Archives: Listings

ADDITOL® VXL 4992

ADDITOL® VXL 4992 is a wetting and dispersing agent primarily used for inorganic pigments and fillers in UP (unsaturated polyester) knifing putties. Here's a breakdown of its key features and properties as outlined in the technical datasheet:
Type: Wetting and dispersing agent for inorganic pigments and fillers in UP knifing putties.
Product Data (determined per batch):
- - Colour / Appearance: Brown
  - Non-Volatile Matter: 48 - 52% (1 h; 125 °C; 2 g)
Special Properties:
- - Improves pigment wetting
  - Shortens dispersion time
  - Reduces viscosity
  - Enables an increase in pigment and filler concentration
  - Improves air release
  - Enhances leveling and flow properties of the final product
Suggested Uses:
- - Used as a wetting and dispersing agent in high-body UP knifing fillers and glass fiber reinforced pigmented polyesters.
  - No change in storage stability and processing was determined in the systems.
Processing:
- - Jointly dispersed with pigments and fillers.
  - Recommended quantity: 0.5 - 2% calculated on pigment and filler.
  - Optimal quantity to be added should be determined in pretrials.
Storage:
- - Stable at temperatures up to 25°C when packed in original containers for at least 730 days.
Distinguishing Features:
- - Better wetting agent than Additol XL 425.
Overall, ADDITOL® VXL 4992 serves as an effective wetting and dispersing agent, improving the processing and performance of UP knifing putties by facilitating pigment dispersion, reducing viscosity, and enhancing overall product quality.

MODAFLOW® AQ 3025

MODAFLOW® AQ 3025 is an acrylic flow additive designed for aqueous coatings, without silicone addition. Here are the key details outlined in the technical datasheet:
- Type: Acrylic flow additive for aqueous coatings.
- Form of Delivery (f.o.d.): Active substance, approximately 25%.
- Product Data (determined per batch):
  - Dynamic Viscosity (Brookfield): 25 - 250 mPa.s (1; 100 1/min; 25 °C)
  - Colour Scale (Hazen): <= 200
  - Non-Volatile Matter: 23 - 27% (1 h; 150 °C; 2 g)
  - pH-Value: > 8 (10%)
- Suggested Uses:
  - Suitable for radiation curing systems.
  - Developed for use in water-reducible, latex, and dispersion systems.
  - Compatible with a broad range of chemistries.
  - Amine neutralized in water and contains no organic solvents or silicone.
- Processing:
  - Promotes flow, leveling, provides surface defect control, and aids pigment dispersion.
  - Suggested use level is 1 - 2% Modaflow AQ 3025 solids on total coating resin solids.
  - May allow the formulator to reduce solvent content or number of surface modifiers in the coating.
- Storage:
  - Stable at temperatures up to 25 °C when packed in original containers for at least 365 days.
MODAFLOW® AQ 3025 is designed to enhance the performance of aqueous coatings by promoting flow, leveling, surface defect control, and aiding pigment dispersion. It offers compatibility with various coating systems and can be incorporated easily due to its low viscosity.

EBECRYL® 4201

EBECRYL® 4201 is an undiluted aliphatic urethane acrylate primarily used in wood coatings, particularly for cork and parquet. Here's a summary of its key features and properties:
- Type: Tin-free aliphatic urethane acrylate, meaning it does not contain intentionally added organic tin compounds.
- Introduction:
  - Designed for wood coatings (cork and parquet) with high grit feeder abrasion resistance.
- Performance Highlights:
  - UV/EB cured coatings based on EBECRYL® 4201 exhibit:
    - High elasticity
    - Good chemical and mechanical resistance properties
    - Outstanding abrasion resistance, particularly according to the grit feeder method.
- Suggested Applications:
  - Formulation of UV/EB energy curable coatings for roller coating, spraying, and curtain coating on wood, cork, furniture, paper, parquet, and film.
- Formulating:
  - Can be adjusted to application viscosity using standard reactive diluents such as dipropylene glycol diacrylate (DPGDA), 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), and trimethylolpropane triacrylate (TMPTA), or solvents such as butyl acetate.
  - Compatibility with reactive diluents and solvents must be tested in each case.
  - UV curing requires the addition of standard commercial photo initiators.
  - Lower gloss coatings can be produced using standard matting agents.
- Specifications:
  - Appearance: Clear liquid
  - Color, Apha: Maximum 200
- Typical Physical Properties:
  - Acid number, mg KOH/g: ≤ 2
  - Flash point, °C: > 100
  - Functionality: 4.0
  - Hydroxyl content, %: Approximately 0.3
  - Viscosity, 23°C, mPa.s: Approximately 7500
- Typical Cured Properties:
  - Tensile strength: 1150 psi (8.0 MPa)
  - Elongation: 17%
  - Young's modulus: 11900 psi (82 MPa)
  - Glass transition temperature (Tg): 20°C
- Precautions:
  - Follow safety guidelines outlined in the Safety Data Sheet (SDS).
- Storage and Handling:
  - Avoid exposure to high temperatures, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
  - Store in appropriate containers and avoid procedures that remove or displace oxygen from the material.
  - Recommended storage temperature range should be consulted from the SDS.
Overall, EBECRYL® 4201 is a versatile component in UV/EB energy curable coatings, offering excellent abrasion resistance and other desirable properties for wood coating applications.

