Archives: Listings

Deuteron OG 8674 is another variant within the Deuteron OG 867x series offered by Deuteron GmbH. Like the other products in this series, it is a fine PMU (Polymethyl urea) particle dispersion in water.

Here are the key characteristics and features of Deuteron OG 8674:

1. Particle Size Distribution: Deuteron OG 8674 has a specific particle size distribution, with a dv50 (median particle size) of less than 2 µm.
2. Application: Similar to other products in the series, Deuteron OG 8674 is suitable for use in water-borne systems. It finds applications in areas such as inks, wood coatings, can coatings, and metal coatings.
3. Properties and Benefits: Deuteron OG 8674 offers properties such as reduced coefficient of friction (COF), surface protection, scratch and polishing resistance, and low impact on gloss levels at low dosages.
4. Matting Effect: At higher dosages, Deuteron OG 8674 can create a matting effect, which is advantageous for achieving matte finishes in thin layer applications.
5. Ease of Processing: Deuteron OG additives, including OG 8674, are easy to disperse and incorporate into formulations using common high-speed stirrers. It is recommended to add these additives while stirring to prevent agglomeration.
6. Dosage: The typical addition range for Deuteron OG 8674, similar to other products in the series, falls between 1.0% and 5.0%. However, the exact dosage required may vary depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage.
7. Temperature Resistance: Deuteron OG 8674 exhibits good temperature resistance, making it suitable for applications where the coated surfaces may be exposed to elevated temperatures.
8. Biodegradability: Like other products in the series, Deuteron OG 8674 is based on a biodegradable polymer, aligning with environmentally friendly practices.

In summary, Deuteron OG 8674 is tailored to meet the specific requirements of coatings formulations, providing solutions for enhancing surface properties, performance, and aesthetics in various applications, while offering ease of processing and environmental compatibility.

Deuteron OG 8672 is a specific product within the Deuteron OG 867x series offered by Deuteron GmbH. Like the other products in this series, it is a fine PMU (Polymethyl urea) particle dispersion in water.

Here are some key characteristics and features of Deuteron OG 8672:

1. Particle Size Distribution: Deuteron OG 8672 has a specific particle size distribution, with a dv50 (median particle size) of approximately 2.8 µm.
2. Application: It is designed for use in water-borne systems, particularly in applications such as inks, wood coatings, can coatings, and metal coatings.
3. Properties and Benefits: Similar to other products in the series, Deuteron OG 8672 offers properties such as reduced coefficient of friction (COF), surface protection, scratch and polishing resistance, and low impact on gloss levels at low dosages.
4. Matting Effect: At higher dosages, Deuteron OG 8672 can provide a matting effect, which is beneficial for achieving matte finishes in thin layer applications.
5. Ease of Processing: Deuteron OG additives, including OG 8672, are easy to disperse and incorporate into formulations using common high-speed stirrers. They should be added while stirring to prevent agglomeration.
6. Dosage: The typical addition range for Deuteron OG 8672, like other products in the series, is between 1.0% and 5.0%. However, the exact dosage required may vary depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage.
7. Temperature Resistance: It exhibits good temperature resistance, making it suitable for applications where the coated surfaces may be exposed to elevated temperatures.
8. Biodegradability: Deuteron OG 8672, like other products in the series, is based on a biodegradable polymer, aligning with environmentally friendly practices.

Overall, Deuteron OG 8672 is tailored to meet the specific requirements of coatings formulations, providing solutions for enhancing surface properties, performance, and aesthetics in various applications while offering ease of processing and environmental compatibility.

Deuteron OG 8670, along with its related products OG 8672 and OG 8674, is a series of fine PMU (Polymethyl urea) particle dispersions in water offered by Deuteron GmbH, a company specializing in innovative additives for the coating industry.

