Archives: Listings

VANCRYL® 68

VANCRYL® 68 is a solid acrylic resin primarily used in inks and coatings. Here's a breakdown based on the provided technical datasheet:
Introduction:
- VANCRYL® 68 is a solid acrylic resin designed to offer excellent pigment wetting and viscosity stability, particularly suitable for aqueous gravure and flexographic inks.
- In coatings, it provides attributes such as high gloss, scuff resistance, and hardness.
- It is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.
Key Performance Properties:
- Outstanding pigment wetting ensures thorough dispersion of pigments in the ink or coating.
- Excellent transfer properties and hold-out characteristics.
- Low foam generation during application.
- Compatibility with a wide range of vehicles, including most acrylic and maleic resins.
Typical Properties:
- Acid number: 165 mg KOH/g
- Appearance: Solid flake
- Color: Gardner < 2
- Molecular Weight: 20000 (Mw)
- Non-volatile matter: > 99.0%
- Softening Point: 130°C
- Glass Transition Temperature (Tg): 80°C
- VOC (Volatile Organic Compounds): < 1.0%
Starting Point Formulations:
1. Typical Vehicle Formula (30% Solids):
  - VANCRYL® 68 resin: 30.0%
  - Aqua ammonia (28%): 7.0%
  - Water: 63.0%
  - pH: 8.0 - 8.5
  - Viscosity: 1500 – 3000 mPa.s
2. Flexographic Ink Base Grind:
  - Phthalo blue pigment: 32.0%
  - VANCRYL® 68 vehicle (30% Solids): 32.0%
  - Water: 35.0%
  - KNOCKDOWN® 155 defoamer: 1.0%
  - Finished Ink viscosity: 33 s (#2 Zahn)
3. High Gloss Coating:
  - VANCRYL® 989 emulsion: 60.0%
  - VANCRYL® 68 vehicle (30% Solids): 25.0%
  - Michem® Emulsion 32535: 5.0%
  - KNOCKDOWN® 155 defoamer: 1.0%
  - Water: 9.0%
  - pH: 8.5
  - Viscosity: 30 s (#2 Zahn)
Precautions:
- Handle according to standard safety procedures and refer to the Safety Data Sheet for detailed safety information.
Overall, VANCRYL® 68 offers a range of desirable properties for formulating inks and coatings, including excellent pigment wetting, transfer properties, and compatibility with various vehicles. Proper handling and formulation adjustments may be necessary depending on specific application requirements.

EBECRYL® 600/30DP

EBECRYL® 600/30DP is a di functional epoxyacrylate diluted with 30% of dipropyleneglycol diacrylate (DPGDA). Here's a summary based on the provided technical datasheet:
Introduction:
- EBECRYL® 600/30DP is an epoxy acrylate oligomer designed for UV and EB curing systems.
- It features low odor, light color, low irritancy, and fast cure response.
Performance Highlights:
- Fast cure response makes it suitable for applications requiring quick processing.
- Low irritancy and light color contribute to a more user-friendly experience.
- UV/EB cured products based on EBECRYL® 600/30DP exhibit high surface hardness, gloss, excellent solvent resistance, and low residual odor.
Suggested Applications:
- Overprint varnishes
- Screen inks and varnishes
- Coatings on wood, cardboard, chipboard, and rigid plastics
- Paper upgrading
- Coatings requiring low residual odor
Typical Values:
- Viscosity (C&P) at 25°C: 3600 - 4200 mPa.s
- Color, Gardner: max. 2
- Acid value, mg KOH/g: max. 2
Physical Properties:
- Density: 1.15 g/cm3
- Molecular weight, theoretical: 500
- Functionality, theoretical: 2
- Polymer solids, % by weight: 70
- DPGDA, % by weight: 30
Viscosity Reduction:
- EBECRYL® 600/30DP can be diluted with reactive monomers such as DPGDA, 1,6-hexanediol diacrylate (HDDA), trimethylolpropane triacrylate (TMPTA), and tripropyleneglycol diacrylate (TPGDA) to adjust performance properties.
Storage and Handling:
- Avoid exposure to temperatures exceeding 40°C or direct sunlight to prevent uncontrollable polymerization.
- Store in appropriate containers and conditions to maintain stability.
Precautions:
- Take necessary precautions to avoid eye and skin contact and inhalation of aerosols or vapors.
- Consult the Safety Data Sheet for detailed handling procedures and protective equipment.
Overall, EBECRYL® 600/30DP offers a versatile solution for UV and EB curable coatings and inks, providing fast curing, high performance, and ease of handling.

