Silver metallic base-coat, based on Alberdingk AS 2610

This formulation details an Industrial Coating identified as "Industrial Coatings EU SF 1.21." It's a silver metallic base-coat formulated using Alberdingk AS 2610 as the primary base material. Here's a breakdown of the components and steps involved:

1. Metal Paste (Stapa Hydrolan 9157): 5.00% by weight
2. Butylglycol: 6.00% by weight
3. Surfynol E 104: 0.30% by weight

These components are mixed separately as constituents 9-13 before being added to the clear varnish.

Application Method: Compressed-air spraying
pH-value: Approximately 8 for the metal paste and approximately 7.5 for the formulation
Spray Viscosity (DIN 53211-cup 4mm): Approximately 15 s for the metal paste and approximately 20 s for the formulation

The raw materials are sourced from various suppliers:

1. Alberdingk Boley
2. BASF
3. Milliken
4. Kusumoto Chemicals
5. Eckart Pigments
6. Evonik

There's a note emphasizing that each customer's use of the product may vary, so the provided information, including recommendations, should be tested and validated independently. All sales are subject to the standard terms posted on Milliken's website unless explicitly agreed otherwise in writing.

The formulation of the base-coat involves mixing Alberdingk AS 2610 with water, Dehydran 1293, Disparlon AQ 607, ethyldiglycol, and butyldiglycol. Borchi® Gel 0621 and Borchi® Gel Thix 921 are then added and mixed, followed by the addition of Borchi® Gen 12 and water.