Archives: Listings

AQUACER 537

AQUACER 537 is a paraffin wax emulsion manufactured by BYK-Chemie GmbH. It is designed to improve surface characteristics in aqueous coating systems. Here are the key details about this product:
Composition: It is an anionic emulsion of modified paraffin wax.
Typical Properties:
- Non-volatile matter: 30%
- Carrier: Water
- Melting point: 110 °C
- Viscosity (23 °C, D=400/s): 40 mPa·s
- pH value: 9.5
Storage and Transportation: AQUACER 537 should be stored and transported between 5 °C and 35 °C. It should be mixed well before use due to its temperature sensitivity.
Applications: It is primarily used in the coatings industry.
Special Features and Benefits:
- Hydrophobic effect: It makes coatings water-repellent.
- Antiblocking: It prevents sticking of coated surfaces.
- Surface slip: It improves the ease of movement across coated surfaces.
Recommended Use:
- Furniture and parquet coatings
- Architectural coatings
Recommended Levels:
- 1.5-5% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- The additive should preferably be incorporated into the coating at the end of the production process at a low shear rate. It should be mixed well before use.
In summary, AQUACER 537 is used to enhance the surface properties of aqueous coatings, providing benefits such as water repellency, antiblocking, and improved surface slip.

AQUACER 533

Emulsion of modified paraffin wax manufactured by BYK-Chemie GmbH. It is formulated to enhance surface characteristics in aqueous coating systems. Here are the key details about this product:
Composition: It is an anionic emulsion of modified paraffin wax.
Typical Properties:
- Non-volatile matter (1 h, 125 °C): 40%
- Carrier: Water
- Melting point (wax content): 95 °C
- Viscosity (23 °C, D=800/s): 15 mPa·s
- pH value (20 °C): 9.5
Storage and Transportation: AQUACER 533 should be stored and transported between 5 °C and 35 °C. It should be mixed well before use due to its temperature sensitivity.
Applications: It is primarily used in the coatings industry.
Special Features and Benefits:
- Surface Slip Improvement: AQUACER 533 enhances surface slip in aqueous coating systems, improving the ease of movement across coated surfaces.
- Anti-blocking: It helps prevent sticking of coated surfaces.
- Water Repellency: The additive imparts water repellency to the coated surfaces.
Recommended Use:
- Architectural coatings
- Printing inks and overprint varnishes
- Leather coatings
Recommended Levels:
- 2-4% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- The additive should preferably be post-added using a low shear rate. It should be mixed well before use.
In summary, AQUACER 533 is designed to improve surface properties such as slip, anti-blocking, and water repellency in aqueous coating systems.

AQUACER 532

AQUACER 532 is an emulsion of modified high-density polyethylene (HDPE) wax produced by BYK-Chemie GmbH. It is intended for enhancing surface characteristics in aqueous coating systems. Here are the key details about this product:
Composition: It is a non-ionic emulsion of modified HD polyethylene wax.
Typical Properties:
- Non-volatile matter (60 min., 125 °C): 40%
- Carrier: Water
- Melting point (wax content): 130 °C
- Viscosity (23 °C, D=800/s): < 100 mPa·s
- pH value (20 °C): 3.5
Storage and Transportation: AQUACER 532 should be stored and transported between 5 °C and 35 °C. It needs to be mixed well before use due to its temperature sensitivity.
Applications: It is primarily used in the coatings and printing inks industries.
Special Features and Benefits:
- Rub Resistance Improvement: AQUACER 532 enhances rub resistance, making the coated surfaces more durable against abrasion.
- Scratch Resistance Improvement: The additive improves scratch resistance, helping to maintain the appearance of the coated surfaces.
- Surface Slip Improvement: It enhances surface slip, improving the ease of movement across coated surfaces.
Recommended Use:
- Coatings and printing inks
Recommended Levels:
- 2-5% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- The additive should preferably be post-added using a low shear rate. It should be mixed well before use.
In summary, AQUACER 532 is designed to improve the durability, scratch resistance, and surface slip of aqueous coating systems, particularly in the coatings and printing inks industries.