ADDITOL® VXW 6394

ADDITOL® VXW 6394 is a wetting and dispersing agent primarily used for aqueous resin-free pigment concentrates. Here's a summary based on the provided technical datasheet:
Type:
- Wetting and dispersing agent for aqueous resin-free pigment concentrates
Form of Delivery (F.O.D.):
- Active substance: approximately 40%
Tentative Product Data:
- Color/Appearance: Pale yellow to pale brown, clear
- Dynamic Viscosity: 350 - 1500 mPa.s (25 1/s; 23°C)
- Non-Volatile Matter: 38.5 - 41.5% (1 h; 125°C; 1 g)
- Density (Liquids): Approximately 1.04 g/cm³ (20°C)
- Flash Point (Pensky-Martens): > 100°C
Special Properties and Use:
- Suitable for radiation curing systems.
- Prevents flocculation of pigments and enhances stability and color strength of pigment concentrates in aqueous coatings.
- Does not contain organic solvents.
- Recommended dosage varies depending on the type of pigment used.
Dosage (additive as supplied):
- 20 - 30% on inorganic pigments
- 30 - 75% on organic pigments
- 10 - 12% on titanium dioxide
- 130 - 150% on carbon black
Storage Conditions:
- Store between 0 to 25°C in a cool, dry, well-ventilated place.
- Keep container tightly closed.
- Sensitive to frost.
Shelf Life:
- Standard shelf life is 730 days from the date of manufacturing.
- Shelf life may be extended upon re-testing by QC.
Remark:
- Data provided in the publication are based on careful investigations and are subject to change as further experience is gained with the product.
- Users are responsible for testing the product's suitability for their specific use and investigating any potential violation of third-party industrial property rights. Information provided is not binding and does not guarantee specific product properties.

ADDITOL® XL 180

Special phosphoric acid ester to enhance intercoat adhesion of paint films
Form of Delivery (f.o.d.): Active substance approximately 98%
Product Data:
- Dynamic Viscosity: 200 - 500 mPa.s (DIN EN ISO 3219, 25 1/s; 23°C)
- Iodine Colour Number: <= 15 (DIN 6162)
- Acid Value: 260 - 340 mg KOH/g (DIN EN ISO 2114)
- Non-Volatile Matter: 88 - 92% (DIN 55671, 150°C; 10 min)
- Colour / Appearance: Brown / Clear (VLN 250)
- pH-Value: 2 - 3 (DIN ISO 976, 10%)
- Density (Liquids): Approximately 1.02 g/cm³ (DIN EN ISO 2811-2, 20°C)
- Flash Point: 72°C (DIN EN ISO 1523)
Special Properties:
- Enhances intercoat adhesion of stoving paints and fast-drying air-drying paints on electrodeposition primers, white electrodeposition paints, and primers.
Dilutability:
- Dilutable with aliphatic and aromatic hydrocarbons, ketones, esters, and alcohols. Not dilutable with water in its form of delivery.
Suggested Uses:
- Improves intercoat adhesion between finish and primer.
- Excellent compatibility with many binder systems, suitable for universal use.
- Best used neutralized with amines, preferably triethylamine, in water-dilutable systems.
- Increases adhesion and enhances flexibility of stoving alkyd or acrylic resin paints to primers and white paints applied by electrodeposition.
- Not efficient in single coats on iron and aluminum.
- Compatible with non-ionic and anionic substances with interfacial activity. Compatibility with cationic substances should be checked individually.
Processing:
- Add to finished paint prior to final adjustment of viscosity.
- Doses are governed by the nature of the binder, usually between 0.1 - 1% on total paint.
- Efficiency should be checked prior to batch production.
- If neutralized with amines, wear goggles for eye protection.
Storage:
- At temperatures up to 25°C, storage stability packed in original containers amounts to at least 730 days.
Note:
- The non-volatile matter content of a product depends on the temperature and period of heating used for the test. DIN EN ISO 3251 primarily provides relative, not true, values for non-volatile matter content.

ADDITOL® XL 480

Levelling agent without addition of silicone, amine resin modified acrylic copolymer
Form of Delivery (f.o.d.): Active substance approximately 70%
Special Properties:
Additive to improve surface quality of paint films, particularly automotive coatings.
Product Data:
Dynamic Viscosity: 150 - 280 mPa.s (DIN EN ISO 3219, 25 1/s; 23°C)
Iodine Colour Number: <= 2 (DIN 6162)
Non-Volatile Matter: 69 - 71% (DIN 55671, 120°C; 5 min)
Colour / Appearance: Colourless to light yellow / Clear (VLN 250)
Density (Liquids): Approximately 0.98 g/cm³ (DIN EN ISO 2811-2, 20°C)
Flash Point: 37°C (DIN EN ISO 1523)
Suggested Uses:
Additol XL 480 may be used with any type of paint material, e.g., alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc.
Prevents surface defects of paint films, including cratering and defects caused by applicational conditions.
Provides higher security against surface defects on application.
Processing:
Recommended usage level: 0.1 - 0.5% of Additol XL 480 on paint.
Effectiveness of higher levels should be individually checked.
Can be added prior to or after dispersion. Sequence of ingredients in paint preparation does not influence the effect.
Can also be added as a solution diluted with normal solvents such as aromatic hydrocarbons, alcohols, or glycol ether esters.
Effect becomes prominent immediately after incorporation into the paint and remains stable after prolonged storage. No negative influences on mechanical or applicational properties observed.
Storage:
At temperatures up to 25°C, storage stability packed in original containers amounts to at least 730 days.
Remarks:
Data contained in this publication are based on careful investigations and are intended for information only. Users are obliged to carry out tests under their own responsibility to determine suitability for a particular use and to investigate possible violations of intellectual property rights of third parties. Information is not binding and cannot guarantee specific properties of products.

