Archives: Listings

Acrylic high gloss white top coat

This formulation is designed to produce a high gloss white top coat with excellent opacity, durability, and application properties. It utilizes a combination of components to achieve desired characteristics, including binders, pigments, rheology modifiers, and additives for stability and performance.
Components and Their Functions:
1. Water
  - Function: Serves as a vehicle for other components, aiding in dispersion and application.
2. Dispersing Agent (Ammonium-salt Polyacrylate Dispex AA 4040)
  - Function: Facilitates the dispersion of pigments and fillers, ensuring uniform color development.
3. Foam Control Agent (Emulsion of polysiloxanes Drew™ 210-886)
  - Function: Controls foam formation during mixing and application, contributing to a smooth finish.
4. Biocide (Nuosept BIC)
  - Function: In-can preservative, preventing microbial growth within the paint.
5. Co-solvent (propaan-1,2-diol Propylene Glycol)
  - Function: Enhances the solubility of other components, improving formulation stability.
6. Neutralizing Agent (Alkaline pHLEX™ 400)
  - Function: Adjusts the pH of the formulation for optimal performance.
7. Pigment (Titanium dioxide Tioxide R-HD2)
  - Function: Primary pigment providing opacity and brightness to the coating.
8. Binder (Acrylic Latex Primal HG-74D)
  - Function: Forms a film that adheres to the substrate, providing adhesion and durability to the coating.
9. NSAT Rheology Modifiers (Aquaflow™ XLS-500E and Aquaflow™ NHS-300E)
  - Function: Adjust the viscosity and flow behavior of the paint, improving application properties.
Viscosity Properties:
- Brookfield (20/4): 3800 mPa·s
- Stormer: 103 KU
- ICI: 180 mPa·s
- Leveling (Leneta): 10 (1-10; 10=Best)
- Sag Resistance: 300 micron
- Gloss (60°): 80 GU
(All viscosities are measured at 25°C)

High gloss white top coat formula

This formulation is designed to produce a high gloss white top coat with excellent opacity, durability, and application properties. It utilizes a combination of components to achieve desired characteristics, including binders, pigments, rheology modifiers, and additives for stability and performance.
Components and Their Functions:
1. Water
  - Function: Serves as a vehicle for other components, aiding in dispersion and application.
2. Dispersing Agent (Ammonium-salt Polyacrylate Dispex AA 4040)
  - Function: Facilitates the dispersion of pigments and fillers, ensuring uniform color development.
3. Foam Control Agent (Emulsion of polysiloxanes Drew™ 210-886)
  - Function: Controls foam formation during mixing and application, contributing to a smooth finish.
4. Biocide (Nuosept BIC)
  - Function: In-can preservative, preventing microbial growth within the paint.
5. Co-solvent (Propaan-1,2-diol Propylene Glycol)
  - Function: Enhances the solubility of other components, improving formulation stability.
6. Neutralizing Agent (Alkaline pHLEX™ 400)
  - Function: Adjusts the pH of the formulation for optimal performance.
7. Pigment (Titanium dioxide Tioxide R-HD2)
  - Function: Primary pigment providing opacity and brightness to the coating.
8. Binder (Acrylic Latex Primal HG-74D)
  - Function: Forms a film that adheres to the substrate, providing adhesion and durability to the coating.
9. NSAT Rheology Modifiers (Aquaflow™ NMS-450E and Aquaflow™ NHS-350E)
  - Function: Adjust the viscosity and flow behavior of the paint, improving application properties.
Viscosity Properties:
- Brookfield (20/4): 3850 mPa·s
- Stormer: 103 KU
- ICI: 200 mPa·s
- Leveling (Leneta): 10 (1-10; 10=Best)
- Sag Resistance: 300 micron
- Gloss (60°): 84 GU
(All viscosities are measured at 25°C)