These products are designed to offer various benefits in water-borne systems, particularly in applications such as inks, wood coatings, can coatings, and metal coatings. Some of the properties and benefits provided by the Deuteron OG 867x additives include:

1. Reduced COF (Coefficient of Friction): These additives contribute to reducing friction, enhancing surface smoothness, and improving scratch and polishing resistance.
2. Surface Protection: They offer protection to surfaces against wear and tear, enhancing their durability.
3. Low Impact on Gloss Level: Even at low dosages, these additives maintain high gloss levels of the coated surfaces.
4. Matting Effects: At higher dosages, they can create matte finishes, particularly suitable for thin layer applications.
5. Pleasant Surface Haptics: They provide a pleasing tactile feel to the coated surfaces.
6. Recoatability: The additives facilitate easy recoating of surfaces without issues.
7. Temperature Resistance: They exhibit good temperature resistance, making them suitable for applications where the coated surfaces may be exposed to elevated temperatures.
8. Mimic Wax Effects: They can mimic wax effects without the negative influence of waxes, providing desired aesthetics without compromising on performance.
9. Biodegradability: These additives are based on a biodegradable polymer, which aligns with environmentally friendly practices.

The dosage of Deuteron OG 8670 and its variants typically ranges from 1.0% to 5.0%, but the exact amount needed depends on various factors such as the type of binder used, additives present, solvent content, layer thickness, and film shrinkage. It's recommended to determine the appropriate dosage through practical testing.

The products are supplied in water-based dispersions or pastes, making them easy to incorporate into formulations using common high-speed stirrers. They should be added while stirring to prevent agglomeration caused by concentration differences.

Deuteron GmbH assures the safety of these products, classifying them as non-dangerous according to Regulation (EC) No. 1272/2008. Detailed safety information can be found in the Safety Data Sheet and Regulatory Information Sheet available on their website.

In summary, Deuteron OG 8670 and its variants offer a range of properties and benefits that cater to the needs of the coating industry, providing solutions for enhancing surface properties and performance in various applications.

Deuteron OG 8634 is a specific variant within the Deuteron OG 863x product family, which consists of fine PMU (Polymethyl urea) particle dispersions in isopropanol. Here's an overview of Deuteron OG 8634:

1. Product Description: Deuteron OG 8634 offers fine PMU particle dispersions in isopropanol, providing different particle size distributions suitable for various applications, including those requiring extremely thin films.
2. Applications: Deuteron OG 8634 is generally suitable for use in many solvent-based applications where fast-evaporating alcohol is acceptable. Typical applications include flexographic inks, wood coatings, industrial coatings, and textile printing, especially for small labels.
3. Benefits: Similar to other variants in the product family, Deuteron OG 8634 offers benefits such as reduced coefficient of friction, surface protection, scratch and polishing resistance, low impact on gloss level at low dosages, pleasant surface haptics, excellent recoatability, and temperature resistance.
4. Dosage: The typical addition range for Deuteron OG 8634 is 1.0% to 5.0%, depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage. Practical ladder studies are recommended to determine the precise dosage level.
5. Product Characteristics:
   • Specific Weight: Approximately 0.92 g/cm3
   • Solvent: Isopropanol
   • Active Content: Approximately 32%
   • Particle Size: The median particle size (dv50) is approximately less than 1.5 µm, and the particle size below which 99% of the particles fall (dv99) is also less than 3.5 µm.
   • Appearance: White dispersions
6. Processing: Deuteron OG additives, including Deuteron OG 8634, are easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add them while stirring to prevent eventual agglomeration caused by concentration differences. Additional grinding should be avoided.
7. Storage Conditions: Deuteron OG 8634 has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. Before use, it's essential to stir well to prevent phase separation.

