Archives: Listings

SETALUX® XCS 1518 BA-45

SETALUX® XCS 1518 BA-45 is an acrylic resin designed for use on polypropylene (PP) substrates. It's specifically formulated for applications such as primers or metallic monocoats (1K and 2K systems). Here are some key points from the technical datasheet:
1. Type: Acrylic resin with 0.8% OH (hydroxyl) on non-volatiles.
2. Solvent Composition: Primarily butyl acetate.
3. Technical Features:
  - Suitable for primers or monocoats on PP substrates.
  - Aromatic solvent-free.
  - Exhibits very good adhesion on PP even without treatment.
  - Good water resistance.
  - Offers good storage stability at low temperatures.
4. Dilutability: The resin is soluble in acetate solvents (e.g., butyl acetate, butylglycol acetate, etc.), aromatics (e.g., xylene, Solvesso 100, etc.), and turpentine (e.g., Turpentine 45).
5. Package and Store: Recommended storage temperature is up to 35°C. Storage stability in original containers is at least 365 days. If stored for longer, it's advised to recheck for suitability.
6. Disclaimer: The datasheet emphasizes that the product is for trial purposes and deviations may occur during commercial scale manufacturing. Users are advised to perform their own tests to determine suitability for specific purposes.
Overall, it's a specialized acrylic resin tailored for coating applications on polypropylene substrates, offering various technical benefits such as adhesion and water resistance.

SETALUX® 10-6266

SETALUX® 10-6266 is a low viscosity rheology control agent primarily used in clear coats for various applications such as OEM and plastic coatings. It enhances the sag resistance of coatings, meaning it helps prevent dripping or running of the coating when applied vertically, while also improving appearance qualities like DOI (distinctness of image), orange peel effect, and clarity.
Here are some key points about SETALUX® 10-6266:
1. Type: Rheology Control Agent (RCA)
2. Delivery: Typically delivered as 45.0% non-volatile in methyl n-amyl ketone / aromatic 100 (70 / 30 pbw)
3. Performance Highlights:
  - Excellent balance of sag resistance and leveling
  - Enhances appearance properties like DOI, orange peel, and clarity
  - Maintains performance under high shear conditions
  - Simplifies paint manufacturing process
  - Exhibits good outdoor durability, hardness, and scratch resistance
4. Suggested Uses: Suitable for OEM and plastic clear coats and base coats, as well as 1K bake and 2K coatings.
5. Storage: Stable for up to 2 years at temperatures up to 100°F in original containers with agitation.
6. Precautions: Users are advised to consult the Safety Data Sheet (SDS) for information on handling hazards and recommended protective measures.
7. Storage and Handling: Should be stored away from high temperatures, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids. Containers should be made of suitable materials such as stainless steel, amber glass, or amber polyethylene. Adequate ventilation is necessary during use, and thorough washing after handling is recommended. Filtering with a 5 µm filter prior to use is strongly recommended to maintain product cleanliness without compromising performance.
In summary, SETALUX® 10-6266 is a specialized additive designed to improve the performance and appearance of coatings, particularly clear coats, by enhancing sag resistance and overall visual quality.

EBECRYL® 3503

EBECRYL® 3503 is a modified bisphenol A epoxy diacrylate primarily used in ultraviolet light (UV) or electron beam (EB) curable formulations. Here's a breakdown of its key features, performance highlights, suggested applications, specifications, and precautions:
Introduction:
- EBECRYL® 3503 is essentially a modified diacrylate ester of a bisphenol A-based epoxy resin diluted with a reactive diluent called propoxylated glycerol triacrylate (OTA-480) at approximately 20% by weight.
- It's designed for use in UV or EB curable formulations, characterized by its light color, high reactivity to UV/EB, and good wetting properties compared to unmodified epoxy acrylates.
Performance Highlights:
- Light color and fast cure response.
- Good wetting of pigments, matting agents, and substrates.
- UV/EB cured properties include high surface hardness, gloss, chemical resistance, and water resistance.
Suggested Applications:
- Coatings for paper, rigid plastics (such as polycarbonate), and metal.
- Wood fillers and sealers.
- Pigmented coatings.
- Low gloss overprint varnishes.
Specifications:
- Acid value: Maximum 3 mg KOH/g.
- Appearance at elevated temperature: Clear liquid.
- Color: Maximum Gardner 2.0.
- Epoxy content: Maximum 0.5%.
- Viscosity at 60°C: 850 - 1150 mPa.s.
Typical Physical Properties:
- Density at 25°C: 1.16 g/ml.
- Functionality: Theoretical 2.
- Oligomer content: Approximately 80% by weight.
- OTA-480 content: Approximately 20% by weight.
Typical Cured Properties:
- Tensile strength: 10,300 psi (71 MPa).
- Elongation at break: 3.1%.
- Young’s modulus: 470,000 psi (3241 MPa).
Precautions:
- Handle according to the Safety Data Sheet (SDS) guidelines, ensuring proper personal protective equipment and procedures.
- Store away from high temperatures, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids to prevent uncontrollable polymerization.
- Use stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers for storage.
- Avoid procedures that remove or displace oxygen from the material.
- Keep the container tightly closed and use with adequate ventilation.

