Archives: Listings

Dynasylan DAMO

Dynasylan DAMO, also known by its chemical name N-2-Aminoethyl-3-aminopropyltrimethoxysilane, is a specialized silane compound primarily used as an adhesion promoter and surface modifier. Here are some key details about Dynasylan DAMO:
Chemical Properties:
- Chemical Structure: It is a diamino-functional silane, featuring both amine and alkoxysilane groups in its molecular structure.
Physical Properties:
- Appearance: Colorless to slightly yellowish liquid.
- Odor: Amine-like odor.
- Solubility: Soluble in alcohols and aliphatic as well as aromatic hydrocarbons.
- Density: Approximately 1.03 g/cm³ at 20 °C (DIN 51757).
- Refractive Index: Approximately 1.447 at 20 °C (DIN 51423).
- Viscosity: Approximately 6 mPa.s at 20 °C (DIN 53015).
- Boiling Point: Approximately 140 °C at 20 hPa (DIN 51356).
- Flash Point: Approximately 136 °C (DIN 51758).
Applications:
- Adhesion Promoter: Enhances bonding between inorganic materials (such as glass, metals, and fillers) and organic polymers (including thermosets, thermoplastics, and elastomers).
- Surface Modifier: Modifies the surface characteristics to improve compatibility and performance in composite materials.
Registrations:
Dynasylan DAMO is registered under various regulatory frameworks including:
- EINECS/ELINCS (EU)
- AICS (Australia)
- DSL/NDSL (Canada)
- PICCS (Philippines)
- TSCA (USA)
- IECSC (P.R. China)
- ENCS (Japan)
- ECL (South Korea)
- REACH (Europe)
Safety and Handling:
- It is essential to consult the Safety Data Sheet (SDS) for comprehensive safety, toxicological data, and guidelines on transportation, storage, and usage.
- SDS can be obtained from Evonik's website or through local representatives.

Irganox 245

Irganox 245 is a chemical substance primarily used as a stabilizer.
1. Chemical Identity: Irganox 245 is formally identified as ethylene bis(oxyethylene)bis[3-(5-tert-butyl-4-hydroxy-m-tolyl)propionate]. Its CAS number is 36443-68-2.
2. Recommended Use: It is used as a stabilizer in various applications.
3. Hazards Identification:
  - Aquatic Chronic Toxicity: Irganox 245 is classified as hazardous to the aquatic environment with long-lasting effects (Category 1).
  - Combustible Dust: It may form a combustible dust concentration in air.
4. Health Hazards:
  - Ingestion: Low acute toxicity (LD50 > 7,000 mg/kg in rats).
  - Inhalation: Not determined.
  - Skin and Eye Contact: Non-irritating to skin and eyes based on animal studies.
  - Chronic Toxicity: May cause liver damage after repeated ingestion of high doses in animal studies.
5. Fire and Explosion Hazards:
  - Flash Point: > 150 °C (closed cup).
  - Flammability: May form a flammable dust-air mixture.
  - Dust Explosion Class: Class 2 (Kst-value 200 up to 300 bar m s-1).
6. Ecological Hazards:
  - Aquatic Toxicity: Toxic to aquatic life with long-lasting effects. Specific toxicity to fish and aquatic invertebrates has been measured.
7. Handling and Storage:
  - Handling: Avoid dust formation and eliminate sources of ignition. Use protective equipment to minimize exposure.
  - Storage: Keep containers tightly closed in a cool, well-ventilated place.
8. Regulatory Information:
  - Registered under TSCA in the US.
  - Classified as environmentally hazardous substance for transportation (UN 3077).
9. Disposal Considerations: Dispose of in accordance with local regulations. Avoid discharge into drains or the environment.

