Archives: Listings

SETAQUA® 6006

SETAQUA® 6006 is a urethane-modified, co-solvent-free, short oil alkyd resin emulsion. Here's an overview of its characteristics and applications:
Type:
- It's a part of the ECOWISE™ CHOICE product range for selected applications.
Solvent Composition:
- Demineralized water
Specification:
- Non-Volatiles: 51 - 53%
- Viscosity (23 °C at 100 s-1): 0.18 - 0.53 Pa.s
- pH: 6.8 - 8.0
Typical Properties:
- Freeze-thaw stability: Limited
- Mechanical stability: OK
- Density: Approximately 1.09 kg/dm3
Technical Features:
- When combined with water-reducible metal or combination driers, it offers very fast drying properties with excellent stain blocking and wood penetration capabilities.
Application:
- Suitable for air-drying decorative and industrial wood and metal primers, as well as isolating wall primers.
Storage Condition:
- It's advised not to store it in plastic containers but in metal containers with an internal coating.
- Store at temperatures above 0 °C and below 35 °C.
- Avoid exposure to direct sunshine and prevent freezing.
Shelf Life:
- The standard shelf life is 365 days from the date of manufacturing. Shelf life extension may be considered upon re-testing by QC for products still in possession of allnex.
SETAQUA® 6006 is designed for applications where fast drying, stain blocking, and wood penetration are essential, making it suitable for both wood and metal primers.

SETALUX® 1276 SS-60

SETALUX® 1276 SS-60 is an acrylic polyol with 2.7% OH (calculated on non-volatiles). Here's a breakdown of its characteristics and applications:
Solvent Composition:
- It consists of butyl acetate and methyl ethyl ketone in a 6:1 ratio.
Specification:
- Non-volatile content: 59.0 - 61.0%
- Acid value (as such): 10.0 - 13.0 mg KOH/g
- Viscosity (@ 23 °C at 100 s-1): 1.0 - 2.0 Pa.s
- Colour APHA (Lico): max. 100 APHA
- Appearance: Clear, free of extraneous matter
Typical Property:
- Density (20 °C): 1.00 kg/dm3
- Flash point: Approximately 17 °C
Technical Features:
- Extremely fast cure, hydroxy-functional acrylic polyol for two-component vehicle refinish applications.
- Fast curing with excellent early hardness development and chemical resistance. Ready to buff in 30 minutes.
- Contributes to excellent application properties, gloss, and DOI (Distinctness of Image).
Application:
- Used as a clearcoat for vehicle refinish and transportation.
- Also employed as a modifier resin for two-component clearcoat systems.
Storage:
- Recommended storage conditions include being under cover, out of direct sunlight, and avoiding extreme temperature changes.
- Shelf life under normal storage conditions (5-35°C) in sealed, unopened containers is 12 months from the date of manufacture.
Compatibility:
- Compatible with various acrylic polyols and other materials, as indicated in the compatibility table provided.
Dilutability:
- Dilutable with various solvents, including xylene, toluene, ethyl acetate, butyl acetate, acetone, methyl ethyl ketone, ethanol, and butanol.
SETALUX® 1276 SS-60 offers rapid curing and excellent performance characteristics, making it suitable for clearcoat applications in the automotive industry and other transportation sectors.

ADDITOL® VXW 6208/60

ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive primarily designed for solvent-borne, solvent-free, and water-dilutable paint systems. Here are some key details about it:
Type:
- Polymeric non-ionic dispersing and wetting additive.
Form of Delivery (f.o.d.):
- Active substance: Approximately 60%.
Product Data:
- Dynamic Viscosity: 300 - 2000 mPa.s (at 25 1/s; 23 °C)
- Non-Volatile Matter: 58 - 62%
- Colour/Appearance: Yellow-brown
- Density (Liquids): Approximately 1.03 g/cm³ (at 20 °C)
- Flash Point: Approximately 40 °C
Special Properties:
- Enhances gloss and stabilizes the achieved degree of gloss.
- Decreases viscosity, especially in high-filled paint systems.
- Not compatible with binders dissolved in aliphatic hydrocarbons.
Suggested Uses:
- Suitable for radiation curing systems.
- Used for the production of binder-free pigment pastes and for tinting base colors.
- Mainly applied as a wetting agent in solvent-free and solvent-borne two-pack epoxy systems.
Processing:
- Must be ground with pigments and fillers.
- Recommended dosage for the production of binder-free pigment pastes varies depending on the type of pigment.
- Recommended dispersing solution consists of a mixture of Additol VXW 6208/60, propylene glycol, and methoxy propanol.
- Dosage as a wetting agent in two-pack epoxy systems ranges from 1 to 5% on pigment and filler.
Storage:
- Storage stability packed in original containers at temperatures up to 25 °C is at least 730 days.
- Long-term exposure to temperatures below 10 °C may cause cloudiness and crystallization, which can be reversed by warming up the product.
Distinguishing Features:
- Dissolved in solvents that are compatible with deionized water, unlike Additol VXW 6208.
ADDITOL® VXW 6208/60 serves as a versatile additive to enhance the performance of various paint systems, particularly in terms of dispersing, wetting, and viscosity reduction.