High Gloss White Top Coat - Higher Solids

This formulation is tailored for a high gloss white top coat with increased solids content, aiming to deliver a durable and lustrous finish with improved coverage and opacity. It incorporates a range of components to optimize its properties and performance, including binders, pigments, rheology modifiers, and additives for stability and application characteristics.
Components and Their Functions:
1. Water
  - Function: Acts as a vehicle for other components, facilitating dispersion and application.
2. Biocide (Nuosept BIC)
  - Function: In-can preservative, preventing microbial growth within the paint.
3. Foam Control Agent (Drew™ 210-886)
  - Function: Manages foam formation during mixing and application, ensuring a smooth finish.
4. Wetting/Dispersing Agent (Disperbyk 190)
  - Function: Promotes the dispersion of pigments and fillers, facilitating uniform distribution and color development.
5. Rheology Modifiers (NSAT Aquaflow™ NMS-450E)
  - Function: Adjusts the viscosity and flow behavior of the paint, enhancing its application properties.
6. Pigment (Titanium Dioxide Kronos 2190)
  - Function: Primary pigment providing opacity, brightness, and whiteness to the coating.
7. Binder (Alkyd Emulsion Uradil AZ 785-Z52)
  - Function: Forms a film that adheres to the substrate, providing adhesion and durability to the coating.
8. Dryer (Non-carboxylate iron complex Borchi OXY-coat 1101)
  - Function: Accelerates the drying process, promoting faster film formation and curing.
9. Substrate Wetting Agent (Silicon based Surfactant BYK 347)
  - Function: Improves the wetting of the substrate, ensuring proper adhesion and coverage.
10. Surfactant (Phosphate ester Dextrol™ OC-180HS)
  - Function: Aids in wetting and dispersion, enhancing the performance of other additives.
11. Total Solids Content: Higher solids content compared to standard formulations, contributing to improved film build and coverage.
Viscosity Properties:
- Brookfield (20/4): 2450 mPa·s
- Stormer: 92 KU
- ICI: 305 mPa·s
- Leveling (Brush): 8 (1-10; 10=Best)
- Sag Resistance: 600 micron
- Gloss (60°): 97 GU
(All viscosities are measured at 25°C)

High gloss white coat paint formula

This formulation is for a high gloss white coat paint, designed to provide a smooth, glossy finish with excellent leveling and sag resistance. The formulation incorporates various additives to enhance its performance, stability, and application properties. This high gloss top white coat paint is based on Synaqua* 4804 alkyd emulsion and uses Aquaflow™ NLS-220E and Aquaflow™ NMS-450E non-ionic synthetic associative thickeners (NSAT).
Components and Their Functions:
1. Water
  - Function: Vehicle, dissolving and carrying other components.
2. Biocide (Nuosept BIC)*
  - Function: In-can preservative, preventing microbial growth in the paint.
3. Foam Control Agent (Drewplus™ TS-4385)
  - Function: Reduces foam formation during application.
4. Block Co-polymer (Disperbyk 190)*
  - Function: Wetting/dispersing agent, helping to evenly distribute pigments and fillers.
5. Titanium Dioxide (Kronos 2190)*
  - Function: Pigment, providing opacity and whiteness.
6. Water (Let Down)
  - Function: Additional vehicle, diluting and adjusting the formulation.
7. Alkyd Emulsion (Synaqua 4804)*
  - Function: Binder, forming a durable and glossy film upon drying.
8. Non-carboxylate Iron Complex (Borchi OXY-coat 1101)*
  - Function: Dryer, accelerating the drying process.
9. Propane-1,2-diol (Propylene Glycol)
  - Function: Co-solvent, enhancing the solubility of other components.
10. Silicon-based Surfactant (BYK 347)*
  - Function: Substrate wetting, improving adhesion and leveling.
11. Phosphate Ester (Dextrol™ OC-180HS)
  - Function: Surfactant, enhancing the stability and performance of the paint.
12. NSAT (Aquaflow™ NLS-220E)
  - Function: Rheology modifier, adjusting viscosity and flow properties.
13. NSAT (Aquaflow™ NMS-450E)
  - Function: Additional rheology modifier, further fine-tuning viscosity and flow properties.
Properties:
- Total Weight: 1000.0 kg
- Viscosity (Brookfield, 20/4): 2800 mPa·s
- Viscosity (Stormer): 105 KU
- Viscosity (ICI): 315 mPa·s
- Leveling (Leneta): 10 (1-10; 10=Best)
- Brush (Leneta): 9 (1-10; 10=Best)
- Sag Resistance: 200 microns
- Gloss (60°): 99 GU
Preparation Procedure:
1. Initial Mixing:
  - Add water to a mixing container.
  - Incorporate biocide (Nuosept* BIC), foam control agent (Drewplus™ TS-4385), and block co-polymer (Disperbyk* 190), stirring continuously to ensure proper mixing.
  - Gradually add titanium dioxide (Kronos* 2190) and disperse at high speed until the Hegmann gauge shows particles <10 microns.
2. Let Down:
  - Add the second portion of water.
  - Gradually incorporate alkyd emulsion (Synaqua* 4804) and mix thoroughly.
  - Add non-carboxylate iron complex (Borchi* OXY-coat 1101) and propylene glycol, stirring to ensure uniformity.
  - Incorporate silicon-based surfactant (BYK* 347) and phosphate ester (Dextrol™ OC-180HS), mixing well.
  - Gradually add NSAT (Aquaflow™ NLS-220E and NMS-450E) while stirring to achieve the desired rheological properties.