Aerosil R 8200

AEROSIL® R 8200 is a specialty filler manufactured by Evonik Operations GmbH, specifically a structure-modified, highly hydrophobic fumed silica. Here are the details based on the provided information:
Description
- Type: Highly hydrophobic fumed silica
- Structure: Structure-modified to enhance specific properties
- Function: Acts as an anti-caking and free-flow agent for powders
- Benefit: Allows for high loading levels at low viscosities due to its low thickening efficiency
Key Benefits
- Anti-caking and Free-Flow Agent: Prevents powder clumping and facilitates better flow properties.
- High Loadings: Can be used at high concentrations while maintaining low viscosity.
- Low Rheological Effect: Minimally impacts the viscosity of formulations.
Suitability
- Solventborne Systems: Suitable for 100% solventborne systems
- Resins Compatibility: Suitable for polyester resins and epoxy resins; partly suitable for other systems (details not specified)
Typical Applications
- Powder Coatings: Used to enhance properties such as scratch resistance and corrosion resistance.
Technical Data
- Appearance: White solid
- Carbon Content: 2.0 - 4.0%
- Loss on Drying: Less than 0.5%
- pH-Value: Greater than 5
- Specific Surface Area (BET): 135 - 185 m²/g
- Tamped Density: Approximately 140 g/l
Recommended Addition Level
- As Supplied: 0.05 - 0.5 wt-% of total formulation
Processing Instructions
- Can be added as supplied or as a predilution.
Handling & Storage
- Shelf Life: 24 months from the date of manufacture when stored in original unopened packaging.
- Storage Conditions: Store in closed containers under dry conditions, protecting from volatile substances.

Kaneka Silyl SAX750

Kaneka Silyl SAX750 is a product known as Silyl Terminated Polyether, primarily used for industrial applications. Here's a breakdown based on the provided Safety Data Sheet (SDS):
Product Information
- Product Identifier: Kaneka Silyl SAX750
- Product Code: RM00007
- Synonyms: Silyl Terminated Polyether
- Supplier: Kaneka North America LLC, Pasadena, TX
- Emergency Telephone Number: Chemtrec 1-800-424-9300
Physical and Chemical Properties
- Physical State: Viscous liquid
- Appearance: Light yellow, odorless
- Density: 0.98-1.02 g/cm³
- Dynamic Viscosity: 30.0-62.0 Pa.s
- Flash Point: 204°C (399.2°F) Cleveland Open Cup
- Solubility: Insoluble in water
Composition
- Main Component: Silyl Terminated Polyether (>99%)
- Minor Component: Trade Secret Organic (<0.1%)
Health and Safety Information
- Hazard Classification: Not classified as hazardous according to OSHA Hazard Communication Standard (29 CFR 1910.1200).
- First Aid Measures: Includes rinsing eyes and skin with water, seeking medical attention for ingestion or inhalation.
- Fire-Fighting Measures: Uses dry chemical, CO2, water spray, or regular foam as extinguishing media; wear self-contained breathing apparatus.
Handling and Storage
- Handling: Use in accordance with good industrial hygiene and safety practices.
- Storage: Keep in a cool, well-ventilated place, protected from sunlight and strong oxidizing agents.
Environmental Impact
- Ecotoxicity: Release to the environment may harm plants and animals; not readily biodegradable.
Regulatory Information
- Regulatory Compliance: Listed on TSCA, DSL/NDSL, EINECS/ELINCS, REACH compliant, and other international inventories.
Other Information
- Disposal: Dispose of according to local regulations; do not release into the environment.
- Transportation: Not regulated under DOT, TDG, ICAO, IATA, IMDG, RID, ADR, ADN, or MEX classifications.
Disclaimer
The SDS provides comprehensive safety and handling information but notes that it is not a warranty and should be followed for safe handling, use, and disposal practices.
Usage: Kaneka Silyl SAX750 is specifically designed for industrial applications, likely in adhesives, sealants, coatings, and other formulations requiring its unique properties as a silyl terminated polyether. It offers stability under normal conditions and specific handling precautions to ensure safe usage in various industrial settings.

