Archives: Listings

AQUACER 494

AQUACER 494 is an aqueous paraffin wax emulsion primarily designed for care products and polishes. Here are the key details about this product:
Composition: It is an anionic/non-ionogenic, aqueous paraffin wax emulsion.
Typical Properties:
- Non-volatile matter: 55%
- Carrier: Water
- Melting point: 65°C (wax content)
- pH value: 9
Storage and Transportation: AQUACER 494 should be stored and transported between 5°C and 35°C. It's recommended to mix well before use due to its temperature sensitivity.
Applications: It is specifically designed for care products and polishes.
Special Features and Benefits:
- Increases gloss and promotes buffability.
- Provides protection against abrasion and stains after polishing.
- Improves weather resistance.
- Due to its melting point of 65°C, it can be easily polished using a soft cloth without machine assistance.
Recommended Use: Used to care for and protect coated surfaces as well as wood and metals.
Recommended Levels: Can be used at levels between 1% and 25% of supplied form.
Incorporation and Processing Instructions:
- The additive can be added at any time while stirring.
- Abrasive materials and pigments are to be added prior to the addition of the paraffin wax emulsion.
- Surfactants must be added at the end of the production process to prevent foaming.
Special Note: It is possible to combine AQUACER 494 with other wax emulsions (such as carnauba, paraffin, and PE waxes) to increase the performance of the maintenance product formulation.
In summary, AQUACER 494 offers gloss enhancement, buffability promotion, protection against abrasion and stains, and improved weather resistance in care products and polishes.

AQUACER 3500

AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax primarily used for formulating release agents for metal die casting. Here are the key details about this product:
Composition: It is a cationic emulsion of a modified polypropylene wax.
Typical Properties:
- Density: 1.00 g/ml (at 20°C)
- Non-volatile matter: 41% (after 1 hour at 125°C)
- Carrier: Water
- Melting point: 160°C (wax content)
- Viscosity: 80 mPa·s
- pH value: 7
Storage and Transportation: AQUACER 3500 should be stored and transported between 5°C and 35°C. It's recommended to mix well before use due to its temperature sensitivity.
Applications: Primarily used as release agents for metal die casting, especially in aluminum die casting applications.
Special Features and Benefits:
- Recommended for formulating aqueous mold release agents used in aluminum die casting.
- Provides good wetting of the mold at high temperatures.
- Exhibits very good film forming and outstanding adhesion to the mold surface.
- Protects the mold from damage and ensures excellent surface quality of the molded components.
- Remains stable in hard water conditions.
Recommended Levels: Typically used at levels between 10% and 70% of the total formulation.
Incorporation and Processing Instructions: AQUACER 3500 is preferably diluted with water but can also be mixed directly with all the components of the aqueous mold release agent.
In summary, AQUACER 3500 is designed to facilitate the release of metal castings from molds, particularly in aluminum die casting processes, by providing excellent film formation, adhesion, and stability in high-temperature environments.

AQUACER 2650

AQUACER 2650 is a wax emulsion based on carnauba wax primarily used in aqueous thermal transfer systems, car care products, and aqueous leather coatings. Here are the key details about this product:
Composition: It is a non-ionic emulsion of carnauba wax.
Typical Properties:
- Non-volatile matter: 30%
- Carrier: Water
- Melting point: 85°C (wax content)
- Viscosity: < 15 mPa·s (at 23°C, D=800/s)
- pH value: 4.5
Storage and Transportation: AQUACER 2650 should be stored and transported between 5°C and 35°C. Mixing well before use is recommended due to its temperature sensitivity.
Applications:
1. Thermal Transfer Ribbons: Improves thermal transfer, printing sharpness, gloss, and rub resistance in aqueous thermal transfer ink ribbons and hot stamping foils.
2. Care Products and Polishes: Seals minor scratches, restores surface color, and enhances polishability for maintaining and protecting various surfaces, including coated and uncoated surfaces as well as plastics.
3. Leather Coatings: Enhances water repellency, anti-blocking, and surface slip while achieving the burnishing effect.
Recommended Levels:
- Thermal Transfer Ribbons: 1-50% additive based on the total formulation.
- Care Products and Polishes: 3-15% additive based on the total formulation.
- Leather Coatings: 3-7% additive based on the total formulation.
Incorporation and Processing Instructions: The additive should preferably be post-added using a low shear rate, and mixing well before use is necessary. For thermal transfer ribbons and leather coatings, surface-active substances must be added at the end of the production process to prevent foaming.
Special Note: AQUACER 2650 can be combined with other wax emulsions (such as beeswax, montan ester, paraffin, and PE wax) to enhance the performance of care product formulations.

