lb.
- Oil absorption: 18 g/100 g pigment.
- Color index: Pigment White 6 (77891).

Borchi® Set 134

Borchi® Set 134 is an anti-settling agent and viscosity modifier for solvent-based coatings, particularly useful for paints containing dense pigments like barium sulfate and zinc dust. Here's a breakdown of its characteristics and applications:
Description:
- Borchi® Set 134 is designed to prevent hard settling of coatings and act as a viscosity modifier.
- It comes in a greenish paste form with a density ranging from 0.940 to 0.980 g/cm³.
Properties:
- It is easily incorporated into coatings using conventional high shear dispersing equipment.
- Increases sag resistance while inhibiting hard settling.
- Exhibits thixotropic properties unaffected by temperature changes.
- Does not impact dry speed, hardness, gloss, or weathering resistance of the cured film.
Applications:
- Acts as a suspending agent for fillers, heavy pigments, and metal powders, particularly in zinc-rich paints.
- Wet out the zinc dust and inhibits water contact, preventing gassing during application.
- Can be used as a thickener for paints based on epoxy, epoxy ester, alkyd, chlorinated rubber, vinyl resin polymers/copolymers, and polyurethanes.
Dosage:
- Can be added at any stage of the formulation, though addition to the mill base is recommended.
- Typical usage levels range from 1 to 3% of the total weight of the formulation.
- Optimum dosage depends on the binders, pigments, and fillers used and should be determined experimentally.
Storage:
- Should be protected from weathering effects and stored at temperatures between 5 and 30 °C.
- Containers should be resealed immediately after each removal of the product.

Borchers

SETAL® D RD 181 BA

SETAL® D RD 181 BA is a type of polyester polyol with a hydroxyl content of approximately 4.9% on solid resin. It is primarily used as a co-reactant for polyisocyanates in the formulation of two-component polyurethane coatings. The product is supplied at around 75% concentration in butyl acetate.
Here are some key specifications and properties:
- Non-volatile content: 75 ± 1%
- Viscosity at 23°C: 4500 ± 1000 mPa·s
- Acid value in supply form: ≤ 12 mg KOH/g
- Hydroxyl content in supply form: 3.7 ± 0.4%
- Hazen colour value: ≤ 150
- Water content: ≤ 0.1%
- Equivalent weight in supply form: approximately 460 g/eq
- Density at 20°C: approximately 1.10 g/cm3
- Flash point: approximately 30°C
It's suitable for formulating coatings for wood applications such as boats and parquet flooring. SETAL D RD 181 BA can be thinned with various solvents like esters, ketones, glycol esters, and aromatic hydrocarbons, but the stability of the solutions formed should be tested. Compatibility with other polyesters and Desmodur grades is generally good, although compatibility testing is recommended due to the wide range of products available.
Storage should be in originally sealed containers at temperatures not exceeding 30°C, with a standard shelf life of 730 days from the date of manufacturing. The Safety Data Sheet should be consulted for safety-relevant information and any updates related to classification, labeling, and application methods.

LUCRAFOAM DNE

LUCRAFOAM DNE 01 is a high-efficient mineral oil-based defoamer manufactured by LEVACO Chemicals. Here's an overview:
Product Description: LUCRAFOAM DNE 01 is a 100% active defoamer specifically designed for various applications such as pigment grinding, flatting coatings, and high-filled waterborne systems. It is formulated to efficiently control foam formation in these systems, thereby improving process efficiency and product quality.
Properties:
- Product Type: Defoamers / Anti-foaming Agents
- Chemical Composition: Mineral oil-based defoamer
- Product Status: Commercially available
- Applications: Primarily recommended for waterborne coatings
- Bio-Based: Not derived from renewable sources
Key Features:
- High efficiency in controlling foam formation
- 100% active ingredient
- Silicone-free formulation
- Especially suitable for pigment grinding, flatting coatings, and high-filled waterborne systems
Usage: LUCRAFOAM DNE 01 can be directly incorporated into various waterborne coating formulations to effectively mitigate foam-related issues. Its mineral oil-based composition ensures compatibility with a wide range of systems.
Overall, LUCRAFOAM DNE 01 serves as a valuable additive in coating formulations, contributing to enhanced process performance and product quality by effectively managing foam formation.