Deuteron OG 8632 is a specific variant within the Deuteron OG 863x product family, which consists of fine PMU (Polymethyl urea) particle dispersions in isopropanol. Here's an overview of Deuteron OG 8632:

1. Product Description: Deuteron OG 8632 offers fine PMU particle dispersions in isopropanol, providing different particle size distributions suitable for various applications, including those requiring extremely thin films.
2. Applications: Deuteron OG 8632 is generally suitable for use in many solvent-based applications where fast-evaporating alcohol is acceptable. Typical applications include flexographic inks, wood coatings, industrial coatings, and textile printing, especially for small labels.
3. Benefits: Similar to other variants in the product family, Deuteron OG 8632 offers benefits such as reduced coefficient of friction, surface protection, scratch and polishing resistance, low impact on gloss level at low dosages, pleasant surface haptics, excellent recoatability, and temperature resistance.
4. Dosage: The typical addition range for Deuteron OG 8632 is 1.0% to 5.0%, depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage. Practical ladder studies are recommended to determine the precise dosage level.
5. Product Characteristics:
   • Specific Weight: Approximately 0.92 g/cm3
   • Solvent: Isopropanol
   • Active Content: Approximately 32%
   • Particle Size: The median particle size (dv50) is approximately 2.3 µm, and the particle size below which 99% of the particles fall (dv99) is less than 1.5 µm.
   • Appearance: White dispersions
6. Processing: Deuteron OG additives, including Deuteron OG 8632, are easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add them while stirring to prevent eventual agglomeration caused by concentration differences. Additional grinding should be avoided.
7. Storage Conditions: Deuteron OG 8632 has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. Before use, it's essential to stir well to prevent phase separation.

Deuteron OG 8614 is a specific variant within the Deuteron OG 861x product family, which consists of fine PMU (Polymethyl urea) particle dispersions in high-boiling aromatic solvents. Here's an overview of Deuteron OG 8614:

1. Product Description: Deuteron OG 8614 offers fine PMU particle dispersions in high-boiling aromatic solvents. Like other members of the product family, it provides different particle size distributions, allowing formulators to choose the most suitable option for various applications, including those requiring extremely thin films.
2. Applications: Deuteron OG 8614 is generally suitable for use in solvent-based applications where a high-boiling solvent is acceptable. Typical applications include can coatings, coil coatings, general metal coatings, and industrial coatings. It helps enhance properties such as scratch resistance, surface protection, and polishing resistance.
3. Benefits: Similar to other variants in the product family, Deuteron OG 8614 offers benefits such as reduced coefficient of friction, improved surface protection, scratch and polishing resistance, and pleasant surface haptics. It also provides excellent recoatability and temperature resistance.
4. Dosage: The typical addition range for Deuteron OG 8614 is 1.0% to 5.0%, depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage. Determining the precise dosage level may require practical studies.
5. Product Characteristics:
   • Specific Weight: Approximately 1.03 g/cm3
   • Solvent: Aromatics A 150 ND
   • Active Content: Approximately 20%
   • Particle Size: The median particle size (dv50) is approximately 1.5 µm, and the particle size below which 99% of the particles fall (dv99) is less than 3.5 µm.
   • Appearance: White dispersions
6. Processing: Deuteron OG additives, including Deuteron OG 8614, are easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add them while stirring to prevent agglomeration caused by concentration differences. Avoid additional grinding.
7. Storage Conditions: Deuteron OG 8614 has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. Before use, it's essential to stir well to prevent phase separation.
8. Package Sizes: Deuteron OG 8614 is available in steel drums with net weights of 25 kg and 200 kg.
9. Safety: According to Regulation (EC) No. 1272/2008, Deuteron OG 861x products, including Deuteron OG 8614, are classified as dangerous products and require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.

Deuteron OG 8614 is developed and supplied by DEUTERON GmbH, a reputable company known for its high-quality additives for the coating industry.

