Archives: Listings

Deuteron OG 8820

DEUTERON OG 8820 is a surface additive consisting of fine PMU (Polymethyl urea) particle dispersions in TMP(EO)3 TA (Ethoxylated Trimethylolpropane triacrylate). Here's an overview of its key features:
1. Product Description: DEUTERON OG 8820 is part of the DEUTERON OG 882x product family, which offers different grades with various particle size distributions. These particle size distributions cater to different applications, including those requiring extremely thin films. DEUTERON OG 8820 can function as a scratch resistance additive for high gloss applications or as a matting agent for high-quality applications.
2. Applications: The DEUTERON OG 882x family is suitable for use in all UV-curable applications where TMP(EO)3 TA is acceptable as a solvent. Preferred applications include overprint varnishes, floor coatings (such as PVC, laminate floorings, and wood floors), and wood coatings. The use of DEUTERON OG 882x enhances properties such as reduced coefficient of friction (COF), surface protection, scratch and polishing resistance, and pleasant surface haptics.
3. Dosage: The typical dosage range for DEUTERON OG 8820 depends on the desired effect. For high gloss applications, the dosage typically ranges from 1.0% to 5.0%, while for matting agents, it ranges from 8% to 25.0%. The exact dosage varies based on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage.
4. Product Characteristics:
  - Specific Weight: Approximately 1.18 g/cm3
  - Reactive Solvent: TMP(EO)3 TA
  - Active Content: Approximately 30%
  - Particle Size: dv50 (median particle size) is around 3.5 µm, and dv99 (particle size below which 99% of the particles fall) is around 12 µm.
  - Appearance: White dispersions/pastes
5. Processing: DEUTERON OG additives are easy to disperse and can be incorporated using a common high-speed stirrer. It's recommended to add DEUTERON OG additives while stirring to prevent agglomeration caused by concentration differences. Additional grinding should be avoided. These additives can be used as post-addable materials.
6. Storage Conditions: The shelf life of DEUTERON OG 8820 is 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. It's important to stir well before use to prevent phase separation.
7. Package Sizes: DEUTERON OG 8820 is available in steel drums with net weights of 25 kg and 220 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON OG 882x products are classified as dangerous products and require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON OG 8820 is developed and supplied by DEUTERON GmbH, a company known for its high-quality additives for the coating industry.

Deuteron OG 8807

DEUTERON OG 8807 is a surface additive consisting of fine PMU (Polymethyl urea) particles dispersed in DPGDA (Dipropylene glycol diacrylate). Here's an overview of its key features:
1. Product Description: DEUTERON OG 8807 is part of the DEUTERON OG 880x product family, which offers various grades with different particle size distributions. This additive is specifically designed to provide scratch resistance in high gloss applications or act as a matting agent in high-quality applications. It is formulated to maintain high gloss levels while offering high hardness and a low coefficient of friction (COF).
2. Applications: DEUTERON OG 8807 finds utility in a wide range of UV-curable applications where DPGDA is an acceptable solvent. Common applications include overprint varnishes, floor coatings (e.g., PVC, laminate floorings, and wood floors), and wood coatings. It contributes to properties such as reduced COF, surface protection, scratch and polishing resistance, and pleasant surface haptics.
3. Dosage: The typical dosage range for DEUTERON OG 8807 depends on the desired effect. For high gloss applications, the dosage typically ranges from 1.0% to 5.0%, while for matting agents, it ranges from 8% to 25.0%. The exact dosage varies based on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage.
4. Product Characteristics:
  - Specific Weight: Approximately 1.11 g/cm3
  - Reactive Solvent: DPGDA
  - Active Content: Approximately 30%
  - Particle Size: dv50 (median particle size) is less than 2.5 µm, and dv99 (particle size below which 99% of the particles fall) is less than 7 µm.
  - Appearance: White dispersion/paste
5. Processing: DEUTERON OG 8807 is easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add the additive while stirring to prevent agglomeration. Additional grinding should be avoided. It can be used as a post-addable material.
6. Storage Conditions: The additive has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. It's essential to stir well before use to prevent phase separation.
7. Package Sizes: DEUTERON OG 8807 is available in steel drums with net weights of 25 kg and 220 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON OG 8807 is classified as a dangerous product and requires labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON OG 8807 is developed and supplied by DEUTERON GmbH, a reputable company known for its high-quality additives for the coating industry.

