Archives: Listings

Liocryl XAM 2827 is an aqueous, self-crosslinking pure acrylic emulsion with specific properties and uses. Here are the details:

• Characteristics: Aqueous, self-crosslinking pure acrylic emulsion, solvent- and plasticizer-free.
• Supplied as: 42% in water.
• Properties:
  • Non-volatile content: 42.0 +/- 1% (as supplied).
  • Viscosity in mPas: 20-500 (as supplied).
  • pH-value: 7.2-7.9 (as supplied).
  • Minimum film-forming temperature in °C: Approximately 56.
  • Density (g/cm³): Approximately 1.03.
• Properties and fields of use:
  • Particularly suitable for the formulation of 1C wood coatings, especially in combination with appropriate Liopur polyurethane dispersions.
• Storage:
  • The emulsion is preserved for storage and contains no solvents, plasticizers, formaldehyde, formaldehyde-releasing products, or alkyl phenol ethoxylates (APEO’s).
  • It should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, within a temperature range of +5 to +25°C.

Liocrylas 680 is an aqueous, self-crosslinking styrene acrylic emulsion used for various coating applications. Here are its key properties and uses:

• Characteristics: Aqueous, self-crosslinking styrene acrylic emulsion.
• Supplied as: 40% in water.
• Properties:
  • Non-volatile content: 40 +/- 1% (as supplied).
  • Viscosity in mPas: 20 - 300 (as supplied).
  • pH-value: 6.5 - 8.0 (as supplied).
  • Minimum film-forming temperature in °C: Approximately 65.
  • Density (g/cm³): Approximately 1.03.
• Properties and fields of use:
  • Blended with special Liopur-PU-dispersions, it's suitable for formulating 1C coatings with good abrasion resistance and high hardness. Coatings based on these combinations exhibit good chemical resistance against ethanol and plasticizers.
  • When used as a sole binder, it demonstrates good adhesion properties on plastics such as polystyrene. It also offers good resistance against ethanol and petrol.
• Storage:
  • Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, within a temperature range of +5 to +25°C.
  • The emulsion is preserved for storage and is solvent-free and plasticizer-free. It contains no free formaldehyde or formaldehyde-releasing products and no alkylphenol ethoxylates (APEO’s).

Liocrylas 640, also known as Liocryl XAS 3127, is an aqueous hydroxy functional acrylic emulsion. Here are its key properties and uses:

• Characteristics: Aqueous hydroxy functional acrylic emulsion, solvent and plasticizer-free.
• Supplied as: 45% in water.
• Properties:
  • Non-volatile content: 45 +/- 1% (as supplied).
  • Viscosity in mPas: 20 - 500 (as supplied).
  • pH-value: 7.0 - 9.0 (as supplied).
  • Minimum film-forming temperature in °C: Approximately 60.
  • Theoretical hydroxy value: Approximately 80.
  • Density (g/cm³): Approximately 1.03.
• Properties and fields of use:
  • Suitable for the formulation of fast-drying aqueous 2-pack top coats with high gloss and good chemical resistance.
  • Requires the addition of coalescents (e.g., 6% butylglycol) for proper film formation.
  • The emulsion film may have a slightly structured surface, but this does not adversely affect the properties of formulated coatings (e.g., gloss or transparency).
• Storage:
  • Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, within a temperature range of +5 to +25°C.
  • The emulsion is preserved for storage and does not contain free formaldehyde or formaldehyde-releasing products. It is solvent-free and plasticizer-free and contains no alkylphenol ethoxylates (APEO’s).

Liocrylas 615 is an aqueous styrene acrylic emulsion supplied at 42% in water. Here's a breakdown of its properties and uses:

• Characteristics: It's an aqueous styrene acrylic emulsion.
• Supplied as: 42% in water.
• Properties:
  • Non-volatile content: 42 +/- 1% (as supplied).
  • Viscosity in mPas: 20-300 (as supplied).
  • pH-value: 7.8-8.3 (as supplied).
  • Minimum film-forming temperature in °C: Approximately 43.
  • Density (g/cm³): Approximately 1.04.
• Properties and fields of use:
  • Suitable for use in primers and top coats for metal and other substrates.
  • Does not contain alkylphenol ethoxylates (APEO’s), solvents, or plasticizers.
• Storage:
  • It should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, within a temperature range of +5 to +25°C.
  • The emulsion is preserved for storage and does not contain formaldehyde or formaldehyde-releasing products.

Liocrylas 603 is an aqueous styrene acrylic emulsion supplied as 42% in water. Here's a summary of its properties and uses:

Characteristics:

• Aqueous styrene acrylic emulsion.

Supplied as:

• 42% in water.