PHENODUR® PR 401/72B

PHENODUR® PR 401/72B is a curable unplasticized phenolic resin delivered in a solution with 72% butanol. It finds application in various coating scenarios:
Uses:
- Coating interior and exterior surfaces of packaging containers and cans.
- High adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.
- Heat-curing phenolic/epoxide resin combinations.
- Heat-curing phenolic/polyvinylbutyral combinations.
- Physically drying paints with resistance to fuel and oil.
Product Data:
- Dynamic Viscosity: 200 - 1000 mPa.s (at 23°C)
- Non-Volatile Matter: 70 - 74%
- Iodine Colour Number: <= 2 mg I / 100ml
Physical Properties:
- Density: 1.03 g/cm³ (at 20°C)
- Dilutability: Compatible with various solvents including white spirit, ethyl acetate, xylene, butyl acetate, solvent naphtha, and more.
Properties and Uses:
- Can Coating: Forms high-adhesion, chemically resistant films with good flexibility for internal and external coating of cans, tubes, and packaging containers.
- Chemically Resistant Protective Coatings: Can be used as a sole binder in high-resistant stoving enamels, especially when combined with polyvinyl butyrals or epoxide resins.
Processing:
- Preparation involves mixing with other resin solutions at room temperature using suitable solvents.
- Stoving conditions range from 10 to 30 minutes at 180 to 210°C, depending on the application and film thickness.
- Catalysis: Acid catalysts like ADDITOL® XK 406 are recommended.
Storage:
- Storage stability packed in original containers at temperatures up to 25°C is at least 730 days.
- Expiration date may be extended and Certificate of Analysis updated after QC testing of retained samples, only for material in allnex possession.
Safety and Handling:
- Consult the Safety Data Sheet (SDS) for safety, health, and environmental data available from allnex.
Distinguishing Features:
- Films based on PHENODUR® PR 401 are almost colorless.
- Suitable grades for combination with epoxide resins include PR 217, PR 285, PR 401, PR 722, PR 723, and PR 897.

SETALUX® 91767 VX-60

SETALUX® 91767 VX-60 is a type of acrylic polyol with 4.5% OH (hydroxyl) content, modified with a sag control agent (SCA). It's primarily used in two-component automotive clearcoats. Here's a breakdown of its key details:
Type: Acrylic polyol with 4.5% OH content, modified with sag control agent.
Solvent Composition: Solvent naphtha / xylene (76 / 24)
Specifications:
- Non-Volatiles: 58 - 62%
- Viscosity flowcurve (1 s^-1): 4.0 - 8.0 Pa.s
- Viscosity flowcurve (1000 s^-1): 0.90 - 1.6 Pa.s
- Amine content: Max. 6.0 mmol/kg
- SCA content: 2.2 - 2.8%
- Fineness: Max. 15 microns
Typical Properties:
- Density: 1.00 kg/dm³
- Flash point: 31°C
Technical Features:
- When combined with aliphatic polyisocyanates, SETALUX® 91767 VX-60 provides excellent anti-sagging effect, good appearance, adhesion, durability, chemical and petrol resistance, and excellent application properties.
Application: Mainly used in two-component automotive clearcoats.
Storage Conditions: Should be stored and transported in its original sealed containers at temperatures below 40°C, avoiding exposure to direct sunlight. Any inhomogeneity formed or viscosity build-up during transport or storage can be reversed using light stirring prior to use and does not affect product performance.
Shelf Life: Standard shelf life is 730 days from the date of manufacturing. The expiration date of a batch may be extended by allnex upon re-testing by QC.