ADDITOL® XW 390

ADDITOL® XW 390 is a flow and wetting agent without silicone addition designed for waterborne coating systems. Here's a breakdown of its key features and properties:
- Type: Flow and wetting agent without silicone addition for waterborne coating systems.
- Form of Delivery (f.o.d.): Active substance, approximately 50%.
- Product Data (determined per batch):
  - Dynamic Viscosity: 350 - 520 mPa.s (40% propylene glycol monomethyl ether; 25 1/s; 23 °C).
  - pH-Value: 8.0 - 9.5 (10%).
  - Non-Volatile Matter: 48 - 52% (150 °C; 10 min).
- Special Properties:
  - Prevents flow defects in all waterborne coating systems and promotes substrate wetting without affecting recoat adhesion.
- Suggested Uses:
  - Applicable in all commonly used air-drying and stoving waterborne coatings systems, especially in alkyd/melamine stoving coatings, air-drying alkyd resin coatings, phenolic resin coatings, and epoxy resin coatings.
- Processing:
  - Can be added at any stage of coatings manufacture, preferably in the pigment dispersion. Effective at levels between 0.1 - 1.0% based on binder, with higher dosages required in special cases.
- Storage:
  - Stable when stored at temperatures up to 25 °C in original containers for at least 365 days. The color may darken on storage, but this does not affect the results.
- Distinguishing Features:
  - Suppresses cratering in paint films more effectively than Additol XW 395, particularly at very low film thicknesses.
Overall, ADDITOL® XW 390 is a specialized additive used to improve flow, wetting, and film formation in waterborne coating systems, particularly useful in preventing defects like craters and ensuring uniform substrate coverage.

SETALUX® 81198 SS-55 YA

SETALUX® 81198 SS-55 YA is a type of acrylic polyol with a specified OH (hydroxyl) content, modified with a sag control agent (SCA). Acrylic polyols are polymers that contain hydroxyl groups and are often used in coatings and adhesives.
Here's a breakdown of the provided information:
- Solvent Composition: Butyl acetate
- Specifications:
  - Non-Volatiles: 53 - 56%
  - Viscosity flowcurve at different shear rates
  - Amine content: Maximum 6.0 mmol/kg
  - Fineness: Maximum 15 microns
- Typical Properties:
  - Appearance: Thixotropic (having a viscosity that decreases under shear stress to allow for easy application), hazy
  - Density: 1.00 kg/dm3
  - Flash point: 26 °C
- Technical Features:
  - When used with aliphatic polyisocyanates, it provides high build and gloss, high sagging limit, fast drying, excellent mechanical properties and chemical resistance, good clarity after drying at room temperature, high end hardness, and good adhesion results on metallic base coats.
- Application:
  - Used in varnishes, clearcoats, and solid color systems for car repair (e.g., cars, trains, tram units), as well as industrial topcoats for big rolling stock.
- Compatibility:
  - Limited compatibility with methanol, ethanol, acetone, and methyl ethyl ketone.
- Storage Conditions:
  - Store tightly closed and dry in a cool, well-ventilated place, away from heat, sparks, flame, and other sources of ignition.
- Shelf Life:
  - Standard shelf life is 180 days from the date of manufacturing, but it may be extended based upon retesting by allnex Quality Control.
This product is typically used in the automotive industry and industrial applications for coating purposes. It offers specific technical properties and should be handled and stored according to the provided instructions for optimal performance.