EBECRYL® 571

EBECRYL® 571 is a diluted polyester oligomer specially designed for flexo printed shrink sleeve applications. Here's a summary of its technical datasheet:
Introduction:
- EBECRYL® 571 is formulated for use in flexo printed shrink sleeve applications.
- It's a modified polyester resin diluted with 40% of dipropylene glycol diacrylate (DPGDA) and exhibits good pigment wetting properties.
Performance Highlights:
- Good pigment wetting.
- UV/EB cured formulations based on EBECRYL® 571 demonstrate:
  - Good adhesion on plastics like PVC, PET-G, and OPS.
  - High flexibility.
  - Good printability.
  - Excellent wrinkle resistance.
Typical Values:
- Dynamic viscosity at 25°C: ± 9000 mPa.s
- Colour, Gardner max.: 3
- Density: 1.14 g/cm3
- Polymer solids, % by weight: 60
- DPGDA, % by weight: 40
Typical Cured Properties:
- Tensile strength: 1160 psi (8 MPa)
- Tensile elongation: ~1%
- Young Modulus: 80000 MPa (550)
- Glass transition temperature (Tg): 24°C
- Surface tension: 39 dynes/cm
- Refractive index @ 25°C: 1.5069
Viscosity Reduction:
- EBECRYL® 571 can be further diluted with reactive monomers such as DPGDA, 1,6-hexanediol diacrylate (HDDA), tripropylene glycol diacrylate (TPGDA), trimethylolpropane triacrylate (TMPTA), EBECRYL® 160, or EBECRYL® 40.
Storage and Handling:
- Avoid exposing radiation curable products to temperatures exceeding 40°C for prolonged periods or direct sunlight to prevent uncontrollable polymerization.
- Store in appropriate containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers) and avoid storing under an oxygen-free atmosphere.
- Use dry air to displace material removed from the container.
- Shelf life: Not recommended to store for more than 2 years.
Precautions:
- Toxicological properties of this material are not fully determined. Expect it to be eye and skin irritants with the potential to cause sensitization or other allergic responses.
- Take appropriate precautions to avoid contact with eyes and skin, and inhalation of aerosols or vapours containing this product.
Refer to the Safety Data Sheet for further details on handling procedures and protective equipment.

EBECRYL® 3702

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate primarily used in UV and EB cured coatings. Here's a breakdown of its technical datasheet:
Introduction:
- EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate known for its outstanding flow and leveling properties, as well as excellent pigment wetting properties.
- Cured films exhibit high gloss, improved water resistance, and good chemical resistance.
Performance Highlights:
- Low odor, excellent pigment wetting, and good flow and leveling.
- UV/EB cured products have good chemical and water resistance, high gloss, and greater flexibility than standard bisphenol A epoxy acrylates.
Suggested Applications:
- Suitable for clear coatings for paper, overprint varnishes, lithographic ink vehicles, metal decorating inks and clear coatings, screen ink vehicles, and coatings for rigid and flexible plastics.
Specifications:
- Acid value: max. 3 mg KOH/g
- Appearance: Clear liquid
- Color, Gardner max.: 6
- Epoxy content, % max.: 0.27
- Viscosity, 65.5°C, mPa.s: 1600 - 2800
Typical Physical Properties:
- Density, g/cm³ at 25°C: 1.14
- Functionality, theoretical: 2
- Oligomer, % by weight: 100
Typical Cured Properties:
- Tensile strength, psi (MPa): 9500 (66)
- Elongation at break, %: 10
- Glass transition temperature, °C: 56
Viscosity Reduction:
- Can be reduced with reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA).
Storage and Handling:
- Avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids to prevent uncontrollable polymerization.
- Store in appropriate containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers) and avoid storing under an oxygen-free atmosphere.
- Use with adequate ventilation and follow recommended storage temperature ranges.
Before using EBECRYL® 3702, refer to the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and handling procedures.

