Archives: Listings

EBECRYL® 740/40 TP

EBECRYL® 740/40 TP is a full acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). Here's a summary of its key features and specifications from the technical datasheet:
Introduction:
- EBECRYL® 740/40TP is designed to provide improved adhesion to difficult substrates.
- It is characterized by its light color.
Performance Highlights:
- UV/EB cured products based on EBECRYL® 740/40TP exhibit flexibility, adhesion to difficult substrates, and good intercoat adhesion.
Suggested Applications:
- Silk screen inks and coatings on plastics.
- Adhesives and inks for difficult substrates like untreated polyester, polypropylene, and polystyrene.
- Adhesion promoting adhesives.
Typical Values:
- Höppler viscosity at 60°C: 6000 - 9000 mPa.s.
- Gardner color: Maximum 3.
Physical Properties:
- Density: 1.05 g/cm3.
- Polymer solids: 60% by weight.
- TPGDA content: 40% by weight.
Viscosity Reduction:
- EBECRYL® 740/40TP can be diluted with reactive monomers such as 1,6-hexanediol diacrylate (HDDA), trimethylolpropane triacrylate (TMPTA), and tripropyleneglycol diacrylate (TPGDA). The choice of reactive diluent(s) can influence properties like hardness and flexibility.
Storage and Handling:
- Avoid exposing radiation curable products to temperatures exceeding 40°C for prolonged periods or direct sunlight to prevent uncontrollable polymerization and heat generation.
- Store in suitable containers like stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers. Avoid storing under an oxygen-free atmosphere. Use dry air to displace material removed from the container. The material should not be stored for more than 2 years.
Precaution:
- The toxicological properties of the material haven't been fully determined. It can be expected to be an eye and skin irritant and may cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid contact with eyes and skin and inhalation of aerosols or vapors. Refer to the Safety Data Sheet for handling procedures and protective equipment.
Statutory Labeling:
- For statutory labeling information, refer to the Safety Data Sheet.

EBECRYL® 244

EBECRYL® 244 is an aliphatic urethane diacrylate diluted with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Here's a breakdown of its key features and specifications based on the technical datasheet:
Introduction:
- EBECRYL® 244 is characterized by its light color and good cure response.
- Films cured by ultraviolet light (UV) or an electron beam (EB) exhibit good flexibility, toughness, abrasion and water resistance, and resistance to yellowing.
Performance Highlights:
- Light color, crystalline viscous liquid.
- UV/EB cured products based on EBECRYL® 244 demonstrate good flexibility, toughness, excellent abrasion resistance, good water, thermal, and electrical resistance, and non-yellowing properties.
Suggested Applications:
- Flexible screen inks and coatings.
- Light stable coatings.
- Electrical insulation coatings.
- Coatings where minimal water absorption is desired (absorbs less than 1% water/24 hr. immersion).
Specifications:
- Appearance at 50°C: Clear liquid.
- Color (Gardner): Maximum 2.
- Viscosity at 60°C: 7000 - 9000 mPa.s.
Typical Physical Properties:
- Density at 25°C: 1.12 g/cm³.
- Functionality (theoretical): 2.
- Oligomer content: 90% by weight.
- HDDA content: 10% by weight.
Typical Cured Properties:
- Tensile strength: 3700 psi (26 MPa).
- Elongation at break: 60%.
Viscosity Reduction:
- Graph I demonstrates the viscosity reduction of EBECRYL® 244 with reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA).
- Reactive diluents are preferred for viscosity reduction as they become part of the coating upon UV/EB exposure, reducing solvent emissions.
Storage and Handling:
- Avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Store in suitable containers and avoid procedures that remove or displace oxygen from the material.
- Recommended storage temperature range can be found in the Safety Data Sheet (SDS).
Before use, it's essential to review the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.