Properties:

• Non-volatile content: 42 +/- 1% (as supplied).
• Viscosity in mPas: 40-200 (as supplied).
• pH-value: 8.5-9.5 (as supplied).
• Minimum film-forming temperature in °C: Approximately 30.
• Density (g/cm³): Approximately 1.02.

Properties and fields of use:

• Suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats.
• When combined with Synthalat W 30, it can produce very good hybrid paints with good salt spray resistance and high gloss.

Storage:

• Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• The emulsion is preserved for storage and does not contain formaldehyde or formaldehyde-releasing products or alkylphenol ethoxylates (APEO’s).

Liocrylam 955 is an aqueous, self-crosslinking pure acrylic emulsion, supplied as 40% in water. Here's a breakdown:

Characteristics:

• Aqueous, self-crosslinking pure acrylic emulsion.

Supplied as:

• 40% in water.

Properties:

• Non-volatile content: 40 +/- 1% (as supplied).
• Viscosity in mPas: 20-500 (as supplied).
• pH-value: 7.0-8.5 (as supplied).
• Minimum film-forming temperature in °C: Approximately 45.
• Density in g/cm³: Approximately 1.03.
• Emulsifier system: Anionic.

Properties and fields of use:

• Suitable for quick-drying wood coatings for industrial processing, allowing for early stackability.
• Exhibits very good blocking resistance according to various evaluation methods.

Storage:

• Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• The emulsion is preserved for storage and does not contain solvents, plasticisers, formaldehyde, formaldehyde-releasing products, or alkyl phenol ethoxylates (APEO’s).

Liocrylam 951 is an aqueous, self-crosslinking acrylic emulsion with fine-particle size, solvent- and plasticiser-free. Here's a summary:

Characteristics:

• Aqueous, self-crosslinking acrylic emulsion.
• Fine-particle size.
• Solvent- and plasticiser-free.

Supplied as:

• 40% in water.

Properties:

• Non-volatile content: 40 +/- 1% (as supplied).
• Viscosity in mPas: 20-500 (as supplied).
• pH-value: 7.0-8.0 (as supplied).
• Minimum film-forming temperature in °C: Approximately 10.
• Density in g/cm³: Approximately 1.04.
• Emulsifier system: Anionic.

Properties and fields of use:

• Used in solvent-free or low-solvent coatings.
• Distinguished by high blocking resistance and good stability characteristics.

Storage:

• Should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• The emulsion is preserved for storage and does not contain solvents, plasticisers, formaldehyde, formaldehyde-releasing products, or alkyl phenol ethoxylates (APEO’s).

Liocrylam 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups, characterized by fine-particle size and being solvent- and plasticiser-free. Here's a summary:

Characteristics:

• Aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups.
• Fine-particle size.
• Solvent- and plasticizer-free.

Supplied as:

• 40% in water.

Properties:

• Non-volatile content: 40 +/- 1% (as supplied).
• Viscosity in mPas: 20 - 500 (as supplied).
• pH-value: 6.5 - 8.0 (as supplied).
• Minimum film-forming temperature in °C: Approximately 46.
• Density in g/cm³: Approximately 1.04.
• Theoretical hydroxyl value: 60.
• Emulsifier system: Anionic.

Properties and fields of use:

• Particularly suitable for formulating aqueous 1-pack and 2-pack wood and furniture varnishes.
• Can be combined with Liopur polyurethane dispersions for this purpose.
• Exhibits high chemical resistance and yellowing resistance.
• Offers excellent transparency in the wet film and very good grain enhancement due to its fine particle size.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• It is preserved for storage and does not contain formaldehyde or formaldehyde-releasing products. Additionally, it contains no alkyl phenol ethoxylates (APEO’s).

Liocrylam 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups. Here's a summary:

Characteristics:

• Aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups.
• Fine-particle size.
• Solvent- and plasticizer-free.

Supplied as:

• 40% in water.

Properties:

• Non-volatile content: 40 +/- 1% (as supplied).
• Viscosity in mPas: 20 - 500 (as supplied).
• pH-value: 6.5 - 8.5 (as supplied).
• Minimum film-forming temperature in °C: Approximately 42 - 45.
• Density in g/cm³: Approximately 1.03.
• Theoretical hydroxyl value: 60.

Properties and fields of use:

• Particularly suitable for formulating aqueous 1-pack and 2-pack wood and furniture varnishes.
• Coatings based on Liocrylam 921 exhibit good grain enhancement on wood.

Storage:

• The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from frost and direct sunlight, at temperatures ranging from +5 to +25°C.
• It is preserved for storage and does not contain formaldehyde or formaldehyde-releasing products. Additionally, it contains no alkyl phenol ethoxylates (APEO’s).