Deuteron OG 8805

DEUTERON OG 8805 is a surface additive composed of fine PMU (Polymethyl urea) particles dispersed in DPGDA (Dipropylene glycol diacrylate). Here's a detailed overview:
1. Product Description: DEUTERON OG 8805 is part of the DEUTERON OG 880x product family, which offers different grades with varying particle size distributions. This additive is designed to enhance scratch resistance in high gloss applications or act as a matting agent in high-quality applications. It maintains high gloss levels while providing high hardness and low coefficient of friction (COF).
2. Applications: This additive is suitable for various UV-curable applications where DPGDA is acceptable. It is commonly used in overprint varnishes, floor coatings (such as PVC, laminate floorings, and wood floors), and wood coatings. It contributes to properties like reduced COF, surface protection, scratch and polishing resistance, and pleasant surface haptics.
3. Dosage: The typical addition range for DEUTERON OG 8805 depends on the desired effect. For high gloss applications, the dosage typically ranges from 1.0% to 5.0%, while for matting agents, it ranges from 8% to 25.0%. The exact dosage varies based on factors like binder type, additives, solvent content, layer thickness, and film shrinkage.
4. Product Characteristics:
  - Specific weight: Approximately 1.11 g/cm3
  - Reactive solvent: DPGDA
  - Active content: Approximately 30%
  - Particle size: dv50 (median particle size) is approximately 2.8 µm, and dv99 (particle size below which 99% of the particles fall) is less than 8 µm.
  - Appearance: White dispersion/paste
5. Processing: DEUTERON OG 8805 is easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add the additive while stirring to prevent agglomeration. Additional grinding should be avoided. It can be used as a post-addable material.
6. Storage Conditions: The additive has a shelf life of 12 months when stored at room temperature and dry conditions. The storage temperature should not exceed 35°C. It's essential to stir well before use to prevent phase separation.
7. Package Sizes: DEUTERON OG 8805 is available in steel drums with net weights of 25 kg and 220 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON OG 8805 is classified as a dangerous product and requires labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON OG 8805 is developed and supplied by DEUTERON GmbH, a company known for its high-quality additives for the coating industry.

Deuteron OG 8803

DEUTERON OG 8803 are surface additives consisting of fine PMU (Polymethyl urea) particles dispersed in DPGDA (Dipropylene glycol diacrylate). Here's a breakdown of what they are:
1. Product Description: The DEUTERON OG 880x product family offers three different grades with varying particle size distributions. These additives can be used to enhance scratch resistance in high gloss applications or act as matting agents in high-quality applications. They are known for their ability to maintain high gloss levels while providing high hardness and low coefficient of friction (COF).
2. Applications: These additives are suitable for a range of UV-curable applications where DPGDA is acceptable. Common applications include overprint varnishes, floor coatings (PVC, laminate floorings, and wood floors), and wood coatings. They contribute to properties such as reduced COF, surface protection, scratch and polishing resistance, and pleasant surface haptics.
3. Dosage: The typical addition range varies depending on the desired effect. For high gloss applications, the dosage ranges from 1.0% to 5.0%, while for matting agents, it ranges from 8% to 25.0%. The exact dosage depends on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage.
4. Product Characteristics:
  - Specific weight: Approximately 1.11 g/cm3 for all grades
  - Reactive solvent: DPGDA
  - Active content: Approximately 30%
  - Particle size: Varies among the grades (dv50 and dv99 values provided for each grade)
  - Appearance: White dispersions/pastes
5. Processing: These additives are easy to disperse and can be incorporated using a common high-speed stirrer. It's recommended to add them while stirring to prevent agglomeration. They can be used as post-addable materials, and additional grinding should be avoided.
6. Storage Conditions: They have a shelf life of 12 months at room temperature and dry conditions. Storage temperature should not exceed 35°C. It's advisable to stir well before use to prevent phase separation.
7. Package Sizes: Available in steel drums with net weights of 25 kg and 220 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON OG 880x additives are classified as dangerous products and require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON OG 880x additives are developed and supplied by DEUTERON GmbH, known for its high-quality additives for the coating industry.