High build exterior masonry coating formula

This formulation is for a high build exterior masonry coating. It is designed to provide durable, weather-resistant protection for masonry surfaces. The formulation includes components to enhance adhesion, durability, viscosity control, and protection against microbial growth. This coating is based on Pliotec* LEB 18 low exudation binder and uses Natrosol™ 250 HR hydroxyethylcellulose (HEC) and Aquaflow™ non-ionic synthetic associative thickeners (NSAT).
Components and Their Functions:
1. Water
  - Function: Vehicle, dissolving and carrying other components.
2. Low Exudation Binder (Pliotec LEB 18)*
  - Function: Binder, providing adhesion and forming a durable film upon drying.
3. HEC (Natrosol™ 250 HR)
  - Function: Rheology modifier, adjusting the viscosity and flow properties.
4. Alkaline (pHLEX™ 400)
  - Function: Neutralizing agent, ensuring the pH is in the desired range.
5. Sodium Polyacrylate (BYK 154)*
  - Function: Dispersing agent, aiding in the even distribution of pigments and fillers.
6. Polymers and Hydrophobic Solids (BYK 012)*
  - Function: Foam control agent, reducing foam formation during application.
7. Titanium Dioxide (Tiona 595)*
  - Function: Pigment, providing opacity and whiteness.
8. Filler and Pigment (Durcal 5)*
  - Function: Extender, improving the mechanical properties and reducing the cost.
9. Extender (Calibrite SL)*
  - Function: Extender, improving the mechanical properties and reducing the cost.
10. Talcum Extender (Luzenac 20 Mo)*
  - Function: Extender, improving the mechanical properties and reducing the cost.
11. NSAT (Aquaflow™ XLS-525E)
  - Function: Rheology modifier, adjusting the viscosity and flow properties.
12. NSAT (Aquaflow™ NHS-300E)
  - Function: Additional rheology modifier, further fine-tuning viscosity and flow properties.
13. Algaecide/Fungicide (Acticide MKB 5)*
  - Function: Dry film preservative, preventing microbial growth on the applied coating.
Properties:
- Total Weight: 100%
- Viscosity (ICI C&P): 400 mPa·s
- Gloss (85°): 1.0%
- Pigment Volume Concentration (PVC): 50%
Preparation Procedure:
1. Initial Mixing:
  - Add water to a mixing container.
  - Gradually add low exudation binder (Pliotec* LEB 18), stirring continuously to ensure proper mixing.
  - Incorporate HEC (Natrosol™ 250 HR), alkaline (pHLEX™ 400), sodium polyacrylate (BYK* 154), and polymers and hydrophobic solids (BYK* 012), stirring to achieve a uniform consistency.
  - Add titanium dioxide (Tiona* 595), filler and pigment (Durcal* 5), extender (Calibrite* SL), and talcum extender (Luzenac* 20 Mo). Disperse at high speed (20 ms-1) for 15 minutes until a homogeneous mixture is achieved.
2. Let Down:
  - Gradually add the second portion of low exudation binder (Pliotec* LEB 18), NSAT (Aquaflow™ XLS-525E and NHS-300E), and polymers and hydrophobic solids (BYK* 012), mixing thoroughly.
  - Add algaecide/fungicide (Acticide* MKB 5) and water, stirring until a uniform mixture is obtained.

