Archives: Listings

Liocrylam 912 is an aqueous pure acrylic emulsion, free from solvents and plasticizers. Here's a breakdown:

Characteristics:

• Aqueous pure acrylic emulsion.
• Solvent- and plasticiser-free.

Supplied as:

• 50% in water.

Properties:

• Non-volatile content: 50 +/- 1% (as supplied).
• Viscosity in mPas: 100-300 (as supplied).
• pH-value: 7.5-8.5 (as supplied).
• Minimum film formation temperature in °C: Approximately 17.
• Density in g/cm³: Approximately 1.05.
• Emulsifier system: Anionic.

Properties and fields of use:

• General-purpose emulsion for manufacturing matt to silk-finish emulsion paints and wood varnishes for interior and exterior coatings.
• Exhibits excellent adhesion to old alkyd resin coats exposed to moisture.
• Glossy paints characterized by good stability, leveling, resistance to light, and blocking resistance.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• It is preserved for storage and does not contain free formaldehyde or formaldehyde-releasing products.

Liocrylam 907 is an aqueous, self-crosslinking pure acrylic emulsion characterized by fine particle size and being solvent- and plasticizer-free. Here are the details:

Characteristics:

• Aqueous, self-crosslinking pure acrylic emulsion with fine particle size.
• Solvent- and plasticizer-free.

Supplied as:

• 42.5% in water.

Properties:

• Non-volatile content: 42.5 +/- 1% (as supplied).
• Viscosity in mPas: Less than 300 (as supplied).
• pH-value: 6.5-8.0 (as supplied).
• Minimum film-forming temperature in °C: Less than 5.
• Density (g/cm³): Approximately 1.05.
• Emulsifier system: Anionic.

Properties and fields of use:

• Suitable for solvent-free interior and exterior coatings.
• Exhibits good blocking resistance, good flow, high gloss, and good yellowing resistance.
• Films of the emulsion are clear, tough, resilient, light-resistant, and display good resistance to water, ethanol, and alkali.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. Additionally, it does not contain alkyl phenol ethoxylates (APEO’s).

Liocrylam 903 (formerly known as DRR 2124) is an aqueous modified pure acrylic emulsion, supplied as 45% in water. Here's an overview:

Characteristics:

• Aqueous modified pure acrylic emulsion.

Supplied as:

• 45% in water.

Properties:

• Non-volatile content: 45 +/- 1% (as supplied).
• Viscosity in mPas: 20-500 (as supplied).
• pH-value: 7.0-8.5 (as supplied).
• Minimum film-forming temperature in °C: Less than 5.
• Density in g/cm³: Approximately 1.03.
• Organic solvents: 1.4% (Dipropylenglycole dimethylether).

Properties and fields of use:

• Particularly suitable for formulations for clear coats, varnishes, and glossy paints for indoor and outdoor use.
• Miscible in all proportions with suitable polyurethane dispersions.
• The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. It also does not contain alkyl phenol ethoxylates (APEO’s).

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.

Liocrylam 483 (formerly known as DRR 1384) is an aqueous pure acrylic emulsion, free from solvents and plasticizers. Here's an overview:

Characteristics:

• Aqueous pure acrylic emulsion.
• Solvent and plasticizer-free.

Supplied as:

• 50% in water.

Properties:

• Non-volatile content: 50 +/- 1% (as supplied).
• Viscosity in mPas: 20-500 (as supplied).
• pH-value: 6.5-8.5 (as supplied).
• Minimum film-forming temperature in °C: Less than 3.
• Density in g/cm³: Approximately 1.03.
• Theoretical OH value: Approximately 50.

Properties and fields of use:

• Melamine or polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA.
• The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. It also does not contain alkyl phenol ethoxylates (APEO’s).

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.

Liocrylam 432 is an aqueous pure acrylic emulsion characterized by its fine-particle size and being solvent- and plasticizer-free. Here are the details:

Characteristics:

• Aqueous pure acrylic emulsion.
• Fine-particle size.
• Solvent- and plasticizer-free.

Supplied as:

• 46% in water.

Properties:

• Non-volatile content: 46 +/- 1% (as supplied).
• Viscosity in mPas: Less than 1,500 (as supplied).
• pH-value: 7.5-9.0 (as supplied).
• Minimum film-forming temperature in °C: Approximately 5.
• Density in g/cm³: Approximately 1.05.
• Emulsifier system: Anionic.

Properties and fields of use:

• Suitable for the formulation of primer coats with good wet adhesion.
• Used in pigmented matt and silk interior and exterior paints.
• Can be used as an adherend surface for substrates that are difficult to wet (e.g., terrazzo tiles), either alone or mixed with cement.
• Exhibits alkali stability, increased water stability, very good wet adhesion, shear stability, and good stamp adhesion.
• Films of the binder display good tensile strength and elasticity.

Storage:

• Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.

Note: The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. It also does not contain alkyl phenol ethoxylates (APEO’s).

Liocryl XAM 5134 is a provisional technical data sheet for an aqueous, self-crosslinking pure acrylic emulsion. Here are the details:

Characteristics:

• Aqueous, self-crosslinking pure acrylic emulsion.
• Solvent- and plasticiser-free.

Properties:

• Non-volatile content: 40 +/- 1% (as supplied).
• Viscosity in mPas: 20 - 500 (as supplied).
• pH-value: 7.5 - 8.5 (as supplied).
• Minimum film-forming temperature in °C: Approximately 33.
• Density in g/cm³: Approximately 1.03.

Properties and Fields of Use:

• Suitable for formulating aqueous 1-pack parquet and furniture varnishes.
• Coatings based on Liocryl XAM 5134 enhance grain on wood and exhibit high chemical and blocking resistance.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers.
• It should be protected from frost and kept away from direct sunlight, ideally stored at temperatures ranging from +5 to +25°C.
• The emulsion is preserved for storage and does not contain formaldehyde or formaldehyde-releasing products. Additionally, it does not contain alkyl phenol ethoxylates (APEOs).

Liocrylam 982 is an aqueous pure acrylic emulsion typically supplied as 50% in water. Here's a breakdown of its characteristics, properties, and uses:

Characteristics:

• Aqueous pure acrylic emulsion.

Properties:

• Non-volatile content: 50 +/- 1% (as supplied).
• Viscosity in mPas: 20-500 (as supplied).
• pH-value: 7.0-8.0 (as supplied).
• Minimum film forming temperature in °C: > 80.
• Density in g/cm³: Approximately 1.07.

Properties and Fields of Use:

• Recommended for formulating paints for plastic components such as hi-fi cabinets.
• Offers excellent chemical resistance.
• The emulsion is preserved for storage and does not contain plasticizers, formaldehyde, or formaldehyde-releasing products.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers.
• It should be protected from frost and kept away from direct sunlight, ideally stored at temperatures ranging from +5 to +25°C.