Deuteron WAX PP

DEUTERON WAX PP is a micronized modified Polypropylene wax with versatile applications and beneficial properties. Here's an overview:
1. Product Description: DEUTERON WAX PP is a modified Polypropylene wax designed to provide excellent surface feel, good matting, and mechanical stability. It can be used in solvent-based, water-based, 100% UV curable systems, and powder coatings.
2. Applications: It finds applications in various industries including wood and joinery coatings, metal coatings, flexographic inks, overprint varnishes, and powder coatings. It is particularly effective in achieving smooth and elegant matting, burnishing/polishing resistance, reducing settling of silica and fillers, anti-blocking, and degassing.
3. Dosage: The recommended dosage ranges from 0.5% to 3.0% calculated on the complete formulation, depending on the binder, application, and desired properties.
4. Product Characteristic:
  - Appearance: White powder
  - Density: Approximately 0.95 g/cm3
  - Melting point: 138°C
  - Particle size: Approximately 6 µm
5. Processing: DEUTERON WAX PP is easy to disperse and can be incorporated using a common high-speed stirrer. In low viscous systems, a high shear dispersing unit may be necessary for proper dispersion. For water-based systems, a pre-mix with a suitable cosolvent and emulsifier is recommended.
6. Storage Conditions: It has a shelf life of 24 months at room temperature and dry conditions. Storage temperature should not exceed 35°C.
7. Package Sizes: Available in paper bags with a net weight of 15 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON WAX PP is not classified as a dangerous product and does not require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON WAX PP is developed and supplied by DEUTERON GmbH, a company known for its high-quality additives for the coating industry.

Deuteron SR 28

DEUTERON SR 28 is a thickener based on xanthagalactomannan, a natural biopolymer derived from polysaccharides. Here are the main features and applications of this product:
1. Product Description: DEUTERON SR 28 is soluble in both cold and hot water, forming pseudoplastic solutions. It is compatible with a wide temperature and pH range but may experience depolymerization at pH levels below 2 and above 12. It can tolerate the presence of up to 40% organic solvents like alcohols or glycol ethers.
2. Applications: It is suitable for various applications including viscosity adjustment, reduction of floating/settling of waxes and pigments, improved stability/anti-sagging, and preparation of stable gels. DEUTERON SR 28 is particularly useful in water-based coatings and printing inks, pigment concentrates, emulsion paints and plasters, water-based adhesives, and food processing.
3. Dosage: The required addition level depends on the desired properties:
  - Thickening/Gel formation: 0.1 - 0.75%
  - Stabilization of solids against sedimentation: 0.05 - 0.2%
  - Anti-sagging: 0.1 - 0.3%
4. Product Characteristic:
  - Appearance: Yellow powder
  - Bulk density: Approximately 740 g/l
  - Viscosity (1% in water): Approximately 3400 mPa*s
5. Processing: DEUTERON SR 28 hydrates rapidly but tends to form lumps. It should be added slowly while stirring to ensure proper dispersion. Stir at a high shear rate until complete dispersion is achieved. As viscosity increases, reduce the speed to avoid foam formation. Alternatively, it can be mixed with a glycol/glycol ether or alcohol to form a high viscosity suspension for easier incorporation.
6. Storage Conditions: It should be stored at room temperature and dry conditions for up to 24 months. Storage temperature should not exceed 35°C, and relative humidity should not exceed 70%.
7. Package Sizes: Available in paper bags with a net weight of 25 kg.
8. Safety: Classified as not dangerous according to Regulation (EC) No. 1272/2008 and does not require labeling. Detailed safety information is provided in the Safety Data Sheet.
DEUTERON SR 28 is manufactured and supplied by DEUTERON GmbH, a company specializing in innovative additives for the coating industry.