BECKOPOX™ EM 2120w/45WA

Epoxy-Amine-Adduct, cationic, dispersion in water
Form of Delivery (f.o.d.): 45% in water (45WA)
Preliminary Product Information:
- This product is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect.
Tentative Product Data:
- Dynamic Viscosity: 25 - 1000 mPa.s (DIN EN ISO 3219, 10 1/s; 23°C)
- pH-Value: 4.0 - 6.0 (DIN ISO 976, 10%)
- Non-Volatile Matter: 43.5 - 46.5% (DIN EN ISO 3251, 1 h; 125°C; 1 g)
- Density (Liquids): Approximately 1.07 g/cm³ (DIN EN ISO 2811-2, 20°C)
- Flash Point: > 95°C (CCCFP, ASTM D 6450)
Special Properties and Use:
- Beckpox EM 2120w is suited to formulate waterborne 1-pack anticorrosive primers and 1-pack single coats with good anticorrosive properties, especially on smooth steel.
- Very fast drying coatings can be formulated with Beckopox EM 2120w.
- Pigments and extenders should be dispersed in a pigment paste since Beckopox EM 2120w does not possess sufficient shear stability.
- Organic solvents in the formulation should be added to the pigment paste or should be diluted with water before adding to EM 2120.
Storage:
- At temperatures up to 25°C, storage stability packed in original containers amounts to at least 365 days.
- Protect from freezing; at low temperatures, it should be stored under "keep from freezing" conditions.
- Lowest storage temperature: 0°C
Remarks:
- Data contained in this publication are based on careful investigations and are intended for information only. Due to scale up of this product, there is not yet sufficient experience concerning serial production. Future knowledge may lead to changes in product data and other indicated properties in upcoming Technical Data Sheets. The right to leave the product name unchanged, even if product data or other indicated properties vary from the present product info, is reserved.
- Regardless of the data contained in this publication, any user is obliged to carry out tests under their own responsibility as to the suitability of the product for a particular use and to investigate the possible violation of industrial property rights of third parties. Information is therefore not binding and cannot be construed as guaranteeing specific properties of products. General Sales Conditions apply.

ACURE™ 510-170

Malonate functional polyester resin with a CH equivalent weight of 212 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide.
Solvent Composition: Butyl Acetate
Specifications:
- Non-Volatiles: 84 - 86% (ISO 3251, STM 001G)
- Viscosity: 5.0 - 10 Pa.s (ISO 3219, STM 012J)
- Acid Value (as such): Maximum 0.7 mg KOH/g (ISO 3682, STM 303A)
- Colour APHA (Lico): Maximum 200 APHA (ISO 6271, STM 008F)
- Appearance: Clear, free of extraneous matter (STM 017A)
Typical Properties:
- Density: 1.10 kg/dm3 (DIN 53217)
- Flash Point: 39°C (ISO 1523)
Technical Features:
- Extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems.
- ACURE topcoats feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities, and outstanding chemical resistance.
- ACURE paints exhibit long pot lives and tuneable open times.
- The succinimide in ACURE 510-170 acts as a "kinetic additive," increasing open time and gloss of ACURE paints.
- The base resin used in ACURE 510-170 is compositionally the same as ACURE 510-100.
- ACURE 510-170 provides a production-friendly manner of incorporation of succinimide into ACURE paints.
Application:
- Topcoat for industrial applications
Storage Conditions:
- Keep container tightly closed and dry in a cool, well-ventilated place.
- Keep away from heat, sparks, flame, and other sources of ignition.
Shelf Life:
- Standard shelf life is 365 days from the date of manufacturing but may be extended based upon retesting by allnex Quality Control.