EBECRYL® 246/20 HEMA

EBECRYL® 246/20 HEMA is a difunctional aliphatic urethane acrylate diluted in 20 parts of HEMA (2-hydroxyethyl methacrylate). It's commonly used in electron beam (EB) or ultraviolet light (UV) curing processes for coatings and inks. Here are the key details:
Introduction:
- EBECRYL® 246/20 HEMA does not contain intentionally added organic tin compounds, heavy metals, or quinones (though quinones may be present in some raw materials).
- Films cured by EB or UV exhibit excellent abrasion resistance, toughness, flexibility, and resistance to yellowing.
Performance Highlights:
- No intentionally added tin, heavy metals, or quinones.
- Light color and low odor.
- UV/EB cured products based on EBECRYL® 246/20 HEMA exhibit:
  - Excellent flexibility
  - Excellent non-yellowing
  - High scuff and abrasion resistance
  - Good exterior durability
Suggested Applications:
- Clear coatings for paper
- Clear coatings on flexible and semi-rigid plastics
- Silk screen inks
- Flexibilizer in solder resists
- Wood top coats
Typical Values:
- Brookfield viscosity at 25°C: ~30,000 mPa.s
- Gardner color: max. 1
Physical Properties:
- Density: 1.09 g/cm³
- Molecular weight: Theoretical 1600
- Functionality: Theoretical 2
- Polymer solids: 80% by weight
Viscosity Reduction:
- Can be diluted with various reactive monomers such as 1,6-hexanediol diacrylate (HDDA), tripropylene glycol diacrylate (TPGDA), trimethylolpropane triacrylate (TMPTA), oligotriacrylate (OTA 480), tetraethylene glycol diacrylate (TTEGDA), and octyl/decyl acrylate (ODA).
Storage and Handling:
- Avoid exposure to temperatures exceeding 40°C for prolonged periods or direct sunlight to prevent uncontrollable polymerization.
- Store in appropriate containers such as stainless steel, amber glass, or amber polyethylene.
- Use dry air to displace material removed from the container.
- Do not store for more than 2 years.
Precautions:
- The toxicological properties are not fully determined, but it can be expected to be eye and skin irritant and may cause sensitization or other allergic responses.
- Follow appropriate handling procedures and protective equipment as outlined in the Safety Data Sheet.
In summary, EBECRYL® 246/20 HEMA is a versatile material used in various UV/EB curable products, offering excellent performance properties and suitable for a range of applications in coatings and inks.

allnex HDDA

HDDA stands for Hexanediol diacrylate. It's a difunctional reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. Here's a breakdown of its key characteristics and applications:
Performance Highlights:
- Very low viscosity
- Low color
- Efficient reduction of oligomer viscosity
- UV/EB curable formulated products containing HDDA exhibit:
  - Improved elasticity
  - Improved weathering
  - Good cure response at low cross-link density
  - Improved adhesion
  - Good water resistance
Suggested Applications:
- Improved adhesion to plastics, metal, and glass
- Exterior durable coatings and inks
Specifications:
- Acid value: max. 0.4 mg KOH/g
- Appearance: Clear liquid
- Color: max. 40 Apha
- Residual solvent: max. 0.09 wt.%
- Viscosity at 25°C: 5 - 8 mPa.s
- Water content: max. 0.1 wt.%
Typical Physical Properties:
- Density at 25°C: 1.02 g/cm³
- Flash point (Setaflash): > 100°C
- Formula weight: 226
Typical Cured Properties:
- Tensile strength: 5080 psi (35 MPa)
- Elongation at break: 2%
- Young's modulus: 246500 psi (1700 MPa)
- Glass transition temperature: 48°C
Precautions: Before using HDDA, it's essential to refer to the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.
Storage and Handling: Care should be taken to avoid exposure to high-temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids, as they may cause uncontrollable polymerization of the product. Proper storage containers and procedures are recommended to prevent crystallization. Heating methods are suggested for removing crystallization.

EBECRYL® 230

EBECRYL® 230 is an aliphatic urethane diacrylate that offers several characteristics making it suitable for various applications. Here's an overview:
Introduction:
- EBECRYL® 230 is characterized by its light color and low viscosity.
- It cures via exposure to ultraviolet light (UV) or electron beam (EB), resulting in soft and flexible films that are resistant to yellowing.
- Often used as a modifier to improve the flexibility of finished formulations.
Performance Highlights:
- Light color and low viscosity.
- UV/EB cured products containing EBECRYL® 230 offer improved flexibility and are non-yellowing.
Suggested Applications:
- Suitable for use in formulated UV/EB curable products applied via various methods such as direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion, and spin coating methods, as well as offset and screen printing.
- Recommended for:
  - Increasing flexibility of UV/EB cured coatings and inks.
  - Laminating adhesives.
  - Coatings for plastic and metal.
  - Lithographic and screen inks.
Specifications:
- Appearance: Clear liquid.
- Color: Maximum 50 APHA.
- Viscosity at 25°C: 30,000 - 60,000 mPa.s.
Typical Physical Properties:
- Density at 25°C: 1.08 g/cm³.
- Functionality (theoretical): 2.
- Oligomer content: 100% by weight.
Typical Cured Properties:
- Tensile strength: 450 psi (3.0 MPa).
- Elongation at break: 127%.
- Young's modulus: 580 psi (4.0 MPa).
- Glass transition temperature: -39°C.
Viscosity Reduction:
- Reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA) can be used to reduce viscosity. Reactive diluents are preferred to reduce solvent emissions.
Precautions:
- Follow safety guidelines outlined in the Safety Data Sheet (SDS).
- Store in appropriate containers away from high temperatures, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Adequate ventilation is recommended during handling.
- Refer to the SDS for recommended storage temperature range.
EBECRYL® 230 offers versatility and performance suitable for various coating and ink applications, providing flexibility and resistance to yellowing. Proper handling and storage are essential to maintain its properties.