AQUACER 2500

AQUACER 2500 is a wax emulsion based on a modified polyethylene wax primarily used to improve paper surfaces. Here are the key details about this product:
Composition: It is a non-ionic emulsion of a modified polyethylene wax.
Typical Properties:
- pH value: 9
- Non-volatile matter: 40% (60 min, 125°C)
- Carrier: Water
- Melting point: 125°C (wax content)
- Viscosity: < 100 mPa·s (at 23°C, D=800/s)
Storage and Transportation: AQUACER 2500 should be stored and transported between 5°C and 35°C. Mixing well before use is recommended due to its temperature sensitivity.
Applications:
- Paper Coatings: It is used to improve the surface uniformity of coated paper substrates, reducing two-sidedness. Additionally, it increases slip and rub resistance, improves printing ink acceptance and ink setoff, and reduces the penetration speed of fountain solution in offset printing.
Recommended Use: AQUACER 2500 can be added to all paper coating colors and is compatible with all coating techniques. It is particularly suitable for use in paper coatings where the base paper contains a large amount of recycled pulp.
Recommended Levels: 1–6% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions: The additive should be added with low shear force before adding thickeners. Stir before use.
Special Note: AQUACER 2500 is recommended for application-related test series to determine the optimum dosage. It is produced by BYK-Chemie GmbH, a company based in Wesel, Germany.

AQUACER 1547

AQUACER 1547 is a wax emulsion based on oxidized high-density polyethylene (HDPE) primarily used to enhance scratch resistance in aqueous can coating systems. Here are the key details about this product:
Composition: It is an anionic emulsion of oxidized HD polyethylene wax.
Typical Properties:
- Non-volatile matter: 35% (60 min., 125°C)
- Carrier: Water
- Melting point: 125°C (wax content)
- Viscosity: 40 mPa·s (at 23°C, D=400/s)
- pH value: 9.7
Storage and Transportation: AQUACER 1547 should be stored and transported between 5°C and 35°C. Mixing well before processing is recommended due to its temperature sensitivity.
Applications: It is specifically recommended for improving scratch resistance in aqueous can coatings.
Recommended Use:
- Recommended Levels: 1-2% additive (as supplied) based upon the total formulation.
- The recommended levels provided are for orientation. Optimal levels should be determined through a series of laboratory tests.
Incorporation and Processing Instructions: The additive should preferably be incorporated at the end of the production process at a low shear rate. Mixing well before use is advised.
This product is produced by BYK-Chemie GmbH, a company based in Wesel, Germany.

AQUACER 1510

AQUACER 1510 is a polypropylene wax emulsion primarily used in two main applications: glass fiber sizings and care products/polishes. Here are the key details about this product:
Composition: It is a non-ionic emulsion of modified polypropylene wax.
Typical Properties:
- pH value: 9
- Non-volatile matter: 40% (60 min, 125 °C)
- Carrier: Water
- Melting point: 160 °C (wax content)
- Viscosity: Approximately 40 mPa·s (at 23 °C, D=800/s)
Storage and Transportation: AQUACER 1510 should be stored and transported between 5 °C and 35 °C and mixed well before use due to its temperature sensitivity.
Applications:
1. Glass Fiber Sizings: It is recommended for use in aqueous glass fiber sizings to enhance the mechanical properties of glass fiber-reinforced polypropylene (PP) compounds, improving tensile strength and the modulus of elasticity.
2. Care Products and Polishes: It is used to improve the surface properties of aqueous care products and polishes, particularly to achieve a strong anti-slip effect and good dirt repellency.
Recommended Use:
- Glass Fiber Sizings: 10–50% additive (as supplied) based on the total formulation.
- Care Products and Polishes: 2.5–7.0% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- For both applications, the additive is preferably incorporated at a low shear rate and mixed well before use.
- In care products and polishes, it is added while stirring after blending the polymers with plasticizers and water, but prior to incorporating surface-active substances.
Special Note: AQUACER 1510 is compatible with all known polymer dispersions and plasticizers and can be combined with other wax emulsions as required.
This product is produced by BYK-Chemie GmbH, a company based in Wesel, Germany.