SILLITIN Z 86 PURISS

SILLITIN Z 86 (PURISS) is a specialized functional filler primarily used in paint and varnish applications, characterized by its unique combination of corpuscular silica and lamellar kaolinite. Here's a detailed overview based on the technical datasheet:
Description
- Composition: Natural combination of corpuscular silica and lamellar kaolinite.
- Appearance: Free-flowing powder
- Color: CIELAB scale: L* 94.0, b* 9.5
- Residue > 40 µm: 20 mg/kg
- Volatile Matter at 105 °C: 0.5%
- Density: 2.6 g/cm³
- Particle Size Distribution:
  - D50: 1.9 µm
  - D97: 9.0 µm
- Surface Area BET: 12 m²/g
- Oil Absorption: 55 g/100 g
- Electrical Conductivity: 80 µS/cm
- Refractive Index (n): 1.55
Puriss Grade
- Additional Characteristics:
  - Very low residue > 40 µm (8 mg/kg)
  - Improved dispersion behavior
Applications
- Fields of Application:
  - Emulsion and silicate paints (both exterior and interior)
  - Industrial paints
  - Wood and foil coatings
  - Anti-corrosion coatings
  - Primers and fillers for the automobile industry
  - Sealing and embedding compounds
  - Electrophoretic paints
Benefits
- Functional Benefits:
  - High filling ratio
  - Outstanding dispersion behavior
  - Good pigment dispersion (spacer effect)
  - Low abrasiveness
  - Very low tendency to settle
  - Soft sediment
  - Good wet edge strength
  - Quick drying
  - Weathering resistance
  - Breathability
  - Scratch resistance
  - High abrasion resistance
  - Good transparency with a slight yellow tinge
  - Slight flatting effect
  - Complies with standards for basic foodstuffs (BfR and FDA)
Comparative Properties
- Comparison with Other Grades:
  - Viscosity: ●●
  - Yield Point: ●●
  - Sedimentation: ●●●●
  - Flatting: ●●●●
Particle Size Distribution and Rheology
- Measurement: Based on Fraunhofer diffraction spectrum using Mastersizer 3000.
- Sedimentation and Rheology: Demonstrates thixotropic properties suitable for various applications.
Additional Information
- Storage: Unlimited shelf life under proper dry conditions.
- Safety and Regulatory: Produced under rigorous manufacturing processes to meet quality and safety standards.
SILLITIN Z 86 (PURISS) is designed to enhance the performance and durability of coatings while meeting stringent requirements for dispersion, sedimentation, and rheology in various industrial applications.

Jayflex DIUP

Jayflex™ DIUP Plasticizer is a high-molecular-weight plasticizer manufactured by ExxonMobil, designed primarily for use with flexible PVC products. Here are the key characteristics and properties of Jayflex™ DIUP as detailed in the technical datasheet:
Chemical Composition and Specifications
- Chemical Composition: Di iso undecyl phthalate
- CAS Number: 85507-79-5
- Ester Value: > 99.7% by weight (Test Method: RPP 201)
- Molecular Weight: 474.7 g/mol
- Refractive Index: 1.484 - 1.487 at 20°C (ASTM D1218)
- Acid Value: < 0.07 mg KOH/g (ASTM D1045)
- Color, APHA: < 30 (ASTM D5386)
- Density: 0.959 - 0.963 g/cm3 at 20°C (ASTM D4052)
- Viscosity: 135 - 165 mPa-s at 20°C (ASTM D445)
- Water Content: < 0.05% by weight (ISO 12937)
Product Features and Benefits
- Performance: Designed to offer good performance at high temperatures and excellent outdoor weathering capabilities.
- Compatibility: Compatible with flexible PVC formulations requiring minimal contribution to fogging.
- Permanency: Higher molecular weight compared to DIDP (Diisodecyl phthalate) and DINP (Diisononyl phthalate), contributing to increased permanency of the end products.
- Density: Lower density compared to DIDP and DINP, enabling higher output volumes at the same weight.
- Flexibility: Provides sustained flexibility even in cold conditions.
- Volatility and Migration: Exhibits low volatility, resistance to heat-aging conditions, slower migration, and increased extraction resistance compared to Jayflex™ DIDP plasticizer.
- Safety: Not classified as carcinogenic, mutagenic, or toxic. It is also REACH compliant.
Applications
- Primary Applications:
  - PVC products, particularly flexible PVC applications.
  - Automotive and transportation sectors, including internal components such as airbags and covers.
  - Mechanical and physical performance enhancements, focusing on flexibility.
  - Visual aspects and aesthetics, specifically anti-fogging properties.
Geographical Availability
- Central and Eastern Europe, Western Europe, Africa, Middle East, and Central Asia.
Jayflex™ DIUP plasticizer is engineered to meet stringent performance requirements in various industries while ensuring compliance with regulatory standards and enhancing the durability and flexibility of PVC products.