White soft touch topcoat - formula

This formulation is for a white soft-touch topcoat suitable for application by brush or roller. It includes various components to ensure smooth application, durability, and a soft-touch finish. The formulation is based on Neocryl* XK-98 acrylic co-polymer emulsion and Deuteron* SO-302 elastomer co-polymer, using non-ionic synthetic associative thickeners (NSAT) for rheology control.
Components and Their Functions:
1. Water
  - Function: Vehicle, dissolving and carrying other components.
2. Ammonium Polyacrylate (Dispex CX 4240)*
  - Function: Dispersing agent, aiding in the even distribution of pigments and fillers.
3. Emulsion of Polysiloxanes (Drew 210-886)*
  - Function: Foam control agent, reducing foam formation during application.
4. Biocide (Nuosept BM11)*
  - Function: In-can preservative, preventing microbial growth and extending shelf life.
5. Propylene Glycol
  - Function: Coalescing agent, aiding in the film formation process by promoting the merging of polymer particles.
6. Alkaline (pHLEX™ 400)
  - Function: pH adjuster, ensuring the pH is in the desired range.
7. Titanium Dioxide (KRONOS 2190)*
  - Function: Pigment, providing opacity and whiteness.
8. Acrylic Co-polymer Emulsion (Neocryl XK-98)*
  - Function: Binder, providing adhesion and forming a durable film upon drying.
9. Elastomer-Copolymerisat in Water (Deuteron SO 302)*
  - Function: Soft-feel additive, giving the coating a soft touch finish.
10. Glycol Ether (Dowanol DPnB)*
  - Function: Coalescing agent, enhancing film formation.
11. NSAT (Aquaflow™ NLS-220E)
  - Function: Rheology modifier, adjusting the viscosity and flow properties.
12. NSAT (Aquaflow™ NHS-350E)
  - Function: Additional rheology modifier, further fine-tuning viscosity and flow properties.
Properties:
- Total Weight: 100%
- Viscosities:
  - Brookfield (Spl6/100RPM): 4460 mPa·s
  - Krebs Stormer: 120 KU
  - Cone & Plate: 270 mPa·s
- Specific Mass: 1.18 Kg/m³
- Gloss (60°): 9 GU
- Leveling:
  - Leneta: 10 (1-10; 10=Best)
  - NYPC: 6 (1-10; 10=Best)
- Sag Resistance: 200 microns
- pH: 8 – 9
Preparation Procedure:
1. Initial Mixing:
  - Add water to a mixing container.
  - Gradually add ammonium polyacrylate and biocide, stirring to ensure proper dispersion.
  - Incorporate the emulsion of polysiloxanes and titanium dioxide, dispersing at high speed until fineness < 10 µm is achieved.
2. Let Down:
  - Gradually add acrylic co-polymer emulsion (Neocryl* XK-98) and elastomer co-polymer (Deuteron* SO 302), mixing to achieve a uniform consistency.
  - Incorporate additional emulsion of polysiloxanes, glycol ether (Dowanol* DPnB), and propylene glycol.
  - Add rheology modifiers (Aquaflow™ NLS-220E and NHS-350E) and water, stirring until homogeneous.

