Archives: Listings

Acematt® HK 440

ACEMATT® HK 440 is a matting agent manufactured by Evonik Operations GmbH. It is an untreated, extremely coarse particle-sized precipitated silica, specifically recommended for various coating applications such as basecoats, thick-film applications, and general industrial coatings. Here's a breakdown of its key features and specifications:
Key Benefits:
- Highly efficient matting agent.
- Provides a very low sheen finish.
- Highly suitable for coil coatings.
Effect:
- Matting efficiency
- Transparency
- Viscosity
- Smoothness/Haptic
- Sedimentation behavior
Suitability:
- Suitable for waterborne, solvent-borne, and radiation-curing coatings.
- Suitable for high solids pigmented coatings and clear coatings.
Typical Applications:
- Coil coatings
- General industrial coatings
- Floor coatings
- Architectural paints
Technical Data:
- DOA absorption: 270 ml/100g
- Grindometer value: 43 µm
- Particle size, d50: 14.5 µm
- pH-value: 6.0
- Specific surface area (N2): 500 m²/g
Recommended Addition Level:
- As supplied, calculated on total formulation: 1.5 - 5.0%
Processing Instructions:
- Addition to the coating as supplied or as a predilution is possible.
Handling & Storage:
- Shelf life: 24 months from the date of manufacture when stored in original unopened packaging.
- Store the product in closed containers under dry conditions and protect it from volatile substances.

Durcal® 5

DURCAL 5 is a product manufactured by Omya, and it's a type of calcium carbonate (limestone) used as a mineral filler and pigment. Here are some details about it:
- Product Type: It falls under the category of fillers, specifically calcium carbonates (ground).
- Chemical Composition: DURCAL 5 is primarily composed of calcium carbonate.
- CAS Number: The Chemical Abstracts Service (CAS) numbers for DURCAL 5 are 1317-65-3 and 14808-60-7.
- Masterbatch: It's not available as a masterbatch.
- Physical Form: DURCAL 5 is in powder form.
- Appearance: It appears white.
- Product Status: The availability is not confirmed (as indicated by the asterisk).
- Labels/Agency Rating: It complies with the Toxic Substances Control Act (TSCA) and Domestic Substance List (DSL).
Properties of DURCAL 5:
- Density: 2.7 g/l
- Solubility: It is soluble in water at 18°C, with a concentration of 1.3 mg per 100 g of water.
DURCAL 5 serves as a mineral filler and pigment, commonly used in various applications such as coatings, plastics, and rubber products.

Stapa® IL Hydrolan 801

STAPA IL HYDROLAN 801 55900/G Aluminium Paste is a pigment paste consisting of flaky aluminum powder made from pure aluminum (minimum 99.5% according to EN 576) with an inorganic coating.
Here are some key characteristics:
- Specific gravity: Approximately 1.4 kg/l
- Solvent: Isopropanol (IL) including lubricant and additives
- Pigment composition: Aluminum approximately 54%, coating approximately 6%
- Pigment content (non-volatile): 58.0 - 62.0%
- Volatile content: 38.0 - 42.0%
- Sieving (< 63 µm): 99.9 - 100.0%
- Particle size distribution (D 10, D 50, D 90): 2.0 - 6.0 µm, 11.0 - 17.0 µm, 27.0 - 35.0 µm respectively
- Aqueous paint spray-out: OK
- Total shelf life: 24 months
- EC-safety data sheet number: 005700ZZ2

Heliogen® Green L 8730

Heliogen® Green L 8730 is an organic pigment belonging to the chromatic yellowish phthalocyanine greens category (P.G. 7) with high color strength. It is commonly used in the coatings industry, particularly in solvent- and water-based paint formulations for decorative, industrial, and automotive applications.
Key Features:
- Color Space: Green
- Product Group: Organic Pigment
- Brand: Heliogen®
- Colour Index™: P.G. 7
- Chemistry: Cu-phthalocyanine, chlorinated
- Performance: Exterior
- Specific Requirements: Heat Management
- Sustainability: Heat Management
Recommended Applications:
- Suitable for solvent- and water-borne coatings, including automotive and industrial coatings.
- Known as an industry benchmark with high chroma and excellent dispersibility.