Deuteron SO 302

DEUTERON SO 302 is a soft-touch, texturing, and matting additive specifically designed for water-based systems. Here are the key details about this product:
1. Product Description: DEUTERON SO 302 is a liquid preparation containing fine elastomer particles in water. It offers a soft-touch effect to water-based systems, enhancing their tactile properties. Compared to DEUTERON SO 300, it has a coarser particle size distribution, resulting in unique soft-texture effects.
2. Applications: It can be used in various water-based coating and ink systems to achieve soft-touch and matting effects. These effects are independent of the applied film thickness. DEUTERON SO 302 can be combined with other surface additives like waxes or matting agents to achieve desired properties.
3. Dosage: The recommended dosage ranges from 5% to 20% of the complete formulation, depending on the binder, application, and desired properties. Higher addition levels lead to stronger effects and increased flexibility. Cross-linking with isocyanates is possible for improved mechanical stability.
4. Product Characteristics:
  - Active content: 45%
  - Density: Approximately 1.0 g/cm³
  - Viscosity: Approximately 300 mPa*s
  - Particle size dv50: Approximately 30 µm
  - Particle size dv90: Approximately 60 µm
  - OH-content: Approximately 2.1% (calculated on the solid content)
  - Appearance: White to yellowish dispersion
5. Processing: DEUTERON SO 302 is easy to disperse and can be incorporated using a common high-speed stirrer. It can be added at any stage of the production process, and post-addition adjustments are possible. Care should be taken to prevent drying of the product to avoid agglomeration.
6. Storage Conditions: It should be stored in original sealed containers at room temperature and dry conditions for up to 12 months. Stirring the material before use is recommended to prevent phase separation.
7. Package Sizes: Available in plastic drums with net weights of 30 kg and 220 kg.
8. Safety: Classified as not dangerous according to Regulation (EC) No. 1272/2008 and does not require labeling. Detailed safety information is provided in the Safety Data Sheet.
DEUTERON SO 302 is part of the product range offered by DEUTERON GmbH, which specializes in developing and selling innovative additives for the coating industry.

Deuteron ND 960 HF

DEUTERON ND 960 HF is a wetting and viscosity reducing additive primarily used in unsaturated polyester systems. Here's a breakdown of its key characteristics and applications:
1. Chemical Description: It consists of amides of fatty acids in combination with N-heterocyclic derivatives, dissolved in an aromatic hydrocarbon solvent.
2. Physical Data:
  - Appearance: Yellow clear liquid
  - Consistency: Very low viscosity
  - Specific Weight: Approximately 0.9 g/cm³
  - Non-volatile content: Approximately 40%
  - Flash Point: Above 66°C
  - Odor: Resembles amines and aromatics
3. Properties: DEUTERON ND 960 HF acts as a wetting and viscosity reducing agent. Even small additions to unsaturated polyester resins enable an increase in pigment/filler content or improve dispersibility.
4. Application: It is suitable for highly filled binder systems where the wetting properties of the binders are insufficient. Common applications include the manufacturing of fillers or mastics based on unsaturated polyester/reactive solvent systems.
5. Dosage: Recommended dosage ranges from 0.1% to 0.5% (calculated on the binder solution), but should not exceed 1%. The exact dosage should be determined through trials.
6. Processing: It should be added to the resin component before the dispersing process. Mixing can be done either before or after dispersing, depending on the desired timing.
7. Storage Conditions: It can be stored in its original tightly closed containers for at least 24 months at room temperature.
8. Package Sizes: Available in sheet steel hobbock UniGrip containers with a net weight of 25 kg.
9. Safety Regulations: Classified as a dangerous product according to Regulation (EC) No. 1272/2008 and requires labeling. Detailed safety information is provided in the safety data sheet.
DEUTERON GmbH specializes in the production and sales of additives for the coatings industry, including matting agents, conductivity agents, and UV initiators. With over 30 years of experience, they offer high-quality products and comprehensive technical support to their customers globally.