BECKOPOX™ EP 117

BECKOPOX™ EP 117 is a type A/F liquid epoxy resin that is reactive diluted. Here are the key details from the technical datasheet:
Type: A/F - liquid epoxy resin; reactive diluted
Form of Delivery (f.o.d.): 100%
Special Properties and Use:
- Non-crystallizing, reactive diluted liquid resin used for chemical-resistant coatings, concrete injections, adhesives, troweling casting, and laminating compounds.
Product Data:
- Dynamic Viscosity: 800 - 1200 mPa.s (100 1/s; 23°C)
- Epoxy Equivalent: 175 - 185 g/mol
- Iodine Colour Number: <= 5
- Density (Liquids): Approximately 1.13 g/cm³ (20°C)
- Flash Point (Pensky-Martens): > 100°C
Dilutability:
- Compatible with special white spirit, methoxypropyl acetate, xylene, methoxypropanol, acetone, ethanol, methyl ethyl ketone, methyl isobutyl ketone, isopropanol.
Compatibility:
- Compatible with various epoxy resins and other binders depending on the percentage used.
Suggested Uses and Processing:
- Used for highly loaded mortars for industrial flooring, highway repair mortar, non-slip coatings, metallic and concrete loading ramps, concrete repair mortar, adhesives, and adhesive mortars.
Storage:
- Storage stability at temperatures up to 25°C packed in original containers amounts to at least 365 days.
Distinguishing Features:
- A resin with adjusted viscosity using a reactive diluent, retaining non-crystallizing properties while enhancing extender/pigment loading capacity.
Safety at Work and Environmental Protection:
- Observance of rules and regulations established by local authorities when handling and processing epoxy resins and hardeners is recommended. A Material Safety Data Sheet is available on request.
Producer: Novares LA 700 (VFT AG)
This epoxy resin offers a range of applications in various industries due to its versatile properties and compatibility with different systems.

ADDITOL® XL 6568

ADDITOL XL 6568 is an anti-adhesion promoter primarily used in the formulation of stripping enamels, release agents, and temporary corrosion protection coatings. Here are the key details:
Type: Anti-adhesion promoter
Form of Delivery (f.o.d.):
- Active substance: approximately 96%
Tentative Product Data:
- Color/Appearance: Yellow-brown, clear
- Dynamic Viscosity: 800 - 1500 mPa.s (25 1/s; 23°C)
- pH-Value: 7.5 - 8.5 (10% solution)
- Density (Liquids): Approximately 1.02 g/cm³ (20°C)
- Flash Point (CCCFP): > 95°C
Special Properties and Use:
- ADDITOL XL 6568 is added to stripping enamels as an anti-adhesion promoter, providing temporary protection against mechanical attack and corrosion to various substrates.
- It can be used in both solvent-based and aqueous systems.
Processing:
- Soluble in water and most solvents.
- Recommended dosage: 2 - 3% on total solids for solvent-based systems, 2 - 5% for aqueous systems.
Storage:
- Storage stability at temperatures up to 25°C in original containers amounts to at least 730 days.
- Becomes wax-like at temperatures below 0°C but can be turned liquid again by carefully warming up to room temperature.
Distinguishing Features:
- Non-hazardous alternative to Additol VXL 1105.
Producer:
- Mowital: Kuraray Europe GmbH, Höchst Industrial Park, 65926 Frankfurt / Main, Germany
Remark:
- Data are subject to change based on future knowledge and experience. Users are advised to conduct their own tests to determine suitability for specific uses.