SETAQUA® 6782

A surfactant-free aqueous dispersion of acrylic polymers.
Solvent Composition: Demineralized water
Specifications:
- Non-Volatiles: 39 - 41% (ISO 3251, STM 001G)
- Viscosity Brookfield: Maximum 27 cPa.s (Spindle 3, 50 rpm, 23°C) (ISO 2555, STM 012F)
- pH: 7.5 - 9.5 (STM 007A)
Typical Properties:
- MFFT: Approximately 11°C (ASTM D 2354, STM 087A)
- Particle Size: Approximately 90 nm (STM 016A)
- Density: Approximately 1.04 kg/dm3 (DIN 53217)
Technical Features:
- Contains dual self-crosslinking mechanisms for improved adhesion, hardness, chemical resistance, blocking, fast drying, and outdoor durability.
Application:
- Air-drying interior and exterior pigmented and non-pigmented wood finishes for the joinery industry.
Storage Conditions:
- Should not be stored at temperatures below 0°C or above 35°C.
- Avoid exposure to direct sunlight and prevent freezing.
Shelf Life:
- Standard shelf life is 365 days from the date of manufacturing, but may be extended based upon retesting by allnex Quality Control.
Please note that STM refers to allnex's method of determination, and STM 001G specifically indicates that demineralized water is used as a spreading agent.

PHENODUR® PR 51660B

Curable, unplasticized phenolic resin
Form of Delivery (F.O.D): 60% in butanol (60B)
Uses:
- Excellent adhesion, hardness, and flexibility in combination with epoxide resins.
- Very good resistance against chemicals, mineral oils, and food.
- Preferably used for the interior coating of metal packaging goods.
Product Data:
- Dynamic Viscosity (Ubbelohde): 150 - 500 mPa.s (at 23°C)
- Non-Volatile Matter: 58 - 62% (1 h; 135°C; 2 g; B)
- Iodine Colour Number: <= 150
- Density (Liquids): Approximately 1.03 g/cm³ (at 20°C)
- Flash Point: Approximately 30°C
Dilutability and Compatibility:
- Unlimited dilutability with alcohols, esters, and ketones.
- Limited dilutability with aromatic and aliphatic hydrocarbons.
- Compatible with high molecular weight epoxide resins and poly vinyl butyrals.
Properties and Uses:
- Developed for combination with high molecular weight epoxide resins for transparent, heat-curing coatings.
- Suitable for interior coating of metal packaging goods like collapsible tubes, cans, and containers for water, oils, and food.
- Resistant to a variety of acids, alkalines, organic solvents, and food.
Processing:
- Stoved for 10 - 20 min at 190 - 210°C for full cure; acidic catalysts like Additol XK 406 may be used to reduce temperature to 180 - 200°C and improve adhesion and hardness.
- First coats in multiple layer coatings not fully cured; complete cure after last coat application.
- Addition of approximately 1 - 3% melamine resin like Maprenal MF 800 acts as an excellent flow agent.
- Precondensation between phenolic and epoxide resin at approximately 100°C improves coating flow.
- Mixing ratio between Phenodur PR 516 and epoxide resin should be between 1:2 and 1:4 (calculated as solid resins).
- Light color of cured film can be tinted with coloring resin like Phenodur PR 308 towards a "gold lacquer."
Storage:
- Stability packed in original containers at temperatures up to 25°C for at least 365 days.
Distinguishing Features:
- More reactive and lighter in color than Phenodur PR 217, PR 722, PR 723, and PR 897.
- Comparable to Phenodur PR 515 but does not contain Bisphenol A as a monomer.

SETAQUA® 6718

Self-crosslinking surfactant-free acrylic dispersion designed for interior durable industrial finishes. Here's a summary of its technical datasheet:
Type:
- Self-crosslinking surfactant-free acrylic dispersion.
Form of Delivery (F.O.D):
- 40.0% non-volatile in demineralized water.
Product Data:
- Solids Content: 40.0 ± 1.0% by weight.
- Viscosity (Brookfield at 23°C): Maximum 500 mPa.s.
- pH (25°C): 7.5 – 8.5.
- Minimum Film-Forming Temperature (MFFT): Approximately 40°C.
- Appearance: Translucent liquid.
- Density: 1.04 kg/dm3.
Performance Highlights:
- Good in-can and dry-film clarity.
- Fast air dry and good sanding properties.
- High hardness and excellent stacking properties.
- Excellent water and chemical resistance.
Suggested Uses:
- Waterborne primer and topcoat.
- Air-drying or forced drying, interior pigmented and clear industrial finishes.
- Highly transparent, colorless clear coat over lightly colored substrates.
- Suitable for mass production on fast industrial wood coating lines.
Storage and Handling:
- Avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Store indoors in original, unopened, undamaged containers in a dry place at storage temperatures between 5°C and 35°C.
- Keep containers tightly closed and use with adequate ventilation.
Shelf Life:
- Standard shelf life is 180 days from the date of manufacturing.
- Shelf life may be extended upon re-testing by QC for products still in allnex possession.
Users are advised to perform their own tests to determine suitability for specific purposes and to follow appropriate safety measures during handling and storage.