Archives: Listings

Coapur™ 3025

Coapur™ 3025 is a water-soluble, non-ionic polyurethane thickener with the following typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 25%
Active Content: 25%
pH: 7
Brookfield viscosity: 6000 mPa.s
Specific gravity: 1.04
Solvent: Water
Description:
Coapur™ 3025 is a solvent-free and APEO-free pure associative polyurethane thickener, also known as HEUR, NISAT, or NSAT. It provides a pure Newtonian rheology to water-borne systems, allowing selective adjustment of high shear viscosities to ensure excellent film build, spatter resistance, and leveling, along with low dosage and flexibility of use.
Recommended Addition Level:
- Typical dosage: between 0.5% and 3% (dry on total formulation weight).
- Addition should occur at levels between 0.5% and 1.5% depending on the rheological profile of the co-thickener when used in combination, or between 1% and 3% when used as a sole thickener.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other packaging options may be available upon request.
Handling & Storage:
Store between 5°C and 40°C, protected from weathering and direct sunlight exposure. Reseal packaging immediately after use. To be easily pumpable, Coapur™ 3025 should be used at around 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information about health and environmental data, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Other Adhesives
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Color acceptance, post addition, ready to use, compatibility, cost-effective, easy handling
- Storage: Viscosity stability, in-can appearance, syneresis resistance
- Application: Film build, spatter resistance, brushability, rollability, temperature resistance
- Film Properties: Anticorrosion, leveling, rub out, water resistance, chemical resistance, gloss, hiding power/opacity, transparency

Coapur™ 3020 BB

Coapur™ 3020 BB is a water-soluble, non-ionic polyurethane thickener with the following typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 20%
Active Content: 20%
pH: 7
Brookfield viscosity: 3000 mPa.s
Specific gravity: 1.03
Solvent: Water
Description:
Coapur™ 3020 BB is a 90% bio-based HEUR thickener. It is a solvent-free and APEO-free pure associative polyurethane thickener (also known as HEUR, NISAT, or NSAT). It provides a pure Newtonian rheology to water-borne systems, allowing selective adjustment of high shear viscosities to ensure excellent film build, spatter resistance, and leveling, along with low dosage and flexibility of use.
Recommended Addition Level:
- Typical dosage: between 0.5% and 3% (as delivered on total formulation weight).
- When used in combination with other thickeners: between 0.5% and 1.5%, depending on the rheological profile of the co-thickener.
- When used as a sole thickener: between 1% and 3%.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other packaging options may be available upon request.
Handling & Storage:
Store between 5°C and 40°C, protected from weathering and direct sunlight exposure. Reseal packaging immediately after use. To be easily pumpable, Coapur™ 3020 BB should be used at around 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information about health and environmental data, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
- Adhesives & Sealants
  - Assembly
  - Other Adhesives
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Color acceptance, easy handling, post-addition, ready compatibility, cost in use
- Storage: Viscosity stability, in-can appearance, syneresis resistance
- Application: Film build, spatter resistance, brushability, rollability, temperature resistance
- Film Properties: Anticorrosion, leveling, rub out, water resistance, chemical resistance, gloss, hiding power/opacity, transparency

Coapur™ 3020

Coapur™ 3020 is a water-soluble, non-ionic polyurethane thickener with the following typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 20%
Active Content: 20%
pH: 7
Brookfield viscosity: 3000 mPa.s
Specific gravity: 1.03
Solvent: Water
Description:
Coapur™ 3020 is a solvent-free and APEO-free pure associative polyurethane thickener, also known as HEUR, NISAT, or NSAT. It provides a pure Newtonian rheology to water-borne systems, allowing selective adjustment of high shear viscosities to ensure excellent film build, spatter resistance, and leveling, along with low dosage and flexibility of use.
Recommended Addition Level:
- Typical dosage: between 0.5% and 3% (as delivered on total formulation weight).
- When used in combination with other thickeners: between 0.5% and 1.5%, depending on the rheological profile of the co-thickener.
- When used as a sole thickener: between 1% and 3%.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other packaging options may be available upon request.
Handling & Storage:
Store between 5°C and 40°C, protected from weathering and direct sunlight exposure. Reseal packaging immediately after use. To be easily pumpable, Coapur™ 3020 should be used at around 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information about health and environmental data, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Assembly
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Color acceptance, easy handling, post-addition, ready to use, compatibility, cost in use
- Storage: Viscosity stability, in-can appearance, syneresis resistance
- Application: Film build, spatter resistance, brushability, rollability, temperature resistance
- Film Properties: Anticorrosion, leveling, rub out, water resistance, chemical resistance, gloss, hiding power/opacity, transparency