AQUACER 531

AQUACER 531 is a versatile wax emulsion based on a modified polyethylene (PE) foundation, primarily used to enhance the surface properties of various aqueous coatings, printing inks, dry lubricants, and adhesives. Here's a breakdown of its characteristics and applications:
Composition: It comprises a non-ionic emulsion of a modified polyethylene wax.
Typical Properties:
- pH value: 3.5
- Non-volatile matter: 45% after 60 minutes at 125°C
- Carrier: Water
- Melting point: 125°C (wax content)
- Viscosity: 125 mPa·s at 20°C (D=400/s)
Storage and Transportation: It should be stored and transported within a temperature range of 5°C to 35°C, and it's advised to stir before use.
Applications:
1. Coatings Industry:
  - Special Features and Benefits: Enhances scratch resistance in aqueous coatings, increases abrasion resistance in printing inks, improves surface slip, and blocks resistance.
  - Recommended Use: Suitable for architectural coatings and printing inks/overprint varnishes.
2. Adhesives and Sealants:
  - Special Features and Benefits: Acts as an anti-blocking additive in hot-melt adhesives during underwater pelletizing, producing free-flowing and non-sticking granulated material.
  - Recommended Use: Added directly to the cooling water during the manufacturing process.
3. Thermoplastics:
  - Special Features and Benefits: Prevents compaction and caking of thermoplastic granulated material during underwater pelletizing, resulting in non-sticking and free-flowing granules.
  - Recommended Use: Added directly to the circuit water during underwater pelletizing.
4. Lubricants and Metal Processing:
  - Special Features and Benefits: Used in dry lubricants and anti-friction coatings to adjust the coefficient of friction (CoF) on metallic substrates, forming a uniform wax layer for low CoF.
  - Recommended Use: Can be used alone or with other aqueous binders in dry lubricants, anti-friction coatings, and surface sealers for metal components.
Recommended Levels: Vary based on application:
- For coatings and printing inks: 2–5% additive based on total formulation.
- For adhesives, thermoplastics, and lubricants: Ranges from 0.2% to 10% based on specific application requirements.
Incorporation and Processing Instructions:
- For coatings and printing inks: Preferably incorporated with a low shear rate at the end of the production process.
- For adhesives, thermoplastics, and lubricants: Added directly to the respective processes.
In summary, AQUACER 531 offers multiple benefits across various industries, including enhanced surface properties, anti-blocking capabilities, and improved lubrication, making it a versatile additive for different manufacturing processes.

AQUACER 530

Wax emulsion manufactured by BYK-Chemie GmbH. It is designed to enhance surface characteristics in various aqueous coating systems, including printing inks, overprint varnishes, wood and furniture coatings, as well as inkjet inks. Here are the key details about this product:
Composition: It is a non-ionic emulsion based on an oxidized high-density polyethylene (HDPE) wax.
Typical Properties:
- Non-volatile matter (60 min. at 125 °C): 32%
- Carrier: Water
- Melting point (wax content): 130 °C
- Viscosity (20 °C, D=800/s): < 50 mPa·s
- pH value: 8
Storage and Transportation: AQUACER 530 should be stored and transported between 5 °C and 35 °C. It must be homogenized before use due to its temperature sensitivity.
Applications:
1. Liquid Coatings:
  - Wood coatings: Recommended
  - Printing inks and overprint varnishes: Especially recommended
2. Aqueous Printing Inks and Overprint Varnishes:
  - Improves abrasion resistance and reduces the coefficient of friction.
3. Inkjet Inks:
  - Improves scratch and abrasion resistance without negatively impacting viscosity or gloss.
Recommended Use and Levels:
- Wood Coatings:
  - 2–8% additive (as supplied) based on the total formulation.
- Printing Inks and Overprint Varnishes:
  - 2–11% additive (as supplied) based on the total formulation.
- Inkjet Inks:
  - 1–5% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- AQUACER 530 is preferably added at a moderate shear rate while stirring for all applications.
In summary, AQUACER 530 offers a range of benefits across various aqueous coating systems, including improving mechanical strength, reducing coefficient of friction, enhancing abrasion resistance, and improving scratch resistance, making it suitable for a wide range of applications in the coatings industry.