Hostaperm violet RL special

Hostaperm violet RL special - PV 23 is a dioxazine pigment, specifically Pigment Violet 23, designed for use in paints and coatings. Here's a summary of its characteristics and applications:
Product Description:
- It's a blue-shade, very strong dioxazine pigment known for its exceptional fastness properties.
- Highly recommended for shading purposes to impart a redder hue to phthalocyanine blue-based solid- and effect-shade paints.
Benefits:
- Very high weather fastness
- Very high overspray fastness
- High tinting strength and brilliance
Application Profile:
- Automotive coatings
- Industrial coatings
- Decorative paints
Special Recommendations:
- Suitable for various types of coatings including air-drying alkyds, physically drying paints, baking enamels, acid-cured paints, amine-cured epoxies, isocyanate-cured paints, and water-based paints.
Physical Data:
- Density: 1.49 g/cm3
- Form of Supply: Powder
- Specific surface: 80 m2/g
- Oil absorption: 78 ml/100g
- Average Size of Primary Particles: 50 nm
- Heat Stability: 160°C
Fastness Data:
- Good lightfastness and weather resistance, with ratings of 8 after 12 months and 24 months for both full and deep shades.
- Resistant to acids, water, alkali, and various solvents.
- No blooming observed.
- Good fastness to overpainting.
Safety & MSDS:
- Clariant provides safety information and Material Safety Data Sheets (MSDS) upon request for handling and storing the product safely.
Overall, Hostaperm Violet RL spec. is a high-performance pigment suitable for a wide range of paint and coating applications, offering excellent color properties and durability.

Texanol

Eastman Texanol™ Ester Alcohol is a versatile chemical compound with a wide range of applications across various industries. Here's a breakdown of its key attributes and properties:
Applications:
- Adhesives/sealants
- Architectural coatings
- Auto refinish
- Automotive
- Commercial printing inks
- Exterior architectural coatings
- General industrial coatings
- Interior flat architectural coatings
- Interior non-flat architectural coatings
- Lithographic printing inks
- Paints & coatings
- Polymer modification
- Process additives
- Protective coatings
- Road markings
- Wood coatings
Key Attributes:
- Ease of addition to latex paints: Texanol™ is easy to incorporate into latex paints and enhances their performance.
- Efficient coalescent: It facilitates the proper film formation of latex paints, enhancing properties like low-temperature coalescence, scrub resistance, and washability.
- Excellent hydrolytic stability: It maintains its performance even under different weather conditions and over substrates with varying levels of porosity.
- Inert - Nonfood use: Suitable for various industrial applications.
- LVP-VOC: Classified as a Low-VOC (Volatile Organic Compound).
- Low flammability rating: Reduces the risk of fire hazards.
- Low freezing point: Maintains fluidity even at low temperatures.
- Low water solubility: Exhibits low solubility in water.
- Non-HAP (Hazardous Air Pollutant): Does not contain hazardous air pollutants.
- Non-SARA: Not classified under the Superfund Amendments and Reauthorization Act.
- REACH compliant: Complies with the European Union's REACH regulation.
- Readily biodegradable: Environmentally friendly and biodegradable.
- Recognized by China with "Green Label II" certificate: Acknowledged for its low toxicity, non-VOC status, and environmental friendliness.
Typical Properties:
- Boiling Point: 254°C
- Flash Point: 120°C
- Freezing Point: -50°C
- Refractive Index: 1.4423
- Specific Gravity: 0.95 @ 20°C/20°C
- Surface Tension: 28.9 dynes/cm @ 20°C
- Vapor Pressure: 0.0013 kPa @ 20°C
- Solubility: 0.1% in water @ 20°C
Texanol™ Ester Alcohol is a valuable ingredient in various coatings, inks, adhesives, and other chemical applications due to its excellent performance and environmental properties.