SETAQUA® 6513

SETAQUA® 6513 is an acrylic polyol emulsion designed for use in durable, abrasion-resistant, and chemical-resistant two-component waterborne polyurethane paint systems. Here's a summary of its key features and specifications based on the technical datasheet:
Description:
- An acrylic polyol emulsion with 4.2% OH (calculated on non-volatiles).
- Solvent composition: Demineralized water / Dowanol PnP (96/4).
Specifications:
- Non-Volatiles: 43 - 45%
- Viscosity (23°C, 250 s-1): 0.010 - 1.0 Pa.s
- Acid value (as such): 6.0 - 8.2 mg KOH/g
- pH: 7.5 - 8.5
Typical Properties:
- Mechanical stability: OK
- Density: 1.04 kg/dm3
- Flash point: > 65°C
Technical Features:
- Suitable for durable, abrasion- and chemical-resistant two-component waterborne polyurethane paint systems.
- Does not contain butyl glycol.
Application:
- Industrial waterborne two-component, very high gloss varnishes and topcoats for drying at room temperature as well as drying at elevated temperatures.
- Used in waterborne two-component paint systems where butyl glycol is not allowed.
- Ideal for industrial applications requiring a high layer thickness without foaming.
Storage Conditions:
- Should not be stored at temperatures below 0°C or above 35°C.
- Avoid exposure to direct sunshine and prevent freezing.
Shelf Life:
- Standard shelf life is 180 days from the date of manufacturing, but may be extended based upon retesting by allnex Quality Control.

SETAQUA® ECO 2015

SETAQUA ECO 2015 is a pure acrylic emulsion designed for environmentally friendly broad wall paint applications. Here's a breakdown based on the technical datasheet:
Description:
- It's a fine particle size, adhesion promoted, pure acrylic emulsion.
- Does not contain ammonia, formaldehyde, or alkyl phenol ethoxylate.
- Features very low residual monomer levels, low odor, and film forms without the need for coalescents and solvents.
- Exhibits excellent thickener response.
Application:
- Developed for environmentally friendly broad wall paint applications requiring excellent film performance.
- Recommended for low-sheen coatings and flat paints, offering good scrub and stain resistance.
Typical Properties:
- Appearance: Milky white emulsion
- Solids content (wt %): 50
- pH (at 25°C): 8.0
- Viscosity (Brookfield RVT3/50): 700 cP
- MFFT (Minimum Film Formation Temperature): <0°C
- Specific Gravity: 1.04
- Particle size (median)
- Free Monomer (wt %): 0.025 max
- Particle Charge: Anionic
Storage:
- Should be stored under cover, away from direct sunlight, and avoiding extreme temperature changes.
- Sealed, unopened containers have a shelf life of 12 months from the date of manufacture under normal storage conditions (5 − 35°C).
- If stored for longer than 12 months, product must be rechecked for suitability.
Safety:
- Safety Data Sheet should be referred to before handling or use for safety precautions.

PHENODUR® PR 308/62MP

PHENODUR® PR 308/62MP is a curable, unplasticized phenolic resin delivered in 62% methoxy propanol solution. Here's an overview of the technical datasheet:
Type: Curable, unplasticized phenolic resin
Form of Delivery (F.O.D.): 62% in methoxy propanol (62MP)
Uses:
- Used as a coloring resin for gold lacquers and other solvent-borne systems.
Product Data (Determined per batch):
- Dynamic Viscosity (23°C): 1000 - 2250 mPa.s (DIN 53177)
- Non-Volatile Matter (1 h; 135°C; 2 g; n-butanol): 60 - 64% (DIN EN ISO 3251)
Physical Properties:
- Colour/Appearance: Dark brown (VLN 250)
- Density (20°C): 1.05 g/cm³ (DIN EN ISO 2811-2)
Dilutability:
- Can be diluted with various solvents, with some having unlimited dilutability and others having limited or substantial dilutability.
Compatibility:
- Shows compatibility with various other binders and epoxy resin types in different ratios.
Distinguishing Features:
- Technically comparable to PHENODUR® PR 307 but with a different chemical structure.
Processing:
- Suitable solvents and diluents include glycol ethers, diacetone alcohol, ketones, and aromatic hydrocarbons.
Properties and Uses:
- Used as a coloring agent for combinations of different PHENODUR® grades with high molecular weight epoxide resins and polyester resins.
Storage:
- Stable for at least 365 days at temperatures up to 25°C when packed in original containers. Expiration date may be extended after quality control testing.
U.S. Environmental Protection Agency restrictions and requirements:
- Subject to Significant New Use Rule (SNUR) issued by the U.S. Environmental Protection Agency (US EPA) and may also be subject to export notification under TSCA Sec. 12(b).
Safety and Handling:
- Safety Data Sheet (SDS) available for safety, health, and environmental data.

