Archives: Listings

SETALUX® D A 170 BA is a polyisocyanate cross-linking acrylic resin primarily used in combination with aliphatic polyisocyanates to formulate two-component polyurethane coatings. Here's a summary of its features, applications, and specifications:

Type:

• Polyisocyanate cross-linking acrylic resin
• Hydroxyl content: approximately 2.6% on solid resin

Uses:

• Formulation of two-component polyurethane coatings with good light-fastness and resistance to chalking

Form Supplied:

• Approximately 70% in butyl acetate

Specification:

• Non-volatile content: 70 ± 1%
• Viscosity at 23°C: 3750 ± 1000 mPa·s
• Acid value (supply form): 13 ± 2 mg KOH/g
• Hydroxyl content (supply form): 1.6 to 2.0%
• Hazen colour value: ≤ 50
• Water content: ≤ 0.1%

Other Data:

• Equivalent weight (supply form): approximately 945 g/eq
• Density at 20°C: approximately 1.02 g/cm³
• Flash point: approximately 25°C

Properties / Applications:

• Used in air- and force-drying topcoats and anti-corrosion coatings for steel in civil and hydraulic engineering applications
• Suitable for brushing, rolling, and airless spraying
• Offers good weather stability, resistance to water, washing solutions, and chemicals
• Stable up to approximately 150°C, but yellowing may occur at higher temperatures
• Can be used in anti-corrosion primers and primer surfacers for automotive refinish and transportation coating applications

Solubility / Thinnability:

• Can be thinned to a resin content of 30% using ketones, esters, ether esters, toluene, xylene, and solvent naphtha 100
• Solutions formed must be tested for their storage stability, and only PU grade solvents should be used

Compatibility:

• Compatible with various aliphatic polyisocyanates, including Desmodur N 75, N 3390, Z 4470 and L, and with SETALUX D A 450
• Also compatible with certain types of nitrocellulose chips and vinyl copolymers, but compatibility testing is advisable

Storage:

Stable for at least 730 days when stored in originally sealed containers at temperatures not exceeding 30°C

Labeling and REACH Applications:

• This product data sheet should be used in conjunction with the corresponding Safety Data Sheet for safety-relevant information
• Safety Data Sheets will be revised and distributed to reflect any updates in safety-relevant information

Overall, SETALUX® D A 170 BA offers versatility in formulating polyurethane coatings with excellent performance properties, making it suitable for various industrial and automotive applications. However, proper handling, storage, and compatibility testing are essential to ensure optimal results and safety.

UVEKOL® FR-C is a mono-component acrylic resin designed specifically for glass lamination applications. Here's an overview of its key features and applications:

Introduction:

• UVEKOL® FR-C is developed to provide safety impact resistance to fire-resistant ceramic glass laminates.
• It is cured under UV light for 20 minutes.

Application Procedure:

• The lamination process is straightforward and does not require heating or pressure.
• Glass panes are cleaned and joined with double-sided adhesive tape, leaving a small opening for filling.
• UVEKOL® FR-C is pumped into the cavity between the panes and cured in a UV oven.

Impact Properties:

• UVEKOL® FR-C interlayers offer good impact resistance, enabling laminates to pass pendulum tests for safety glass standards.
• Laminates with UVEKOL® FR-C meet requirements for CPSC 16CFR1201 highest category II or ANSI Z-97.1, class A - category II.

Ageing and Durability:

• UVEKOL® FR-C laminates resist heat, UV light, and humidity.
• They have been tested under various conditions, including temperature cycling, high-temperature exposure, and UV irradiation.

Packaging and Quality Certification:

• Available in polyethylene drums (180 l) and Schütz containers (1000 l).
• Manufacturing is certified ISO 9001 and ISO 14001.

Storage and Handling:

• Store in a dry place away from heat sources at temperatures between 15°C to 30°C.
• Shelf life is six months from the date of manufacture.

Statutory Labeling and Transport Regulation:

• Refer to the Safety Data Sheet for information on statutory labeling and transport regulations.

UVEKOL® FR-C offers a reliable solution for glass lamination, providing safety impact resistance and meeting stringent safety standards.

EBECRYL® 765 is a diluted acrylic polymer used primarily as a modifying oligomer in formulations for ultraviolet light (UV) or electron beam (EB) energy curing processes. Here are the key details about EBECRYL® 765:

Introduction:

• EBECRYL® 765 is a diluted acrylic polymer, consisting of 60% polymer and 40% by weight of a 1/1 ratio mixture of the reactive diluents 1,6-hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA).
• It is designed to enhance adhesion on difficult substrates when used in UV or EB curable formulations.

Performance Highlights:

• Characterized by moderate viscosity and a light color.
• UV cured products containing EBECRYL® 765 exhibit good adhesion to difficult substrates, intercoat adhesion, and flexibility.

Suggested Applications:

• Suitable for various application methods including direct or reverse roll, offset gravure, screen printing, and more.
• Recommended for silk screen inks, coatings on plastics, and adhesives and inks for difficult substrates such as untreated polyester, polypropylene, and polystyrene.