AKTISIL PF 777

AKTISIL PF 777 is a specialized functional filler primarily used in the paint and varnish industry. Here are the key details about AKTISIL PF 777 based on the provided technical data sheet:
Description
Composition: AKTISIL PF 777 is an activated form of SILLITIN Z 86, achieved by modifying the surface with an alkyl functional group. This modification enhances the hydrophobic properties of the filler.
Appearance: Free-flowing powder
Color: Light colored (CIELAB scale: L* 93.8, b* 10.0)
Density: 2.6 g/cm³
Particle Size Distribution: D50 = 2.0 µm, D97 = 10.0 µm
Oil Absorption: 35 g/100 g
Water Absorption (Baumann): 0.01%
Volatile Matter at 105°C: 0.3%
Shelf Life: 3 years if stored properly under dry conditions
Applications
Primary Use: AKTISIL PF 777 is utilized as a functional filler in paints and coatings.
Specific Applications:
Industrial coatings requiring high performance
Sealants and casting compounds, including one-component PU systems
Anti-corrosion coatings
High solid fillers and primers
Thickening and rheology control of epoxide resins, PU systems, and plastisols
Benefits
Enhanced Properties:
Hydrophobic nature
Improved wetting and easy dispersion in binders with low to slight polarity
Provides rheological activity and stability
Improves adhesion on non-blasted steel surfaces
Enhances anti-corrosive properties, particularly resistance to acids
Exhibits good weathering resistance, breathability, and scratch resistance
Low tendency to settle, with soft sediment and good edge covering
Usage Guidelines
Minimum Film Thickness: > 10 µm, with special cases even lower
Dosage: Up to 50% (m/m) depending on the target application, with PVC up to approximately 30%

Vulkacit MOZ/LG

Vulkacit MOZ/LG is a chemical compound produced and sold by LANXESS primarily as a vulcanization accelerator in the manufacturing of tires and other rubber products. Here are the key details about Vulkacit MOZ/LG based on the provided Product Safety Assessment:
Identification
- Product Name: Vulkacit MOZ/LG
- Chemical Name: 2-(Morpholinothio)benzothiazole
- Synonyms: 2-Benzothiazolesulfenemorpholide, 2-Benzothiazolyl n-Morpholine Sulfide, MBS, OBTS
- CAS Number: 102-77-2
- Appearance: Yellow solid in granule form with a slight amine odor
Uses
- Primary Use: Vulcanization accelerator in the production of tires and other rubber products.
Properties
- Melting Point: >158°F (70°C)
- Flash Point: 370°F (187.78°C)
- Solubility in Water: Low
Potential Human Health Effects
- Occupational Exposure: Potential exposure during handling, mixing, and processing. Measures include training, protective gear (respirators, goggles, gloves), and proper ventilation.
- Short-Term Effects: Skin and eye irritation upon contact. Allergic reactions and temporary skin sensitization possible.
- Long-Term Effects: Prolonged contact may lead to skin sensitization.
- Ingestion: Not expected to be harmful if swallowed.
Physical Hazards
- Stability: Stable and non-volatile at room temperature.
- Explosive Properties: Large concentrations of dust may be explosive. Avoid heat, flames, and oxidizing agents.
Environmental Impact
- Biodegradability: Not biodegradable but breaks down to biodegradable substances with prolonged exposure to water and/or light.
- Toxicity to Aquatic Life: Moderate toxicity to fish and invertebrates; slight toxicity to aquatic plants before degradation.