White acrylic topcoat for airmix spray - formula

This formulation is designed for a white acrylic topcoat suitable for application using an airmix spray. It includes various components to ensure proper pigment dispersion, film preservation, foam control, and appropriate rheology for a smooth application.
Components and Their Functions:
1. Water
  - Function: Vehicle, dissolving and carrying other components.
2. Sodium Polyacrylate (Dispex CX 4240)*
  - Function: Dispersing agent, aiding in the even distribution of pigments and fillers.
3. Biocide (Nuosept BM11)*
  - Function: In-can preservative, preventing microbial growth and extending shelf life.
4. Blend of Silicone and Surfactants (Drewplus™ S-4374)
  - Function: Foam control agent, reducing foam formation during application.
5. Titanium Dioxide (Kronos 2190)*
  - Function: Pigment, providing opacity and whiteness.
6. Calcium Carbonate (Omyacarb 2GU)*
  - Function: Extender, improving the mechanical properties and reducing cost.
7. Ester Alcohol (Texanol)*
  - Function: Coalescing agent, aiding in the film formation process by promoting the merging of polymer particles.
8. Self-Cross-Linking Acrylic Copolymer (Neocryl XK-237)*
  - Function: Binder, providing adhesion and forming a durable film upon drying.
9. 2-(2-Butoxyethoxy)ethanol (Butyldiglycol)
  - Function: Coalescing agent, enhancing film formation.
10. Biocide (Fungitrol L30 DPG)*
  - Function: Dry film preservative, preventing fungal growth on the dried film.
11. Blend of Silicone & Paraffinic Oils (DrewPlus™ S-4480)
  - Function: Foam control agent, further reducing foam during application.
12. Nonionic Synthetic Associative Thickener (NSAT) (Aquaflow™ XLS-525E)
  - Function: Rheology modifier, adjusting the viscosity and flow properties.
13. Nonionic Synthetic Associative Thickener (NSAT) (Aquaflow™ XLS-550)
  - Function: Additional rheology modifier, further fine-tuning viscosity and flow properties.
14. Alkaline (pHLEX™ 400)
  - Function: Neutralizing agent, adjusting the pH to the desired level.
15. Water
  - Function: Additional vehicle, ensuring the right consistency and viscosity.
Properties:
- Total Weight: 100%
- Viscosities:
  - Brookfield (5/100): 2245 mPa·s
- Pigment Volume Concentration (PVC): 21%
- Solid Content:
  - By Mass: 47%
  - By Volume: 35%
- Density: 1.21 g/cm³
- Gloss (60°): 25 GU
- Leveling (Leneta): 9 (1-10; 10=Best)
- Sag Resistance: 500 microns
Preparation Procedure:
1. Initial Mixing:
  - Add water to a mixing container.
  - Gradually add sodium polyacrylate and biocide, stirring to ensure proper dispersion.
  - Incorporate the blend of silicone and surfactants, titanium dioxide, and calcium carbonate, dispersing at high speed until Hegmann < 10 µm is achieved.
2. Additives:
  - Add ester alcohol and mix thoroughly.
3. Let Down:
  - Gradually add the self-cross-linking acrylic copolymer (Neocryl* XK-237) and additional water, mixing to achieve a uniform consistency.
  - Incorporate 2-(2-butoxyethoxy)ethanol, biocide (Fungitrol* L30 DPG), blend of silicone & paraffinic oils, and rheology modifiers (Aquaflow™ XLS-525E and XLS-550).
  - Adjust pH with alkaline (pHLEX™ 400) and add the remaining water, stirring until homogeneous.
This formulation is optimized to provide a white acrylic topcoat with excellent opacity, durability, and smooth application properties suitable for airmix spray application.