Typical Properties:

• Appearance: Clear liquid
• Color, Gardner: Less than 3
• Density at 25°C: 1.05 g/cm³
• Polymer Content: 60% by weight
• HDDA Content: 20% by weight
• TPGDA Content: 20% by weight
• Viscosity at 25°C: Approximately 20,000 mPa.s

Viscosity Reduction:

• EBECRYL® 765 can be further diluted with additional reactive monomers such as HDDA, TPGDA, DPGDA, OTA-480, or TMPEOTA to achieve desired viscosity levels.
• Reactive diluents are preferred for viscosity reduction as they become part of the coating or ink, reducing solvent emissions.

Precautions:

• Users should refer to the Safety Data Sheet (SDS) for information on handling precautions and recommended personal protective equipment.

Storage and Handling:

• Store EBECRYL® 765 in appropriate containers away from high temperature conditions, direct sunlight, and ignition sources.
• Use adequate ventilation and avoid exposure to oxidizing agents, alkalis, or acids.

EBECRYL® 765 is a versatile acrylic polymer designed to improve the performance of UV and EB curable formulations, particularly in achieving adhesion on challenging substrates.

SETALUX® 1192 SS-60 is an acrylic polyol with a 3.8% OH (hydroxyl) content calculated on non-volatiles, primarily used in the formulation of varnishes, clearcoats, and solid color systems for car repair (e.g., cars, trains, tram units) as well as industrial topcoats for big rolling stock. Here's a breakdown of its features and technical specifications:

Solvent Composition:

• Butyl acetate

Specifications:

• Non-Volatiles: 60 - 62%
• Viscosity (23°C at 100 s-1):
  • At 60%: 1.9 - 3.8 Pa.s
  • At 61%: 2.3 - 4.6 Pa.s
  • At 62%: 2.7 - 5.4 Pa.s
• Acid value (as such): 3.0 - 5.0 mg KOH/g
• Color APHA (Lico): Max. 35 APHA
• Appearance: Clear and clean

Typical Properties:

• Density: 1.03 kg/dm3
• Flash point: 24°C

Technical Features:

• In combination with aliphatic polyisocyanates: Provides very fast drying at 60°C and room temperature, excellent appearance, easy application, good outdoor durability, and good adhesion results on metallic base-coats. It also exhibits good yellowing resistance in accelerated weathering tests.

Application:

• Varnishes, clearcoats, and solid color systems for car repair (cars, trains, tram units, etc.).
• Industrial topcoats for big rolling stock.

Storage Conditions:

• Keep container tightly closed and dry in a cool, well-ventilated place.
• Keep away from heat, sparks, flame, and other sources of ignition.

Shelf Life:

• Standard shelf life is 720 days from the date of manufacturing, but it may be extended based upon retesting by allnex Quality Control.

Compatibility:

• It lists various acrylic polyols, short oil alkyds, and other materials with which it is compatible or not recommended for mixing.

Dilutability:

• It specifies the dilutability of SETALUX® 1192 SS-60 with different solvents.

This product offers a range of technical features suitable for various coating applications, particularly in automotive and industrial sectors, providing fast drying, excellent appearance, and good durability.

EBECRYL® 40 is a tetrafunctional polyether acrylate characterized by its low viscosity, mild odor, and light color. It is primarily used as a diluting reactive oligomer in ultraviolet light (UV) and electron beam (EB) cured coatings and inks. Here's a breakdown of its features and suggested applications:

Introduction:

• EBECRYL® 40 is a part of the ECOWISE™ CHOICE product range for selected applications, emphasizing its eco-friendly attributes.
• It offers fast cure response when formulated with acrylate oligomers, enhancing the hardness and solvent resistance of cured inks and coatings.
• Recommended for lithographic offset inks, overprint varnishes, and paper upgrading.

Performance Highlights:

• Light color.
• Low viscosity.
• Low odor.
• Good cure response.

Performance Properties of UV/EB Cured Products:

• High surface hardness.
• Good solvent resistance.
• Low residual odor.
• Reduced shrinkage.

Suggested Applications:

• Commonly used as a diluting reactive oligomer in UV/EB cured coatings and inks, typically ranging from 10% to 50% depending on the application.
• Particularly effective in lithographic inks and varnishes for adjusting viscosity while maintaining or improving cure response and physical properties.
• Recommended for offset inks, overprint varnishes, coatings on paper and plastics, paper upgrading, and reducing curl on flexible substrates.

Specifications:

• Appearance: Clear liquid
• Color, Gardner: max. 2
• Viscosity at 25°C: 110 - 210 mPa.s

Typical Physical Properties:

• Density, g/cm³ at 25°C: 1.15
• Flash point, Cleveland open cup, °C: > 100
• Functionality, theoretical: 4

Typical Cured Properties:

• Tensile strength: 5200 psi (36 MPa)
• Elongation at break: 4%
• Young’s modulus: 185000 psi (1276 MPa)
• Glass transition temperature: 48°C

Precautions:

• Before use, refer to the Safety Data Sheet (SDS) for hazard information, recommended personal protective equipment, and procedures.

Storage and Handling:

• Avoid exposure to high temperatures, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids to prevent uncontrollable polymerization.
• Store and handle in suitable containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers).
• Avoid procedures that remove or displace oxygen from the material.
• Use with adequate ventilation.
• Follow the recommended storage temperature range provided in the SDS.

EBECRYL® 40 provides significant benefits in UV/EB cured coatings and inks, offering improved cure response and enhanced properties while maintaining eco-friendly characteristics.