Coapur™ 2501

Coapur™ 2501 is a water-soluble, non-ionic polyurethane rheology modifier. Here are its typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 20%
Active Content: 20%
pH: 7
Brookfield viscosity: 2500 mPa.s
Specific gravity: 1.04
Solvent: Water
Description:
Coapur™ 2501 is a non-ionic, associative, and solvent-free polyurethane (HEUR) rheology modifier that provides a pure Newtonian rheology to water-borne systems. It selectively adjusts high shear viscosities, ensuring excellent film build, spatter resistance, and leveling while maintaining flexibility of use.
Recommended Addition Level:
- Typical dosage: between 0.5% and 3% (as delivered on total formulation weight).
- When used in combination with other thickeners: between 0.5% and 1.5%, depending on the rheological profile of the co-thickener.
- When used as a sole thickener: between 1% and 3%.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other packaging options may be available upon request.
Handling & Storage:
Store between 5°C and 40°C, protected from weathering and direct sunlight exposure. Reseal packaging immediately after use. To be easily pumpable, Coapur™ 2501 should be used at around 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information about health and environmental data, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Color acceptance, compatibility, easy handling, post-ready addition to use
- Storage: Syneresis resistance, viscosity stability
- Application: Film build, spatter resistance, brushability, rollability, temperature resistance
- Film Properties: Anticorrosion, gloss, leveling, rub resistance, water resistance, chemical resistance

Coapur™ 2025

Coapur™ 2025 is a solvent and Alkyl Phenol Ethoxylate (APEO) free associative polyurethane thickener designed for water-based formulations. Here are its typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 25%
Active Content: 25%
pH: 7
Brookfield viscosity: 3000 mPa.s
Specific gravity: 1.04
Solvent: Water
Description:
Coapur™ 2025 is formulated as a pure associative thickener, interacting strongly with the binder of the formulation to control rheology at high shear rates. It is designed to enhance coating quality in water-based formulations.
Recommended Addition Level:
- As sole thickener in lacquers, gloss, and semi-gloss dispersion paints: 0.5% to 3%
- Combined with medium and/or low shear effective thickeners: 0.5% to 1.5%, both based on solids content.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other options may be available upon request.
Handling & Storage:
Store between 5 and 40°C, protected from weathering and direct sun exposure. Reseal packaging immediately after use. To be easily pumpable, Coapur™ 2025 should be used at about 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Packaging Adhesive
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Color acceptance, compatibility, easy handling, post-ready addition to use
- Storage: Viscosity stability, syneresis resistance
- Application: Brushability, film build, rollability, spatter resistance, temperature resistance, tinting resistance
- Film Properties: Hiding power/Opacity, leveling, anticorrosion, gloss, rub resistance, transparency, water resistance, chemical resistance

COAPUR™ 2020 W

Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Here are its typical characteristics and properties:
Nature: Water soluble non-ionic polyurethane
Appearance: Viscous whitish liquid
Solid Content: 20%
Active Content: 20%
pH: 7
Brookfield viscosity: 2000 mPa.s
Specific gravity: 1.03
Solvent: Water
Description:
Coapur™ 2020 W is formulated as a pure associative thickener, interacting strongly with the binder of the formulation to control rheology at high shear rates. It is designed to enhance coating quality in water-based formulations.
Recommended Addition Level:
- As sole thickener in lacquers, gloss, and semi-gloss dispersion paints: 0.5% to 3%
- Combined with medium and/or low shear effective thickeners: 0.5% to 1.5%, both based on solids content.
Standard Packaging:
Available in 1000L IBC and 220L drum. Other options may be available upon request.
Handling & Storage:
Store between 5 and 40°C, protected from weathering. Once opened, reseal packaging immediately. To be easily pumpable, use Coapur™ 2020 W at about 20°C. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Assembly
  - Other Adhesives
  - Pressure Sensitive Adhesives
Key Benefits:
- Formulation: Easy handling, color acceptance, compatibility, post-ready addition to use
- Storage: Viscosity stability, syneresis resistance
- Application: Brushability, film build, rollability, spatter resistance, temperature resistance, tinting resistance
- Film Properties: Chemical resistance, leveling, anticorrosion, gloss, rub resistance, transparency, water hiding, opacity

Coadis™ BR 3

Coadis™ BR 3 is a dispersing agent designed for use in gloss emulsion paints. Here are its typical characteristics and properties:
Nature: Polycarboxylate in aqueous solution
Appearance: Blue-green aqueous solution
Solid Content: 40%
Active Content: 40%
pH: 8
Brookfield viscosity: < 350 mPa.s
Specific gravity: 1.22
Neutralization type: Potassium
Solvent: Water
Description:
Coadis™ BR 3 is an acrylic copolymer dispersing agent specially formulated for water or glycol-based dispersions of titanium dioxide and iron oxides.
Recommended Addition Level:
To achieve good deflocculation of pigments and optimal gloss level, the recommended addition level in the formulation is typically between 0.60% and 1.0% (as supplied on total formulation weight).
Standard Packaging:
Available in 1000L IBC, 220L drum, and bulk packaging. Other options may be available upon request.
Handling & Storage:
Store between 5 and 40°C, protected from weathering. Once opened, reseal packaging immediately. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
- Adhesives & Sealants
  - Assembly
  - Sealants
Key Benefits:
- Formulation: Compatibility, easy handling, ready to use, cost efficiency
- Storage: Floating resistance, viscosity stability, antisettling, syneresis resistance
- Film Properties: Rub out, tint strength, anticorrosion, chemical resistance, gloss hiding, transparency, water resistance, opacity