Rhenogran CBS-80

Rhenogran CBS-80 is a predispersed rubber chemical additive primarily used as an accelerator in the vulcanization process of natural and synthetic rubbers. Here are the details:
Function:
- Product Description: Predispersed rubber chemical and additive.
- Accelerator Type: N-cyclohexyl-2-benzothiazyl sulphenamide (CBS).
Composition:
- Active Ingredient: 80% N-cyclohexyl-2-benzothiazyl sulphenamide.
- Binder and Dispersing Agents: 20% elastomer binder and dispersing agents.
- Appearance: Blue granules (color intensity may vary).
- Density at 20°C: Approximately 1.19 g/cm³.
- Physiological Properties: Refer to the safety data sheet for detailed information.
Use:
- Mode of Action: Rhenogran CBS-80 provides a long scorch time, ensuring processing safety, while also promoting fast full cure during vulcanization.
- Applications: Used as a sole accelerator in low sulfur vulcanization processes or in combination with dithiocarbamate or thiuram accelerators.
- Benefits: Vulcanizates exhibit good aging resistance and compression set properties.
- Scorch Time: Combining Rhenogran CBS-80 with thiuram and dithiocarbamate accelerators reduces scorch time significantly. Thiourea can further accelerate CBS-80, especially in low sulfur mixes.
- Processing: The thermoplastic polymer binder and dispersing agents ensure quick absorption and excellent dispersion within the rubber polymer, optimizing the effectiveness of the active ingredient.
Dosage:
- NR (Natural Rubber):
  - Primary use: 0.5 to 1.0 phr (parts per hundred rubber) with 2.5-3.5 phr sulfur.
  - Secondary use: 0.5 phr with 1.5-3.0 phr sulfur and 0.3 phr mercapto or thiuram accelerators.
- SBR (Styrene Butadiene Rubber):
  - 1.0 to 1.4 phr with 1.5-2.5 phr sulfur and 0-0.2 phr thiuram accelerator.
Application:
- Common Uses: Treads for tires, air hoses, conveyor belts, footwear, and various technical rubber articles requiring efficient vulcanization with good processing safety and final product properties.
Rhenogran CBS-80 is designed to enhance the vulcanization process of rubber, offering flexibility in formulation and ensuring consistent performance in a range of applications.

Struktol WB 16

STRUKTOL® WB 16 is a lubricant and process additive manufactured by Struktol Company of America, designed for use in rubber compounds. Here are the details:
Composition:
- Primary Components: Mixture of fatty acid soaps, predominantly calcium-based.
Typical Properties:
- Appearance: Light-colored pastilles or powder.
- Dropping Point: 96 - 108°C.
- Specific Gravity: 0.98.
- Physiological Behavior: Refer to the safety data sheet for detailed information.
- Storage Stability: At least 2 years under normal storage conditions.
- Packaging: 25 kg PE bags.
Recommendations for Application:
- Function: Improves flow properties of rubber compounds by reducing viscosity and internal friction.
- Benefits:
  - Enhances mold release, especially effective for complex mold designs.
  - Prevents sticking to rotors in internal mixers and on open mills.
  - Improves calender roll release.
  - Slightly accelerates the cure rate of sulfur-containing compounds.
- Application: Can be added at any stage of the mixing cycle, including during warm-up prior to calendering. Optimal effectiveness is achieved when added during the final mixing stage.
- Dosage: Typically used at 0.5 to 3% of the total batch weight.
Additional Notes:
- Usage Scope: Suitable for various rubber processing applications where improved flow, reduced friction, and enhanced release properties are required.
- Disclaimer: The information provided is believed to be reliable, but users are advised to refer to the safety data sheet and conduct their own tests to ensure suitability for specific applications.
STRUKTOL® WB 16 is a specialized additive aimed at improving processing efficiency and product quality in rubber manufacturing processes.