ENCOR® 2322

ENCOR® 2322 is a universal binder formulated without alkylphenolethoxylates, primarily used in the formulation of interior and exterior plasters and wall paints. It offers several performance benefits:
- Good durability: Provides long-lasting performance for both interior and exterior applications.
- Good application properties: Facilitates easy application, ensuring smooth and uniform coating.
- Good balanced properties: Offers a balanced combination of various properties necessary for effective coating performance.
Here are some specifications and characteristics of ENCOR® 2322:
- Polymer Type: Vinyl Versatate Emulsion
- Solid Content at 80°C (%): 49 - 51
- pH: 4.0 - 5.0
- Viscosity at 23°C (mPa.s): 3000 - 6000
- Minimum Film Formation Temperature (°C): < 5
- Density / Specific Gravity (g/ml): 1.04
- Average Particle size (nm): 300
- Freeze Thaw Stability (°C): -5

CRAYVALLAC® LA-250

CRAYVALLAC® LA-250 is a liquid rheology modifier primarily designed for post-addition to low polarity solvent-based coatings. It's a modified urea dissolved in DMSO (Dimethyl Sulfoxide), presenting as a clear liquid. Here are some key details about it:
- Nature: Urea urethane
- Appearance: Clear liquid
- Solid Content (%): 45
- Active Content (%): 45
- Solvent: DMSO (Dimethyl Sulfoxide)
- Recommended Addition Level: 0.5-2.0% under low shear dispersion, post-addition.
- Standard Packaging: Available in 200 Kg Drums or 25 Kg Pails.
- Handling & Storage: It should be stored in original containers in a dry place at temperatures between 20°C (68°F) and 30°C (86°F). Corrosion-resistant storage tanks and piping are recommended. Containers must be tightly closed after use to exclude moisture.
- Processing Instructions: It should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Elevated temperatures are not required for activation, and excessive shear should be avoided.
- Market: Primarily used in Coatings & Inks, including architectural coating, graphic arts, industrial coating, textile & leather coating, as well as adhesives & sealants.
- Key Benefits: Easy handling, post-addition capability, ready to use, antisettling, in-can appearance improvement, syneresis resistance, viscosity stability, brushability, rollability, temperature resistance, edge-coverage sag sprayability resistance.
- Film Properties: Enhances gloss, leveling, transparency, pigment orientation.
- APEO free: Yes
- Bacteria resistance: Yes
- Thickening Mechanism: Non-associative
- Viscosity Contribution: Low shear contribution
Overall, CRAYVALLAC® LA-250 provides various benefits to coatings, inks, adhesives, and sealants, improving their performance and processing characteristics. It offers versatility and ease of use in a range of applications within the mentioned industries.

SPIRDANE® D 40

SPIRDANE® D 40, produced by TotalEnergies, is a type of aromatic (C9-C11) white spirit with a very low level of aromatic compounds. It is primarily used as a solvent in coatings, particularly in paints. This grade is characterized by its low toxicological and eco-toxicological values, making it suitable for various applications where safety and environmental concerns are paramount.
Product Type: Solvents > Hydrocarbons, Aromatics (Isoparaffinic)
Chemical Composition: White spirit
CAS Number: 64742-48-9
Product Status: Commercial
Applications/Recommended for: Coatings
Labels/Agency Rating: Complies with EU Directive 2004/42/EC
SPIRDANE® D 40 Properties:
- Evaporation Rate (ether=1): 29 (DIN 53170)
- Flash Point: 43°C (Pensky–Martens Closed Cup, ASTM D93)
- Density: 790 kg/m³ (At 15°C, ISO 12185)
- Vapor Pressure: 0.209 kPa (At 20°C)
- Viscosity: 1.3 mm²/s (At 20°C, ASTM D445)
- Surface Tension: 23.7 mN/m (At 20°C, NF EN 14370)
- Aniline Point: 63°C (ASTM D611)
- Aromatic Content: < 20 mg/kg (UV Internal method)
- Benzene Content: < 1 mg/kg (ASTM D6229)
- Boiling Point: 154 - 193°C (ASTM D86)
- Color, Saybolt: 30 (ASTM D156)
- Refractive Index: 1.4323 (At 20°C, ASTM D1218)
These properties indicate SPIRDANE® D 40's suitability for various coating applications, meeting regulatory standards while offering desirable characteristics such as controlled evaporation, low flammability, and appropriate viscosity.

Archives: Listings

Acematt® HK 440

Durcal® 5

Stapa® IL Hydrolan 801

Heliogen® Green L 8730

Hostaperm violet RL special

Texanol

ENCOR® 2322

CRAYVALLAC® LA-250

SPIRDANE® D 40

Total Energies