BECKOPOX™ EH 651/70X

BECKOPOX™ EH 651/70X is a polyamidoamine resin delivered in 70% xylene solution. Here are the details provided in the technical datasheet:
Type: Polyamidoamine
Form of Delivery (F.O.D.): 70% in xylene (70X)
H-equivalent weight:
- F.O.D.: 255 g/mol
- Solids: 178 g/mol
Special Properties:
- Used in combination with Beckopox EP 301 for solvent-based primers and coatings with long processing time, for mineral and metallic substrates.
Product Data (Determined per batch):
- Dynamic Viscosity (DIN EN ISO 3219): 550 - 1700 mPa.s (500 1/s; 23 °C)
- Amine Value (Reaction Resins) (DIN 16945 / 5.6): 155 - 185 mg KOH/g
- Iodine Colour Number (DIN 6162): <= 20
Suggested Uses and Processing:
- Used in combination with epoxy resins, both solvent-based and solvent-free, to give systems with long pot life.
- Cured films show good flexibility, adhesion, water resistance, and resistance to many chemicals.
- Preferably used in combination with xylene-based solid epoxy resins, such as Beckopox EP 301, for metal coatings and anti-corrosion primers.
Mixing Ratio and Potlife:
- A blend of 100 g Beckopox EP 301/75X and 40 g Beckopox EH 651/70X starts to gel at 23 °C after approx. 8 hours.
Storage:
- Stable for at least 365 days at temperatures up to 25 °C when packed in original containers.
- May show green coloration.
Distinguishing Features:
- Beckopox EH 651 provides the longest processing time of the polyamidoamines in the Beckopox range.
Safety at Work and Environmental Protection:
- When handling and processing epoxy resins and hardeners, observe the rules and regulations established by local authorities. A Material Safety Data Sheet is available on request.

SETALUX® 433-150

SETALUX® 433-150 is an acrylic polyol with 2.0% OH (calculated on non-volatiles). Here are the details provided in the technical datasheet:
Solvent Composition:
- Xylene / Butyl acetate = 25 / 25
Specifications:
- Non-Volatiles: 48 - 52 %
- Acid value (as such): 2 - 6 mg KOH/g
- Viscosity (23°C at 50 s-1): 3.5 - 5.5 Pa.s
- Colour APHA (Lico): Max. 50 APHA
- Appearance: Clear, free of extraneous matter
Typical Properties:
- Density: 1.01 kg/dm3
- Flash point: 25 °C
Technical Features:
- Excellent fast-drying
- Very good through hardening
- Good stackability
- Good compatibility with polyisocyanates
Application:
- Two-component polyurethane lacquers and varnishes (also for wood)
Storage Conditions:
- Storage should be under cover, out of direct sunlight, and avoiding extreme temperature changes.
- Under normal storage conditions (5 - 35°C, away from extremes), sealed, unopened containers of this material would have a shelf life of 24 months from the date of manufacture. If it is stored for longer than 24 months, it is recommended that the product is rechecked for suitability in the intended application.

SETALUX® 57-7205

SETALUX® 57-7205 is a HAPs-free acetoacetate functional acrylic resin designed for use in combination with SETALUX 10-1440 in the isocyanate-free "Ketac" primer system. Here's an overview of its characteristics and applications:
Introduction:
- Type: Acetoacetate functional acrylic resin
- It is part of the isocyanate-free "Ketac" primer system, providing fast drying, good sanding, excellent adhesion to various substrates, and superior topcoat hold-out.
Form of Delivery (F.O.D.):
- 45% non-volatile in parachlorobenzotrifluoride
Product Data:
- Non-Volatile, by wt: 45.0 ± 1.0 %
- Viscosity (77⁰ F): Z – Z3 Gardner – Holdt
- Acid value: 2 maximum mg KOH/g
- Color: 100 maximum APHA
- Appearance: Clean, clear, and free from extraneous matter
- Density: 10.50 ± 0.10 lbs/gal
- Non-volatiles, by vol: 48.2%
- Flash Point: 116⁰ F Setaflash
- Acetoacetate equiv. wt: 1200 on n.v.
Performance Highlights:
- Extremely fast air drying
- Excellent filling properties and good sagging resistance
- Easy wet and dry sandability after 1 hr air dry, very short flash time between coats
- Extremely good adhesion on different substrates
Suggested Uses:
- Non-isocyanate Car Refinish and fleet primer applications
- Non-isocyanate primers for plastics
- Non-isocyanate industrial primer systems for metal
Storage:
- Stable for 3 years at temperatures up to 100°F when stored in the original sealed containers.
Precautions:
- Refer to the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.
- Avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Use adequate ventilation during handling.
- Wash thoroughly after handling.
- Keep the container tightly closed.
For further details and specific recommendations, consult the Safety Data Sheet for SETALUX 57-7205.