Deuteron WAX TF

DEUTERON WAX TF is a micronized PTFE (polytetrafluoroethylene) modified PE (Polyethylene) wax designed for surface protection and slip reduction. Here's an overview of its key features and applications:
1. Product Description: DEUTERON WAX TF combines PTFE and PE to create a synergistic effect in terms of performance and dispersibility. It is a versatile product suitable for use in solvent-based, water-based, and 100% systems, including UV-curable systems.
2. Applications: This wax is suitable for various applications, including:
  - Wood and joinery coatings
  - Flexographic and gravure inks
  - Overprint varnishes
  - Metal coatings (can and coil coatings)
  - Powder coatings
3. Performance Improvements: DEUTERON WAX TF enhances performance in the following areas:
  - COF (coefficient of friction) reduction
  - Mar and abrasion resistance
  - Anti-blocking performance
  - Metal marking resistance
4. Dosage: The typical dosage range is between 0.5% and 2.0% of the complete formulation, depending on the binder, application, and desired properties.
5. Product Characteristics:
  - Appearance: White powder
  - Density: Approximately 1.01 g/cm³
  - PE Melting Point: 122°C
  - Particle Size: Approximately 5.5 µm
6. Processing: DEUTERON WAX TF is easy to disperse and can be incorporated using a common high-speed stirrer. In low viscous systems, a high shear dispersing unit may be necessary for proper dispersion. It can also be prepared as a pre-mix in a solvent phase or water-based system.
7. Storage Conditions: The product has a shelf life of 24 months at room temperature and dry conditions, with storage temperatures not exceeding 35°C.
8. Package Sizes: Available in paper bags of 20 kg net weight.
9. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON WAX TF is not classified as a dangerous product and does not require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet available on the manufacturer's website.
DEUTERON GmbH has been developing and selling innovative additives since 1977, serving as a trusted partner for the national and international paint, lacquer, and coating industry. Their product range includes matting agents, anti-static additives, texturing additives, thickeners, and UV initiators.

Deuteron PMH C

DEUTERON PMH C is an organic duromeric matting agent designed for various coating applications. Here's a breakdown of its key features and applications:
1. Product Description: DEUTERON PMH C is a micronized duromeric plastic powder based on PMU (Polymethyl urea). It is synthesized to have a well-balanced mix between compact and amorphous particle structures, making it an effective matting agent with minimal impact on viscosity and porosity. Its highly compatible chemistry allows it to be used in a wide variety of coating applications and systems.
2. Applications: This matting agent is versatile and suitable for use in almost all coating applications, including waterborne, solvent-borne, and 100% systems. It can be used as a standalone additive or in combination with other materials to enhance their properties. DEUTERON PMH C improves properties such as matting effect, low viscosity influence, mechanical and chemical resistance, scratch resistance, resistance to polishing, temperature resistance, pleasant touch, improved blocking resistance, insolubility in commonly used paint solvents, and biodegradability.
3. Dosage: The typical addition range for DEUTERON PMH C is between 1% and 15% of the complete formulation. However, the required dosage level depends on various factors such as binder type, additives, solvent content, and application parameters. It's recommended to determine the appropriate addition level through practical ladder studies.
4. Product Characteristics:
  - Density: Approximately 1.47 g/cm³
  - Oil absorption: Approximately 167 g Palatinol N/100 g (DIN ISO 787/5)
  - Particle size dv50: Approximately 5.5 µm
  - Particle size dv90: Approximately 12.1 µm
  - OH-content: Approximately 0.27%
  - Appearance: Fine white powder
5. Processing: Due to its PMU chemistry, DEUTERON PMH C is highly compatible with a wide range of systems. It can be easily incorporated using a high-speed stirrer without the need for specific wetting agents or dispersing aids. While it is shear stable in high shear processes, it should not be ground in a bead mill.
6. Storage Conditions: The product has a shelf life of 24 months at room temperature and dry conditions. It's important to store it at temperatures not exceeding 35°C.
7. Package Sizes: Available in paper bags of 15 kg net weight.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON PMH C is not classified as a dangerous product and does not require labeling. Detailed safety information can be found in the provided Safety Data Sheet and Regulatory Information Sheet.
DEUTERON GmbH has been successfully developing and selling innovative additives since 1977, serving as an important partner for the national and international paint, lacquer, and coating industry. Their product range includes matting agents, anti-static additives, texturing additives, thickeners, and UV initiators.