UVEKOL® S 15

UVEKOL® S 15 is a one-component acrylic resin designed specifically for the lamination of glass systems. When exposed to UV light for 20 minutes, it cures, producing laminates with excellent impact resistance. This product is suitable for use with various types of glass, including flat and bent, tempered, coated, and other varieties.
Physical Properties:
- Refractive Index: 1.4410 at 25°C
- Color: Less than 50 (APHA)
- Viscosity: 75 - 190 Höpler at 25°C
- Density: 0.998 g/cm³
- Shore A Hardness after Cure: 70 at 21°C
Application Procedure: The lamination process involves cleaning the glass panes to be laminated, joining them with a double-sided adhesive tape, leaving a small opening, then pumping UVEKOL® S 15 into the cavity between the panes. The resin is then cured in a UV oven for 20 minutes. This process does not require heating or pressure.
Properties of UVEKOL® S20 Based Glass Laminates:
- Safety Performance: Meets various standards including ANSI Z.97 and BS 6206 for impact resistance.
- Security Performance: Meets EN 356 standards for impact falling ball test and sharp and blunt impact test (axe test).
- Acoustic Performance: Provides sound deadening properties, offering sound reduction Rw - 35 dB and RA, route – 32 dBA.
- Accelerated Ageing: Shows excellent stability against heat, UV light, and humidity through various tests.
Precautions: UVEKOL® S 15 should be stored in a dry place away from heat sources at a temperature of 15 to 30°C. It has a shelf life of 6 months from the date of manufacture.
Packaging and Quality Certification: Available in plastic drums of 180 kg net weight and containers schütz of 1000 kg net weight. Manufacturing is certified ISO 9001 and ISO 14001.
Statutory Labeling: For statutory labeling information, refer to the Safety Data Sheet.
Overall, UVEKOL® S 15 offers a simple and effective solution for glass lamination with impressive impact resistance and other desirable properties.

allnex PC 1644 Defoamer

PC 1644™ Defoamer is a solution primarily composed of an acrylic polymer in a petroleum solvent, developed to provide enhanced defoaming performance compared to PC-1244 in non-aqueous organic fluids. It's a general-purpose defoamer, free of silicone, and characterized by very low odor.
Key points about PC 1644™ Defoamer:
1. Improved Performance: Offers superior foam control at lower usage levels compared to PC-1244, typically 10 to 20% lower.
2. Applications: Used in various applications including gear oils, specialty lubricants, shock absorber fluids, hydraulic fluids, turbine oils, and transmission oils.
3. Typical Use Levels: Range from 50 to 500 ppm (20 to 200 ppm active polymer). Optimum levels vary depending on the nature of the oil, requiring a concentration profile for each oil. Typically used at 200 to 250 ppm of solution (80 to 100 ppm active polymer).
4. Physical Properties:
  - Appearance: Clear, colorless to light yellow liquid
  - Refractive Index (nD25 @ 25 °C): 1.4380 - 1.4405
  - Non-Volatiles (%): 38 - 42
  - Viscosity (SUS @ 100 °F): 150 - 330
  - Specific Gravity @ 60 °F: 0.84 - 0.86
  - Color (APHA): 150 max
  - Flash Point (Pensky-Martens, closed cup): 144 °F (62 °C)
  - Brookfield Viscosity (cps @ 25 °C): 30 - 80
  - Solubility in water: Negligible
5. Shelf-Life: At temperatures up to 35 °C, storage stability in original containers amounts to at least 1460 days.
PC 1644™ Defoamer is available in various regions including Asia-Pacific, Europe/Africa, North America, and South America. It's important to follow the recommended guidelines for storage and handling provided in the technical datasheet.