EBECRYL® 526

EBECRYL® 526 is a chlorine-free polyester resin diluted with TMPTA (Trimethylolpropane triacrylate). Here's an overview of its characteristics and applications:
Introduction:
- EBECRYL® 526 is designed to provide good adhesion to plastic substrates.
- Cured films result in good hardness.
Performance Highlights:
- Light color
- Chlorine-free
- Good adhesion-scratch compromise
- Good adhesion to plastic substrates such as PE, PP, PET, PC, and PVC
Suggested Applications:
- Inks and Over Print Varnishes for plastic and metallic substrates
- Can be applied by lithography, flexography, dry offset, screen, gravure, direct or reverse roll, and curtain coating methods.
Typical Values:
- Appearance: Liquid
- Density: 1.1 g/cm³
- Viscosity at 25°C: ± 100,000 mPa.s
- Viscosity at 60°C: ± 1,900 mPa.s
- Color, APHA: < 200
- Acid value, mg KOH/g: < 30
- Hydroxyl value, mg KOH/g: < 40
Viscosity Reduction:
- Can be diluted with reactive monomers such as HDDA, TMPTA, TPGDA, and OTA 480. The specific diluents used influence properties such as odor, adhesion, hardness, and flexibility.
Storage and Handling:
- Avoid exposure to temperatures exceeding 40°C for prolonged periods or direct sunlight to prevent uncontrollable polymerization.
- Use appropriate containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers).
- Store in a well-ventilated area. Do not store under an oxygen-free atmosphere. Use dry air to displace material removed from the container.
- Shelf life: Should not be stored for more than 2 years after the production date.
Safety Precautions:
- Toxicological properties are not fully determined. Products of this type can be expected to be eye and skin irritants and may cause sensitization or other allergic responses.
- Take appropriate precautions to avoid contact and inhalation. Consult the Safety Data Sheet for detailed handling procedures and protective equipment.
For further details, refer to the Safety Data Sheet for EBECRYL® 526.

EBECRYL® 1608

EBECRYL® 1608 is a diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate (OTA 480). Here's an overview of its characteristics and applications:
Introduction:
- EBECRYL® 1608 is characterized by its low odor, light color, low irritancy, and very fast cure response.
- Cured films exhibit high surface hardness and gloss, low residual odor, and excellent solvent resistance typical of epoxy resins.
Performance Highlights:
- Light color
- Fast cure response
- Low irritancy
- High surface hardness
- Very high gloss
- Excellent solvent resistance
- Low residual odor
Suggested Applications:
- Overprint varnishes
- Lithographic and screen inks and varnishes
- Coatings on wood, cardboard, chipboard, paper, and rigid plastics
- Paper upgrading
- Coatings where low residual odor is required
Typical Values:
- Höppler viscosity at 60°C: 1000 mPa.s
- Gardner color max: 2
- Acid value max: 2 mg KOH/g
Physical Properties:
- Density: 1.17 g/cm³
- Molecular weight (theoretical): 500
- Functionality (theoretical): 2
- Polymer solids: 85% by weight
- OTA 480: 15% by weight
Typical Cured Properties:
- Tensile elongation: 4 MPa
- Tensile strength: 107%
- Glass transition temperature: 67°C
Storage and Handling Precautions:
- Avoid exposing radiation curable products to temperatures exceeding 40°C for prolonged periods or direct sunlight.
- Use appropriate containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers).
- Store for no more than 2 years after the production date.
Safety Precautions:
- Toxicological properties are not fully determined; eye and skin irritations and sensitization are potential risks.
- Handle with appropriate precautions to avoid contact and inhalation.
- Consult the Safety Data Sheet for detailed handling procedures and protective equipment.
For further details, refer to the Safety Data Sheet for EBECRYL® 1608.