AQUACER 1075

AQUACER 1075 is an emulsion based on high-density polyethylene wax designed to enhance the surface properties of aqueous care products and polishes, as well as aqueous printing inks. Here are the key details about this product:
Composition:
- APEO-free, non-ionic emulsion of high-density polyethylene wax.
Typical Properties:
- pH value: 9.5
- Non-volatile matter: 35%
- Solvents: Water
- Melting point: 130 °C
- Viscosity: Less than 100 mPa·s at 23 °C
Storage and Transportation:
- Temperature sensitive. Should be stored and transported between 5 °C and 35 °C.
Applications:
1. Care Products and Polishes:
  - Enhances mechanical resistance, increases filling capacity, and provides an anti-slip effect.
  - Compatible with all known polymer dispersions and plasticizers.
  - Recommended for use in self-shine emulsions and polishes.
2. Aqueous Printing Inks:
  - Improves abrasion resistance and reduces the coefficient of friction in printing inks or overprint varnishes.
Recommended Use:
- For care products and polishes: 2–5% additive based on the total formulation.
- For aqueous printing inks: 2–5% additive based on the total formulation.
Incorporation and Processing Instructions:
- For care products and polishes: Add the wax additive with stirring after blending the polymers with the plasticizers and water, but before incorporating surface-active substances.
- For aqueous printing inks: Incorporate the additive using a low shear rate and mix well before use.
In summary, AQUACER 1075 serves as a versatile additive for improving the surface properties of various aqueous products, including care products, polishes, and printing inks, by enhancing mechanical resistance, filling capacity, anti-slip properties, abrasion resistance, and reducing friction coefficients.

AQUACER 1063

Polyethylene primary dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector.
AQUACER 1063 is a polyethylene primary dispersion designed to enhance the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives used in the packaging sector. Comprising anionic and non-ionic emulsifying agents, it exhibits a pH value of 9 and a non-volatile matter content of 40%. This dispersion is primarily used as an anti-blocking additive during the manufacture of hot-melt adhesives to achieve a free-flowing, non-sticky granulate, particularly during underwater pelletizing. It is easily incorporated into the cooling water system and is dust-free. AQUACER 1063 is also utilized in aqueous dispersion adhesives for packaging applications, enhancing adhesion, especially on foil-laminated surfaces with paper or cardboard. It improves adhesion on foils such as oriented polypropylene (OPP) and biaxially oriented PP (BOPP), and to some extent on polyethylene (PE), even at low temperatures. The recommended levels of addition range from 0.5% to 5% in hot-melt adhesives and 10% to 50% in packaging adhesives, with the optimal dosage determined by application-related test series.

AQUACER 1061

Emulsion of an ethylene-acrylic acid copolymer wax designed to enhance the surface characteristics of paper. Here are the key details and applications outlined in the datasheet:
- Composition: It consists of an anionic aqueous emulsion of an ethylene-acrylic acid copolymer wax.
- Typical Properties:
  - Non-volatile matter (60 min., 125°C): 30%
  - Carrier: Water
  - Melting point (polymer content): 110°C
  - pH value: 7.5
- Applications: Primarily used in paper coatings.
- Special Features and Benefits:
  - Increases barrier and film-forming properties of paper coatings.
  - Improves sealing strength and surface wetting of paper coatings.
  - Recommended for paper and cardboard packaging as well as paper composites.
- Recommended Levels: Typically added at 1-3% based on the total formulation of the paper coating.
- Incorporation and Processing Instructions: The additive should preferably be incorporated at a low shear rate before adding thickeners. It's essential to mix well before use.
In summary, AQUACER 1061 offers significant benefits for paper coatings, enhancing barrier properties, film-forming capabilities, sealing strength, and surface wetting, thus improving the overall quality and performance of paper-based products.

AQUACER 1040

AQUACER 1040 is a primary polyethylene dispersion designed specifically for formulating release agents used in metal die casting, particularly for aluminum. Here's a breakdown of its characteristics and applications:
Composition: AQUACER 1040 consists of a modified primary polyethylene dispersion combined with anionic and non-ionic emulsifiers.
Typical Properties:
- Density: 0.99 g/ml at 20°C
- Non-volatile matter: 38% after 1 hour at 125°C
- Carrier: Water
- Melting point: Approximately 95°C (due to the wax content)
- Viscosity: Less than 50 mPa·s at 25°C
- pH value: 9 at 20°C
Applications: It is primarily employed in the formulation of aqueous mold release agents for aluminum die casting processes.
Special Features and Benefits:
- Wetting: It ensures good wetting of the mold, particularly at elevated temperatures.
- Film-forming: Exhibits excellent film-forming properties, aiding in the creation of a protective layer on the mold surface.
- Adhesion: Provides outstanding adhesion to the mold surface, enhancing the overall quality of the finished molded components.
- Protection: Offers protection to the mold, resulting in excellent surface quality of the final products.
- Stability: Maintains stability even in environments with hard water conditions, ensuring consistent performance.
Recommended Levels: Typically added at concentrations ranging from 10% to 70% based on the total formulation of the release agent.
Incorporation and Processing Instructions: The additive can be diluted with water or directly mixed with all components of the aqueous mold release agent. It can also be used directly as an aqueous mold release agent.
In conclusion, AQUACER 1040 presents significant advantages for the metal die casting industry, providing effective mold release properties, surface quality improvement, and stability, particularly in challenging conditions.