EBECRYL® 600/35 OT

EBECRYL® 600/35 OT is an epoxy acrylate oligomer, primarily used in ultraviolet light (UV) and electron beam (EB) cured coatings. Here's a summary of its technical datasheet:
Introduction:
- EBECRYL® 600/35 OT is a diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). It is characterized by low odor, light color, low irritancy, and fast cure response.
Performance Highlights:
- Fast cure response, low irritancy, and light color.
- UV/EB cured products exhibit high surface hardness, high gloss, excellent solvent resistance, and low residual odor.
Suggested Applications:
- Suitable for overprint varnishes, screen inks and varnishes, coatings on wood, cardboard, chipboard, rigid plastics, and paper upgrading.
- Ideal for coatings where low residual odor is required.
Physical Properties:
- Höppler viscosity at 25°C: ± 11500 mPa.s
- Color, Gardner max: 2
- Acid value, mg KOH/g max: 2
- Density, g/cm3: 1.15
- Molecular weight, theoretical: 500
- Functionality, theoretical: 2
- Polymer solids, % by weight: 65
- OTA 480, % by weight: 35
Viscosity Reduction:
- Can be diluted with reactive monomers such as oligotriacrylate (OTA 480), 1,6-hexanediol diacrylate (HDDA), trimethylolpropane triacrylate (TMPTA), tripropylene glycol diacrylate (TPGDA), and octyl/decyl acrylate (ODA).
Storage and Handling:
- Avoid exposure to temperatures exceeding 40°C or direct sunlight to prevent uncontrollable polymerization.
- Store in appropriate containers (stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers) and avoid storing under an oxygen-free atmosphere.
- Shelf life is not more than 2 years after the production date.
Precaution:
- Toxicological properties are not fully determined; appropriate precautions should be taken to avoid eye and skin contact, as well as inhalation of aerosols or vapors.
- Consult the Safety Data Sheet for detailed handling procedures and protective equipment.
EBECRYL® 600/35 OT offers a range of properties suitable for various coating applications, particularly where fast curing, high gloss, and low residual odor are desired.

ADDITOL® P 824

ADDITOL® P 824 is a flow promoter masterbatch primarily used in the manufacturing of powder coatings. Here are the key details from the technical datasheet:
General Description:
- ADDITOL® P 824 is a 15% active flow promoter masterbatch based on an outdoor-resistant hydroxylated polyester matrix. It enhances gloss and is compatible with nearly all powder coating systems.
Product Specification:
- Appearance: Pale granules
- Brookfield Viscosity @ 200°C: 800-2000 mPa.s
- Hydroxyl value: 40-50 mg KOH/g
- Acid value: Maximum 8 mg KOH/g
Other Properties:
- Glass transition temperature (°C): Approximately 49°C
Shelf Life:
- Under normal storage conditions (≤25°C), the shelf life of the resin is 24 months from the date of manufacturing. For products older than 24 months, it is recommended to check the acid value and viscosity annually.
Safety & Environmental Protection:
- For safety and environmental information, refer to the Material Safety Data Sheet.
This flow promoter masterbatch is designed to improve the flow and gloss characteristics of powder coatings and is suitable for a wide range of powder coating systems.

SETALUX® 27-1590

SETALUX® 27-1590 is a fast-curing hydroxyl-functional acrylic oligomer designed for use in 2K high solids air dry, force dry, and bake applications. Here's a breakdown of its key features and specifications from the technical datasheet:
Introduction:
- SETALUX 27-1590 exhibits excellent overall performance properties, including fast cure, good pot-life, high solids content, and low VOC formulation potential. It offers excellent flow and leveling, good flexibility, and early water resistance.
Type:
- Acrylic polyol
Form of Delivery (F.O.D.):
- 80% non-volatile in methyl n-amyl ketone
Product Data:
- Non-Volatile content: 80 ± 1.0% by weight
- Viscosity at 73°F: Z2 – Z4 Gardner Holdt
- Acid value, on solids: Maximum 4 mg KOH/g
- Color: Maximum 100 APHA
- Appearance: Clean, clear, and free from extraneous matter
- Density: 8.58 ± 0.10 lbs/gal
- Flash Point: 102°F Setaflash
- Non-volatile content, by volume: 74.8%
- HEW (hydroxyl equivalent weight) on non-volatile: 400
- Reduced viscosity: N – R Gardner – Holdt @ 70% in MAK
Performance Highlights:
- Ability to formulate low VOC coatings (2.5 – 3.5 lbs/gal)
- Fast cure with good pot-life
- Excellent flow, DOI (distinctness of image), and overall appearance properties
- Very good exterior durability and gloss retention
- Acts as a modifier to reduce VOC in higher VOC systems
Suggested Uses:
- Topcoats and single coat enamels for VR (vehicle refinishing) and industrial applications
- Maintenance and marine coatings
- Coatings for metal and plastics
Storage:
- Stable for 3 years at temperatures up to 100°F when stored in original sealed containers.
Curing with Polyisocyanates:
- Formula provided to calculate the quantity of polyisocyanate needed for crosslinking based on 100% conversion of reactive groups.
Precautions:
- Refer to the Safety Data Sheet (SDS) for information on identified hazards, recommended personal protective equipment, and procedures.
- Avoid exposure to high-temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids.
- Store and handle in suitable containers such as stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers.
- Wash thoroughly after handling. Keep the container tightly closed. Use with adequate ventilation.
This product is suitable for various coating applications, providing excellent performance and flexibility in formulation.