Deuteron OG 8612 is a specific variant within the Deuteron OG 861x product family, which comprises fine PMU (Polymethyl urea) particle dispersions in high-boiling aromatic solvents. Here's an overview of Deuteron OG 8612:

1. Product Description: Deuteron OG 8612 offers fine PMU particle dispersions in high-boiling aromatic solvents. Like other members of the product family, it provides different particle size distributions, allowing formulators to choose the most suitable option for various applications, including those requiring extremely thin films.
2. Applications: Deuteron OG 8612 is generally suitable for use in solvent-based applications where a high-boiling solvent is acceptable. Typical applications include can coatings, coil coatings, general metal coatings, and industrial coatings. It helps enhance properties such as scratch resistance, surface protection, and polishing resistance.
3. Benefits: Similar to other variants in the product family, Deuteron OG 8612 offers benefits such as reduced coefficient of friction, improved surface protection, scratch and polishing resistance, and pleasant surface haptics. It also provides excellent recoatability and temperature resistance.
4. Dosage: The typical addition range for Deuteron OG 8612 is 1.0% to 5.0%, depending on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage. Determining the precise dosage level may require practical studies.
5. Product Characteristics:
   • Specific Weight: Approximately 1.03 g/cm3
   • Solvent: Aromatics A 150 ND
   • Active Content: Approximately 25%
   • Particle Size: The median particle size (dv50) is approximately 2.3 µm, and the particle size below which 99% of the particles fall (dv99) is less than 1.5 µm.
   • Appearance: White dispersions
6. Processing: Deuteron OG additives, including Deuteron OG 8612, are easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add them while stirring to prevent agglomeration caused by concentration differences. Avoid additional grinding.
7. Storage Conditions: Deuteron OG 8612 has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. Before use, it's essential to stir well to prevent phase separation.
8. Package Sizes: Deuteron OG 8612 is available in steel drums with net weights of 25 kg and 200 kg.
9. Safety: According to Regulation (EC) No. 1272/2008, Deuteron OG 861x products, including Deuteron OG 8612, are classified as dangerous products and require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.

Deuteron OG 8612 is developed and supplied by DEUTERON GmbH, a reputable company known for its high-quality additives for the coating industry.

DEUTERON OG 861 is a member of the DEUTERON OG 861x product family, which consists of fine PMU (Polymethyl urea) particle dispersions in high-boiling aromatic solvents. Here's an overview of DEUTERON OG 861:

1. Product Description: DEUTERON OG 861 offers fine PMU particle dispersions in high-boiling aromatic solvents. Within the product family, three different grades with different particle size distributions are available, providing versatility for various applications, including those requiring extremely thin films. These additives are designed to enhance properties such as scratch resistance, surface protection, and polishing resistance in solvent-based systems where high-boiling solvents are acceptable.
2. Applications: DEUTERON OG 861 is suitable for use in various solvent-based applications, including can coatings, coil coatings, general metal coatings, and industrial coatings. It is particularly beneficial for reducing the coefficient of friction, providing surface protection, and enhancing scratch and polishing resistance. Additionally, it offers pleasant surface haptics and excellent recoatability.
3. Dosage: The typical addition range for DEUTERON OG 861 is 1.0% to 5.0%. The exact dosage level depends on factors such as binder type, additives, solvent content, layer thickness, and film shrinkage. It is recommended to determine the required addition level through practical studies.
4. Product Characteristics:
   • Specific Weight: Approximately 1.03 g/cm3
   • Solvent: Aromatics A 150 ND
   • Active Content: Approximately 32%
   • Particle Size: dv50 (median particle size) is approximately 3.5 µm, and dv99 (particle size below which 99% of the particles fall) is approximately 12 µm.
   • Appearance: White dispersions
5. Processing: DEUTERON OG additives are easy to disperse and can be incorporated using a common high-speed stirrer. It is recommended to add them while stirring to avoid agglomeration caused by concentration differences. Additional grinding should be avoided.
6. Storage Conditions: DEUTERON OG 861 has a shelf life of 12 months when stored at room temperature and under dry conditions. The storage temperature should not exceed 35°C. It's important to stir well before use to prevent phase separation.
7. Package Sizes: DEUTERON OG 861 is available in steel drums with net weights of 25 kg and 200 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON OG 861x products are classified as dangerous products and require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.

DEUTERON OG 861, along with other members of the DEUTERON OG 861x family, is developed and supplied by DEUTERON GmbH, known for its high-quality additives for the coating industry.