Coadis™ 173

Coadis™ 173 is a polyacrylic acid dispersing agent used in waterborne paint formulations. Here are its typical characteristics and properties:
Nature: Polyacrylic acid
Appearance: Pale yellow aqueous solution
Solid Content: 30%
Active Content: 30%
pH: 10
Brookfield viscosity: < 350 mPa.s
Specific gravity: 1.21
Neutralization type: Sodium
Solvent: Water
Description:
Coadis™ 173 is designed to enhance the performance of waterborne paint formulations across various applications, including flat to semi-gloss paints, anticorrosion paints, caulks, sealants, and formulations with high levels of mineral pigments. It is especially suitable for formulations containing oxide pigments, particularly zinc oxides.
Recommended Addition Level:
Typically, 0.5% to 1.0% (dry on total pigment weight).
Standard Packaging:
Available in 1000L IBC, 220L drum, and bulk packaging. Other options may be available upon request.
Handling & Storage:
Store between 5 and 40°C, protected from weathering. Once opened, reseal packaging immediately. Use within 12 months under these conditions.
Health and Environmental Data:
Refer to the Safety Data Sheet for safe handling. For more information, contact the manufacturer.
Market:
- Coatings & Inks
  - Architectural Coating
  - Graphic Arts
  - Industrial Coating
  - Textile & Leather Coating
  - Traffic Paint
- Adhesives & Sealants
  - Assembly
  - Other Adhesives
  - Sealants
Key Benefits:
- Formulation: Compatibility, easy handling, ready to use, cost efficiency
- Storage: Antisettling, syneresis resistance, floating resistance, viscosity stability
- Film Properties: Stain resistance, transparency, water resistance, anticorrosion, gloss hiding, rub outpower/opacity
- APEO free: Yes
- Bacteria resistance: Yes
- Heavy metal free: Yes
- Solvent-free: Yes
Suitable for:
- Fillers
- Inorganic pigments
Coadis™ 173 serves as a dispersing agent for water-borne systems, providing excellent performance and versatility across various applications.

BR 100 P

BR 100 P is a thickening and leveling agent designed for water-based systems. Here are its key characteristics and properties:
- Nature: Water-soluble non-ionic polyurethane
- Appearance: Whitish liquid
- Solid Content: 50%
- Active Content: 50%
- pH: 5.5 (@10% in water, 25°C)
- Brookfield viscosity: 2000 mPa.s
- Specific gravity: 1.06
- Solvent: Water / Butylglycol (31/19)
Description: BR 100 P is specifically formulated to address common issues encountered in gloss emulsion paints, such as poor film build, brushability, and leveling. It provides improved rheological properties while maintaining compatibility with various paint components and preserving gloss levels post-drying.
Applications:
- Suitable for thickening anionic and non-ionic emulsions, particularly styrene-acrylics, vinyl-acrylics, and other copolymers.
- Used in gloss emulsion paints, semi-gloss, interior and exterior flat emulsion paints, anti-corrosive paints, and adhesives.
Recommended Addition Level: 0.3 - 2.0% of total formulation.
Standard Packaging: Available in 1000L IBC and 220L plastic drum. Other packaging options may be available upon request.
Handling & Storage: Store between 5 and 40°C, protected from weathering and direct sunlight. Protect from frost. Once opened, reseal packaging immediately and use within 12 months.
Processing Instructions:
- Slowly add 20 parts of BR 100 P (50%) to 80 parts of water under continuous stirring.
- Avoid adding BR 100 P in reverse, as it leads to a highly viscous phase.
- Add at the pigment grinding stage or at the end of letdown after polymer emulsion addition.
- Determine the addition level based on the type of resin emulsion.
- Maximum thickening is achieved 24 hours after manufacture.
Health and Environmental Data: Refer to the Safety Data Sheet for safe handling. For more information on health and environmental data, contact the manufacturer.

WorléeKyd E 55

WorléeKyd E 55 70% In White Spirit is a long oil, low viscosity alkyd resin based on drying vegetable fatty acids. Here are its technical specifications:
- Oil content: Approximately 63%
- Oil type: Special fatty acid, urethane modified
- Content of phthalic anhydride: Approximately 17%
- Non-volatile content, 1h/125 °C: 70% ± 1 (DIN EN ISO 3251)
- Colour (Gardner), 60% in ws 145 - 195: Maximum 10 (DIN ISO 4630)
- Acid value, on solids: Maximum 10 (DIN EN ISO 3682)
- Flow time, 20 °C, 60% in ws 145 - 195: 200 - 300 seconds (DIN 53211-4)
- Delivery form: 70% in white spirit 145 - 195
WorléeKyd E 55 is compatible with the majority of medium and long oil alkyd resins. It is also compatible with most maleic and phenolic modified hard resins. Solubility-wise, it is soluble in all common solvents.
Applications and properties:
- Suitable as a sole binder and especially in combination with medium oil alkyd resins for the manufacture of high-quality industrial coatings like car repair, machine, and agricultural implement paints.
- Driers recommended for WorléeKyd E 55 include cobalt, zirconium, and calcium metals, or Nuodex Combi APB (Elementis) in a drier solution.