AQUACER 528

Emulsion based on an ethylene-acrylic acid-copolymer wax, formulated to enhance the surface properties of aqueous care products, particularly for flooring. Here's a breakdown of its key characteristics and applications:
Composition: Non-ionic emulsion of an ethylene-acrylic acid-copolymer wax
Non-volatile matter: 35%
Carrier: Water
Melting point (wax content): 105 °C
Viscosity (20 °C): < 500 mPa·s
pH value (20 °C): 9.5
Applications:
- Care products and polishes, especially for various types of flooring.
Special Features and Benefits:
- Compatible with various polymer dispersions, resin solutions, plasticizers, film-building agents, and surfactants.
- Offers a strong anti-slip effect.
- Exhibits good dirt-repellent properties.
- When mixed with polymers at specific ratios, it enhances anti-slip properties (3:1 ratio) and improves water/alcohol resistance, abrasion resistance, and protection against heel marking (1:6 ratio).
Recommended Use:
- Employed in self-shine floor care products for different types of flooring.
Recommended Levels:
- Typically used at 7-15% additive (as supplied) based on the total formulation.
Incorporation and Processing Instructions:
- Preferably added under agitation after blending the polymers with plasticizers and water, but before incorporating surface-active substances.
This product is versatile and offers various benefits for flooring care products, making it suitable for enhancing both performance and aesthetics.

AQUACER 527

AQUACER 527 is a wax emulsion formulated based on a modified ethylene-vinyl acetate (EVA) copolymer wax. Here's a breakdown of its characteristics and applications:
Composition: It consists of a non-ionic aqueous emulsion of a modified EVA copolymer wax.
Typical Properties:
- Non-volatile matter: 35% after 1 hour at 125°C
- Carrier: Water
- Melting point: 105°C (wax content)
- pH value: 9 at 20°C
Storage and Transportation: It should be stored and transported within a temperature range of 5°C to 35°C, and it's advisable to mix well before use.
Applications:
- Coatings and Printing Inks:
  - Special Features and Benefits: Improves the orientation of effect pigments (e.g., aluminum, mica) in aqueous coating systems. Enhances the anti-slip effect in aqueous printing inks.
  - Recommended Use: Suitable for aqueous effect coating systems, printing inks, and overprint varnishes.
Recommended Levels: Typically added at 5-9% based on the total formulation, though optimal levels should be determined through laboratory tests.
Incorporation and Processing Instructions: It is preferably post-added using a low shear rate, and it's essential to mix well before use.
In summary, AQUACER 527 offers benefits in improving surface characteristics, enhancing pigment orientation, and providing anti-slip effects in aqueous coating systems and printing inks, making it a valuable additive in these applications.

AQUACER 526

AQUACER 526 is an emulsion formulated based on an ethylene/vinyl acetate (EVA) copolymer wax, primarily aimed at improving the surface properties of aqueous effect coating systems. Here's a breakdown of its characteristics and applications:
Composition: It comprises an anionic emulsion of a modified EVA copolymer wax.
Typical Properties:
- Non-volatile matter: 30% after 60 minutes at 125°C
- Carrier: Water
- Melting point: 105°C (wax content)
- Viscosity: 40 mPa·s at 23°C with a shear rate of 800/s
- pH value: 9.7
Storage and Transportation: It should be stored and transported within a temperature range of 5°C to 35°C, and it's advisable to stir before use.
Applications:
- Coatings Industry:
  - Special Features and Benefits: Improves the orientation of effect pigments (e.g., aluminum, mica) in aqueous effect coating systems, enhancing the flip-flop effect. It also reduces short wave defects like mottling and Bénard cells without negatively affecting chemical resistance.
  - Recommended Use: Particularly recommended for aqueous effect coatings, especially for automotive finishes.
Recommended Levels: Typically added at 6-10% based on the total formulation, though optimal levels should be determined through laboratory tests.
Incorporation and Processing Instructions: It is preferably incorporated into the coating at the end of the production process with a low shear rate, and it's essential to stir well before use.
In summary, AQUACER 526 offers benefits in enhancing the aesthetic properties of aqueous effect coatings, especially in automotive finishes, by improving pigment orientation and reducing surface defects.