EBECRYL® 892

EBECRYL® 892 is a tetra-functional polyester acrylate designed for use in UV and EB (electron beam) cured inks and coatings. Here's a breakdown of its key features and specifications from the technical datasheet:
Introduction:
- EBECRYL® 892 is a light-colored, low-viscosity tetra-functional acrylated oligomer. It offers a fast cure response when combined with other oligomers and cured via UV or EB. Additionally, it enhances the hardness and solvent resistance of cured inks and coatings.
Performance Highlights:
- Light color and low viscosity.
- Good cure response.
- UV/EB cured products exhibit high surface hardness and good solvent resistance.
Suggested Applications:
- Suitable for lithographic, screen, gravure, flexo, direct or reverse roll, and curtain coating methods.
- Recommended for use in offset and flexo inks as a reactive oligomer, overprint varnishes, coatings on paper, plastics, cardboard, and paper upgrading.
Typical Values:
- Cone and plate viscosity at 25°C: Approximately 140 mPa·s
- Gardner color: Maximum 2
Physical Properties:
- Density: 1.15 g/cm³
- Theoretical functionality: 4
Storage and Handling:
- Avoid exposure to temperatures exceeding 40°C for prolonged periods or direct sunlight to prevent uncontrollable polymerization.
- Store in suitable containers such as stainless steel, amber glass, amber polyethylene, or baked phenolic lined containers.
- Do not store under an oxygen-free atmosphere.
- Use dry air to displace material removed from the container.
- Shelf life: Should not be stored for more than 2 years.
Precautions:
- The toxicological properties of this material have not been fully determined.
- Products of this type can be expected to be eye and skin irritants and have the potential to cause sensitization or other allergic responses.
- Take appropriate precautions to avoid eye and skin contact and inhalation of aerosols or vapors.
- Refer to the Safety Data Sheet for detailed handling procedures and recommended protective equipment.
Statutory Labeling:
- For statutory labeling information, refer to the Safety Data Sheet.

EBECRYL® 8405

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted with 20% by weight of the reactive diluent 1,6-hexanediol diacrylate (HDDA). Here's a breakdown of its key features and specifications from the technical datasheet:
Introduction:
- EBECRYL® 8405 offers excellent abrasion resistance, flexibility, adhesion, and exterior durability when cured by ultraviolet light (UV) or electron beam (EB).
Performance Highlights:
- Light color and low odor.
- UV/EB cured products exhibit excellent abrasion resistance, toughness, flexibility, good adhesion, and non-yellowing properties.
Suggested Applications:
- Automotive OEM or re-finish coatings.
- Coatings for wood and plastic requiring excellent exterior durability.
- Metal coatings.
- Post-formable coatings for metal tube and conduit.
- Optical coatings.
- Exterior durable coatings.
Viscosity Reduction:
- EBECRYL® 8405 can be diluted with reactive monomers such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), neopentyl glycol propoxylate diacrylate (NPG(PO)2DA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). Reactive diluents are preferred for viscosity reduction as they are fully converted during UV/EB exposure, reducing solvent emissions.
Specifications:
- Appearance: Clear liquid
- Gardner color: Maximum 2
- NCO content: Maximum 0.2%
- Viscosity at 60°C: 3000 - 6000 mPa·s
Physical Properties:
- Density: 1.13 g/ml at 25°C
- Theoretical functionality: 4
- Oligomer content: 80% by weight
- HDDA content: 20% by weight
Typical Cured Properties:
- Tensile strength: 3900 psi (27 MPa)
- Elongation at break: 25%
- Young’s modulus: 92000 psi (634 MPa)
- Glass transition temperature: 30°C
Storage and Handling:
- Avoid exposure to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis, or acids to prevent uncontrollable polymerization. Store in suitable containers and avoid oxygen-free atmospheres. Wash thoroughly after handling and keep the container tightly closed. Use with adequate ventilation. Refer to the Safety Data Sheet for recommended storage temperature range.
Precautions:
- Before use, refer to the Safety Data Sheet for information on hazards and recommended personal protective equipment and procedures.