Transparent soft touch topcoat - formula

This formulation is designed for a transparent soft touch topcoat, providing a smooth and tactile finish. It includes a mix of acrylic copolymer emulsion, elastomer-copolymer, various additives, and rheology modifiers to enhance performance and application properties.
Components and Their Functions:
1. Acrylic Co-polymer Emulsion (Neocryl XK-98)*
  - Function: Acts as the primary binder, providing adhesion and forming a durable film upon drying.
2. Water
  - Function: Serves as the vehicle, dissolving and carrying other components.
3. Elastomer-Copolymer in Water (Deuteron SO 302)*
  - Function: Soft-feel additive, enhancing the tactile properties of the topcoat.
4. Emulsion of Polysiloxanes (Drewplus S-4386)*
  - Function: Foam control agent, reducing foam formation during application.
5. Blend of UV-Absorber + HALS (Eversorb AQ-1)
  - Function: Light stabilizing additive, protecting the coating from UV degradation.
6. Biocide (Nuosept BM11)*
  - Function: In-can preservative, preventing microbial growth and extending shelf life.
7. Ester Alcohol (Texanol)*
  - Function: Coalescing agent, aiding in the film formation process by promoting the merging of polymer particles.
8. Polyether-Modified Polysiloxane (BYK 346)
  - Function: Substrate wetting, enhancing the coating's spreadability and adhesion.
9. Nonionic Synthetic Associative Thickener (NSAT) (Aquaflow™ NLS-220E)
  - Function: Rheology modifier, adjusting the viscosity and flow properties for better application.
10. Nonionic Synthetic Associative Thickener (NSAT) (Aquaflow™ NHS-350E)
  - Function: Additional rheology modifier, further fine-tuning viscosity and flow properties.
11. Water
  - Function: Additional vehicle, ensuring the right consistency and viscosity.
Properties:
- Total Weight: 100 kg
- Viscosities:
  - Brookfield (Spl6/100RPM): 21,800 mPa·s
  - Stormer: 99 KU
  - Cone and Plate: 210 mPa·s
- Leveling:
  - Leneta: 10 (1-10; 10=Best)
  - NYPC: 6 (1-10; 10=Best)
- Sag Resistance: 150 microns
- Specific Mass: 1.03 kg/m³
- Gloss (60°): 6 GU
- pH: 8 – 9
Preparation Procedure:
1. Initial Mixing:
  - Add water to a mixing container.
  - Gradually add the acrylic co-polymer emulsion and stir to ensure proper dispersion.
2. Additives:
  - Incorporate the elastomer-copolymer, foam control agent, light stabilizing additive, and biocide in sequence, ensuring each is well-mixed before adding the next.
3. Final Additions:
  - Add the ester alcohol and polyether-modified polysiloxane, followed by the rheology modifiers (NSAT Aquaflow™ NLS-220E and NHS-350E).
  - Add the remaining water and stir until a homogeneous mixture is achieved.
Legal and Trademark Information:
- This formulation and the trademarks mentioned are the property of Ashland or its subsidiaries, with some trademarks owned by third parties.
- The document includes a disclaimer about the accuracy and reliability of the information, stating that it should not be taken as a guarantee or warranty.
- The information is copyrighted by Ashland, with the latest revision in October 2019.
This formulation is optimized to provide a transparent, soft touch topcoat with excellent tactile properties, UV protection, and a smooth application suitable for brush or roller use.

Top protection coat Based on Aquaflow™ NLS 200 rheology modifier

This formulation is designed for a top protection coat, providing a durable and protective finish. It includes a mix of water, acrylic binder, coalescing agents, biocide, and rheology modifier to enhance performance and application properties.
Components and Their Functions:
1. Water
  - Function: Serves as the primary vehicle, dissolving and carrying other components.
2. Acrylic Binder (Primal HG 74D)*
  - Function: Acts as the main binder, providing adhesion, flexibility, and forming a durable film upon drying.
3. 2-Butoxyethanol (Butyl Glycol)
  - Function: Serves as a coalescing agent, aiding in the film formation process by promoting the merging of polymer particles.
4. Ester Alcohol (Texanol)*
  - Function: Functions as an additional coalescing agent, enhancing the film formation and durability.
5. Biocide (Nuosept BIC)*
  - Function: Acts as an in-can preservative, preventing microbial growth and extending shelf life.
6. Nonionic Synthetic Associative Thickener (NSAT) (Aquaflow™ NLS-200)
  - Function: Acts as a rheology modifier, adjusting the viscosity and flow properties of the top coat for better application.
Properties:
- Total Weight: 1000 kg
Preparation Procedure:
- Add water to a container.
- Gradually mix in the acrylic binder under stirring to ensure proper dispersion.
- Add the coalescing agents (2-butoxyethanol and ester alcohol) and continue stirring.
- Incorporate the biocide to prevent microbial contamination.
- Finally, add the rheology modifier and stir the mixture until a homogeneous film-forming solution is achieved.
Legal and Trademark Information:
- This formulation and the trademarks mentioned are the property of Ashland or its subsidiaries, with some trademarks owned by third parties.
- The document includes a disclaimer about the accuracy and reliability of the information, stating that it should not be taken as a guarantee or warranty.
- The information is copyrighted by Ashland, with revisions noted from 2013 and 2015, and the latest revision in November 2015.
This formulation is optimized to provide a protective top coat with excellent film-forming properties, ensuring durability and a high-quality finish. It is suitable for a variety of applications where a strong, protective coating is needed.