DOWANOL™ DPM

DOWANOL™ DPM, also known as dipropylene glycol methyl ether, is a mid-to-slow evaporating solvent with 100% water solubility. Here are some key points about this product:
Product Description: DOWANOL™ DPM is a hydrophilic solvent primarily used as a coupling agent in various solvent systems. It has a higher flash point compared to DOWANOL™ PM glycol ether, making it easier to handle, store, and ship. Its hydrophilic nature makes it suitable for preventing shocking in latex emulsion coatings and as a coupling aid in water reducible coatings and cleaning applications.
Applications:
- Coupling agent for water-based dilutable coatings
- Active solvent for solvent-based coatings
- Coupling agent and solvent in household and industrial cleaners, grease and paint removers, metal cleaners, and hard surface cleaners
- Tail solvent for solvent-based gravure and flexographic printing inks
- Primary solvent in solvent-based silk screen printing inks
- Coupling agent in solvent blends for various printing inks
- Coupling agent and solvent for vat dyeing fabrics
- Mutual solvent, coupling agent, and emollient in cosmetic formulations
- Stabilizer for agricultural herbicides
- Coalescent for floor polishes and finishes
Physical Properties:
- Molecular Weight: 148.2 g/mol
- Boiling Point: 190°C (374°F)
- Flash Point: 75°C (167°F)
- Freezing Point: -83°C (-117°F)
- Specific Gravity: 0.951 (25/25°C)
- Vapor Density: 5.11
- Viscosity: 3.7 cP or mPa•s @ 25°C
- Surface Tension: 68.7 dynes/cm or mN/m @ 20°C
- Solubility: Solvent in water (100%)
Packaging and Transport: DOWANOL™ DPM is supplied in various packaging options depending on the region. It is typically transported in bulk, drums, tank trucks, or tank cars.
This product is commonly used in various industries for its solvent properties and compatibility with water-based formulations. However, it's essential for formulators to ensure compliance with regulations and proper handling practices.

Tego Foamex 822

TEGO® Foamex 822 is a defoamer and deaerator designed for waterborne formulations. Here's a breakdown of its key features and applications:
Description: TEGO® Foamex 822 is an emulsion based on polyether siloxane technology, providing a good balance of compatibility and long-term effectiveness in waterborne formulations.
Key Benefits:
- Suitable for clear formulations
- Highly suitable for sensitive waterborne formulations
- Very good as a combination partner with defoamer concentrates
Application Recommendation:
- Brush application/roller application
- Airless spraying
- Compressed air spraying
- Flexo/gravure printing
- Dip coating, flow coating, curtain coating
- Flooring
Suitability:
- Suitable for waterborne formulations
- Not suitable for solventborne formulations or 2-pack 100% radiation-curing systems
Typical Applications:
- Plastic coatings
- Wood coatings
- Parquet coatings
- Transportation coatings
Technical Data:
- Active matter content: 20%
- Appearance: White thixotropic liquid
- Chemical description: Emulsion of a polyether siloxane copolymer, contains fumed silica
- Solvent: Solvent-free
Solubility: For stability reasons, emulsions may not be diluted by organic solvents.
Recommended Addition Level: As supplied, calculated on the total formulation: 0.1 - 1.0%
Processing Instructions:
- Mix briefly with low shear forces before use.
- Addition to the coating as supplied.
- Long-term effectiveness depends on the formulation and should be tested in individual formulations.
Handling & Storage:
- Store in the original unopened packaging between +4°C and +40°C.
- Shelf life of 12 months from the date of manufacture.
- Keep away from freezing.
TEGO® Foamex 822 provides effective defoaming and deaerating properties for waterborne formulations, contributing to improved performance in various coating applications.

ALBERDINGK® AC 25381

ALBERDINGK® AC 25381 is an aqueous dispersion characterized by being a core-shell, fine disperse copolymer that is self-crosslinking and free from plasticizers and protective colloids. Here are some key details about this product:
- Minimum Film Forming Temperature (MFFT): 9°C
- Multi-phase: Yes
- Self-crosslinking (SXL): Yes
- Solids Content: 47.0 - 49.0%
- Viscosity (Brookfield RVT): 2,000 - 8,000 mPas
- pH-value: 7.5 - 8.5
It finds applications in various industries, including:
- Building & Construction
  - Trimpaints
  - Flooring (Concrete, Parquet)
- Packaging (Film & foil coating, Plastic)
  - Plastic materials like ABS, BOPP, PA 6, PA 6.6, PC, PVC (flexible and rigid)
- Wood industry (Furniture pigmented, Furniture transparent, Glaze, Parquet)
This dispersion is designed to provide excellent properties for coating and finishing applications in these industries.