AQUACER 519

AQUACER 519 is an emulsion formulated with a high-density (HD) polyethylene wax, primarily designed to enhance the surface properties of aqueous care products and polishes. Here's a breakdown of its characteristics and applications:
Composition: It consists of a non-ionic emulsion of HD polyethylene wax.
Typical Properties:
- Non-volatile matter: 35% at 130°C
- Carrier: Water
- Melting point: 125°C (wax content)
- Viscosity: Less than 75 mPa·s at 20°C (measured with Brookfield viscometer)
- pH value: 9.5
Storage and Transportation: It should be stored and transported within a temperature range of 5°C to 35°C, and it's advisable to stir before use.
Applications:
- Care Products and Polishes:
  - Special Features and Benefits: AQUACER 519 enhances buffability, increases filling capacity, and produces an anti-slip effect. These properties are achieved by mixing AQUACER 519 with polymers, with specific ratios enhancing water and alcohol resistance, protection against heel marks (foot traffic resistance), and dirt repellent action. It is compatible with various polymer dispersions and plasticizers.
  - Recommended Use: Suitable for self-shine emulsions and polishes.
Recommended Levels: Typically added at 5-10% based on the total formulation, with optimal levels determined through laboratory tests.
Incorporation and Processing Instructions: The wax additive is preferably added under agitation after mixing the polymers with plasticizers and water, but before incorporating surface-active substances.
In summary, AQUACER 519 offers benefits in improving the performance and surface characteristics of aqueous care products and polishes, making them more effective and durable.

ImerPrint™ 07K

ImerPrint™ 07K is a fine kaolin sourced from deposits in the South West of England, meticulously engineered for optimal performance in offset inks. Its unique properties make it suitable for enhancing print quality and ensuring consistency in offset printing processes.
Specification:
- Brightness (ISO R457): 81.5 ± 4
  Indicates the level of brightness of the kaolin, which influences the vividness and clarity of printed images.
- +300 mesh (mass %): 0.02 maximum
  Specifies the maximum percentage of particles retained on a 300 mesh screen, ensuring uniformity in particle size distribution.
- - 1 μm (mass %): 70 ± 5
  Denotes the percentage of particles smaller than 1 μm, contributing to smooth ink dispersion and improved print quality.
- Moisture (mass % max.): 1.0
  Specifies the maximum moisture content, ensuring optimal handling and preventing issues such as clumping or clogging during ink formulation and application.
Typical Properties:
- Yellowness: 12
  Indicates the degree of yellowness of the kaolin, which can impact the final appearance of printed materials.
- Surface area (BET; m²/g): 15
  Represents the specific surface area of the kaolin particles, influencing their interaction with ink components and print substrate.
- Oil absorption (g/100g): 46
  Indicates the capacity of the kaolin to absorb oil, affecting its compatibility with ink formulations and ink drying properties.
- + 10 µm (mass %): 0.5
  Specifies the percentage of particles larger than 10 µm, ensuring proper ink flow and preventing clogging in printing equipment.
Chemical Analysis by X-ray Fluorescence:
- SiO2 (mass %): 47
  Represents the silica content in the kaolin, contributing to its structural integrity and print performance.
- Al2O3 (mass %): 38
  Denotes the aluminum oxide content, influencing the physical properties and printability of the kaolin.
CAS No.: 1332-58-7
EC No.: 310-194-1
ImerPrint™ 07K is tailored to meet the exacting requirements of offset printing applications, offering superior brightness, particle size distribution, moisture control, and chemical composition to ensure exceptional print results.