ADDITOL® TPO

ADDITOL® TPO is an alpha cleavage photoinitiator primarily used in UV-curable formulations containing unsaturated materials like acrylates, methacrylates, vinyls, and unsaturated polyesters. Here are the key details:
Introduction:
- ADDITOL® TPO generates radicals upon exposure to UV light, initiating polymerization through the unsaturated groups present in the system.
- Particularly suitable for UV curing of white pigmented formulations and thick clear coatings.
Performance Highlights:
- Characterized by low odor and low volatility.
- UV-cured products containing ADDITOL® TPO exhibit low yellowing and increased depth of cure.
Suggested Applications:
- Typically used at levels of 0.5 - 2% by weight based on the reactive components of the formulation.
- Commonly used in screen inks, particularly white, white flexographic inks, white offset inks, thick clear coatings, and pigmented coatings, especially white ones.
Specifications:
- Appearance: Yellow powder
- Melting Point: 87 - 94°C
- Purity: Minimum 98%
- Volatiles: ≤ 0.5%
- Molecular Weight: 348
- Extinction Coefficients:
  - 296 nm: 8.864 (litres gram⁻¹ cm⁻¹)
  - 380 nm: 1.566
Absorption Spectrum: Provides information on the wavelengths of light absorbed by the photoinitiator.
Precautions:
- Users should consult the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.
Storage and Handling:
- Store in a dry area away from direct sunlight and exposure to UV or visible light.
- Keep containers closed and protect from physical damage.
- Refer to the SDS for the recommended storage temperature range.

ADDITOL® VXL 6237 N

ADDITOL® VXL 6237 N is a cationic, highly molecular resin-like wetting and dispersing agent primarily designed for inorganic and organic pigments. Here are the key details:
Type:
- Cationic, highly molecular resin-like wetting and dispersing agent
Form of Delivery (F.O.D.):
- Active substance approximately 30%
Preliminary Product Information:
- This product is intended for trial purposes only and is subject to potential deviations during transfer into commercial-scale manufacturing.
Tentative Product Data:
- Color/Appearance: Yellow-brown, clear liquid
- Non-Volatile Matter: Approximately 29 - 31%
- Iodine Colour Number: Less than or equal to 12
- Density (Liquids): Approximately 1.01 g/cm³ at 20°C
- Flash Point: Approximately 44°C
Special Properties:
- Improves the wetting of difficult-to-disperse pigments, especially in aromatic-free solventborne high-grade automotive, car repair, and industrial paints.
- Shortens dispersing time and prevents pigment reflocculation.
- Enhances gloss and leveling of paints.
Suggested Uses:
- Permits higher pigmentation of mill base without increasing viscosity and shortens dispersing time.
- Results in high colloidal stability in pigment pastes and paints without tendency to pigment reflocculation.
- Exhibits a stabilizing effect on binders in solvents containing acrylate systems.
Processing:
- Must be ground jointly with pigments.
- Recommended addition rate ranges from 3.0% to 10.0% for inorganic pigments and 10.0% to 50.0% for organic pigments.
Storage:
- Stable for at least 730 days at temperatures up to 25°C when stored in original containers.
- Opened vessels should be closed immediately.
Distinguishing Features:
- Non-crystallizing version allowing storage at low temperatures without altering application characteristics.
- More effective in aliphatic solvent-based resins compared to other similar additives.
Note:
- The data provided is based on preliminary investigations and may be subject to change based on future knowledge and experience. Users are advised to conduct tests to determine suitability for specific applications and investigate any potential violation of industrial property rights. The information provided is not binding and does not guarantee specific product properties.

SETAQUA® 37-1371

SETAQUA® 37-1371 is a styrene acrylic emulsion with fine particle size that forms hard, impact-resistant films with high water, salt spray, and mineral spirit resistance. Here's a breakdown of its specifications, performance highlights, suggested uses, storage recommendations, and precautions:
Type:
- Acrylic copolymer emulsion
Form of Delivery (F.O.D.):
- 48% non-volatile in demineralized water
Product Data:
- Non-Volatile, by weight: Approximately 48%
- pH value: Approximately 8.4
- Viscosity, Brookfield: Approximately 700 cps
- Particle size: 0.10 microns
- Minimum Film Formation Temperature (MFFT): 20°C
Performance Highlights:
- Excellent water, salt spray, and mineral spirit resistance
- Superior adhesion to new galvanized metal
- Can be over-coated with latex or enamel gloss paints
Suggested Uses:
- Anti-corrosive coatings
- Metal maintenance coatings
- Galvanized iron primers
Storage:
- Stable for 9 months at temperatures between 40°F and up to 100°F when stored in the original sealed containers.
Precautions:
- Before using SETAQUA 37-1371, refer to the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.
- Store away from freezing temperatures and avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Handle with care and wash thoroughly after handling. Keep the container tightly closed and use with adequate ventilation. Refer to the SDS for the recommended storage temperature range.