Archives: Listings

BYK-306 is a silicone-containing surface additive manufactured by BYK-Chemie GmbH, designed specifically for ambient-curing plastic systems and solvent-borne coating systems. Here are the key details and specifications from the provided data sheet:

1. Product Data:

• Composition: Solution of a polyether-modified polydimethylsiloxane
• Typical Properties:
  • Density (20 °C): 0.93 g/ml
  • Non-volatile matter (30 min, 150 °C): 12.5%
  • Solvents: Xylene/Monophenyl glycol 7/2
  • Flash point: 25 °C

2. Applications:

• Ambient Curing Plastic Systems: Designed for use in plastic systems that cure at ambient temperatures.
• Coatings Industry: Suitable for solvent-borne coating systems.

3. Special Features and Benefits:

• Surface Tension Reduction: Provides a strong reduction in surface tension, enhancing substrate wetting.
• Prevention of Cratering: Helps prevent crater formation in coatings.
• Leveling Improvement: Improves leveling, especially in pigmented systems.
• Dust and Spray Mist Acceptance: Improves the acceptance of dust and spray mist.
• Surface Slip: Increases surface slip, which can be beneficial in various coating applications.
• Foam Stabilization: Unlike traditional silicone oils, BYK-306 is user-friendly and helps avoid foam stabilization issues in coatings.

4. Recommended Use:

• Polyurethane and Epoxy Systems: Recommended for use in polyurethane and epoxy systems.
• Solvent-Borne Systems: Suitable for all solvent-borne coating systems.

5. Recommended Levels:

• 0.1-0.5% additive (as supplied) based on the total formulation.
• Optimal levels should be determined through practical application testing.

6. Incorporation and Processing Instructions:

• Incorporation: Can be added at any stage of the production process, including post-addition.
• Dilution: Predilution before incorporation can facilitate easier dosing.

7. Handling and Storage:

• Storage: Store at temperatures above 5 °C to prevent separation or turbidity.
• Shelf Life: Standard shelf life considerations apply.

DISPERBYK-103 is a wetting and dispersing additive specifically designed for solvent-borne matting agent pastes used in various coatings applications. Here are the key details from the technical data sheet:

1. Product Description:

• Name: DISPERBYK-103
• Composition: Solution of a copolymer with filler affinic groups

2. Typical Properties:

• Density (20 °C): 1.06 g/ml
• Non-volatile matter (10 min., 150 °C): 40%
• Solvents: Methoxypropylacetate
• Flash Point: 47 °C

3. Applications:

• Coatings Industry: Particularly suited for wood and furniture coatings, industrial coatings, and protective coating systems.
• Architectural Coatings: Also recommended, though less specifically targeted.

4. Special Features and Benefits:

• Production of Matting Agent Pastes: Enables the production of highly concentrated matting agent pastes.
• Ease of Use: Pastes are fluid, stable during storage, easy to incorporate, and can be automatically dosed into systems.
• Adjustability: Matting agent pastes can be post-added to fine-tune the degree of matting.
• Processing Advantage: Provides lower gloss reduction compared to matting agents incorporated dry.

5. Recommended Use and Levels:

• Recommended Levels (as supplied):
  • Inorganic pigments: 5-10%
  • Titanium dioxide: 2-4%
  • Matting agent: 30-60%
• Optimal levels should be determined through laboratory testing based on specific formulation requirements.

6. Incorporation and Processing Instructions:

• Incorporation: Additive must be incorporated into the millbase for optimum dispersion.
• Example: Mix with solvent and resin, then add the matting agent according to specified ratios.

7. Storage and Handling:

• Storage: Temperature-sensitive; store below 10 °C to prevent clouding and separation. Heat to approximately 35 °C and stir if separation occurs.
• Handling: Ensure thorough mixing before use to maintain additive effectiveness and prevent processing issues.

AQUAMAT 272 N is a matting wax dispersion primarily used in aqueous coatings, printing inks, and overprint varnishes to enhance surface protection and achieve a matting effect. Here are the key details from the technical data sheet:

1. Product Description:

• Name: AQUAMAT 272 N
• Composition: Dispersion of modified polyethylene wax
• Carrier: Water

2. Typical Properties:

• Non-volatile matter (60 min., 125 °C): 55%
• Melting Point (wax content): 125 °C
• Particle Size (Hegman): 30 µm
• Viscosity (23 °C, D=800/s): < 500 mPa·s
• pH Value: 4

3. Applications:

• Coatings Industry: Used in architectural coatings, wood and furniture coatings, and industrial coatings.
• Printing Inks and Overprint Varnishes: Enhances abrasion resistance and provides a matting effect.

4. Special Features and Benefits:

• Surface Protection: Improves the durability and resistance of the coated surface.
• Matting Effect: Provides a desired level of gloss reduction, enhancing aesthetic appeal.
• Application Flexibility: Suitable for various aqueous formulations requiring surface matting and enhanced protection.

5. Recommended Use and Levels:

• Coatings:
  • Recommended Levels: 1-6% additive (as supplied) based on total formulation, depending on desired matting degree.
  • Incorporation: Preferably added at the end of the production process with low shear rate. Mix well before use.
• Printing Inks and Overprint Varnishes:
  • Recommended Levels: 1-2% additive (as supplied) based on total formulation.
  • Incorporation: Similar to coatings, added at the end of production with low shear rate. Mix well before use.

6. Storage and Handling:

• Storage: Temperature sensitive; store and transport between 5 °C and 35 °C.
• Handling: Ensure thorough mixing before use to prevent dried-out additive residues, which can affect final product quality.