Parquet lacquer formula for brush and roller application

This formulation is designed for a parquet lacquer intended for brush and roller application. It features a combination of polyurethane dispersion and various additives to enhance performance, application properties, and durability. This formulation is optimized to provide a durable, high-quality finish for parquet flooring, suitable for application with both brush and roller. It ensures smooth application, excellent wetting properties, and a matte finish.
Components and Their Functions:
1. Aliphatic Polyurethane Dispersion (LUR 10VP)*
  - Function: Acts as the binder, providing adhesion, flexibility, and forming a durable film upon drying.
2. Emulsion of Polysiloxanes (Drewplus™ TS-4385)
  - Function: Serves as a foam control agent, reducing foam during application to ensure a smooth finish.
3. Polyether-modified Polysiloxanes (BYK 349)*
  - Function: Improves substrate wetting, ensuring even application and adherence to the surface.
4. Biocide (Nuosept BM11)*
  - Function: Functions as an in-can preservative, preventing microbial growth and extending shelf life.
5. Dipropylene Glycol Methyl Ether (Dowanol DPM)*
  - Function: Acts as a coalescing agent, aiding in the film formation process by promoting the merging of polymer particles.
6. Thermosetting Plastic Powder (Deuteron MK)*
  - Function: Serves as a matting agent, reducing the gloss level to achieve a desired matte finish.
7. Non-ionic Synthetic Associative Thickener (NSAT) (Aquaflow™ NHS-300E)
  - Function: Acts as a rheology modifier, adjusting the viscosity and flow properties of the lacquer for better application.
8. Water
  - Function: Used as a vehicle to dissolve and carry other components.
Properties:
- Viscosity (DIN4, at 25°C): 21 seconds
- Pigment Volume Concentration (PVC): 2.6%
- Solids by Mass: 30%
- Specific Gravity: 1.01 g/cm³
- Solids by Volume: 29%
- Total Weight: 1000 kg
Preparation Procedure:
- Mix the aliphatic polyurethane dispersion with the foam control agent, substrate wetting agent, and biocide.
- Add the coalescing agent and matting agent to the mixture.
- Incorporate the rheology modifier and water to achieve the desired viscosity and consistency.
- Ensure thorough dispersion and mixing to achieve a uniform formulation.

Archives: Listings

Acrylic high gloss white top coat

Components and Their Functions:

Viscosity Properties:

High gloss white top coat formula

Components and Their Functions:

Viscosity Properties:

High Gloss White Top Coat - Higher Solids

Components and Their Functions:

Viscosity Properties:

High gloss white coat paint formula

Components and Their Functions:

Properties:

Preparation Procedure:

High build exterior masonry coating formula

Components and Their Functions:

Properties:

Preparation Procedure:

White soft touch topcoat - formula

Components and Their Functions:

Properties:

Preparation Procedure:

White acrylic topcoat for airmix spray - formula

Components and Their Functions:

Properties:

Preparation Procedure:

Transparent soft touch topcoat - formula

Components and Their Functions:

Properties:

Preparation Procedure:

Legal and Trademark Information:

Top protection coat Based on Aquaflow™ NLS 200 rheology modifier

Components and Their Functions:

Properties:

Preparation Procedure:

Legal and Trademark Information:

Parquet lacquer formula for brush and roller application

Components and Their Functions:

Properties:

Preparation Procedure: