Rheotech™ 4000 MB

Find Suppliers

Main Actions

Find Suppliers for Rheotech™ 4000 MB

Description

Rheotech™ 4000 MB is an acrylic associative thickener designed for water-based systems, offering similar performance to Rheotech™ 4000 LC but with a bio-attributed content of 60%. Here are its typical characteristics and properties:

Nature: Acrylic associative thickener
Appearance: Low viscous white milky liquid
Solid Content (%): 30
Active Content (%): 30
pH: 3
Specific Gravity: 1.06
Solvent: Water

Description:
Rheotech™ 4000 MB is the Mass Balance version of Rheotech™ 4000 LC, providing a bio-attributed content of 60%. This allows for a significant reduction in the product's carbon footprint compared to its fossil-based counterpart. Rheotech™ 4000 MB delivers identical performance to Rheotech™ 4000 LC and can be seamlessly integrated as a direct drop-in replacement.

Standard Packaging:
Available in:

1000L IBC
220L Drum
Bulk

Handling & Storage:
Store between 5°C and 40°C, protect from frost, weathering, and direct sun exposure. Once opened, reseal immediately. Surface drying and slight sedimentation are normal but do not affect performance if solids content meets specifications. If necessary, filter the product before use. Use within 6 months from delivery.

Health and Environmental Data:
For safe handling, refer to the Safety Data Sheet. For more information on health and environmental data, contact the manufacturer.

Market:

Coatings & Inks
- Architectural Coating
- Graphic Arts
- Industrial Coating
Adhesives & Sealants
- Assembly
- Other Adhesives
- Sealants

Key Benefits:

Formulation: Cost in use, color acceptance, compatibility, easy handling.
Storage: In-can appearance, syneresis resistance, antisettling, viscosity stability.
Application: Gunnability, brushability, rollability, sag resistance, temperature resistance, tinting, dilution, edge-coverage, slump resistance, sprayability.
Film Properties: Hiding power/opacity, rub out, gloss, stain resistance.

Files

TDS_RHEOTECH™-4000-MB_en_WW.pdf View

Application

Adhesives & Sealants

No comments yet.

Add a review

You May Also Be Interested In

Siliplast 810

Siliplast 810 is a product used primarily as a filler and raw material in industrial applications:
Product Information
- Trade Name: Siliplast 810
- Supplier: Quarzwerke GmbH, Germany
- Uses: Used primarily as a filler and raw material in various industrial applications.
Composition
- Quartz (SiO₂): 1% - 10% by weight. Quartz is the primary hazardous component, known for its potential to cause lung damage if inhaled in dust form.
- Feldspar-group minerals: 87% or more by weight.
Hazards Identification
- Classification:
  - Specific target organ toxicity - repeated exposure, Category 2 (Lungs).
- Hazard Statements:
  - H373: May cause damage to organs (lungs) through prolonged or repeated exposure if inhaled.
- Precautionary Statements:
  - P260: Do not breathe dust.
  - P314: Get medical advice/attention if you feel unwell.
  - P501: Dispose of contents/container to an approved waste disposal plant.
Handling and Storage
- Handling: Avoid dust formation and breathing dust. Use appropriate ventilation.
- Storage: Keep in a dry, well-ventilated place. Store in tightly closed containers.

WALOCEL™ CRT 10000 G

WALOCEL™ CRT 10000 G Sodium Carboxymethylcellulose is a specific type of sodium carboxymethylcellulose (CMC) produced by The Dow Chemical Company. Here's a detailed overview based on the provided sales specification:
Product Overview:
- Product Name: WALOCEL™ CRT 10000 G
- Chemical Name: Sodium Carboxymethylcellulose
- Specification Number: 000000127502
- Previous Specified Material: 00160302
- Trademark: WALOCEL™ (Trademark of The Dow Chemical Company)
Specifications and Testing Requirements:
1. Active Content (Dry Basis):
  - Minimum: 99.00%
  - Method: CE-55.4
  - Test Frequency: Audit basis
2. Substitution Degree:
  - Range: 0.82 — 0.95
  - Method: CE-28.4
3. Moisture Content (As Packaged):
  - Maximum: 8.0%
  - Method: CE-7.1
4. pH Value (1% Aqueous Solution):
  - Range: 6.5 — 8.5
  - Method: CE-8.1
5. Total Salt Content (Dry Basis):
  - Maximum: 1.00%
  - Method: CE-15.4
  - Test Frequency: Audit basis
6. Viscosity (Brookfield, LVT, SP.3, 30 RPM, 1% Aqueous Solution, Dry Basis, 25°C):
  - Range: 900 — 1500 mPa.s
  - Method: CE-5.15
Product Characteristics:
- Active Content: Indicates the amount of carboxymethylcellulose present in the product.
- Degree of Substitution: Refers to the extent to which the cellulose molecule has been substituted with carboxymethyl groups. This affects the solubility and viscosity.
- Moisture Content: The amount of water present in the product. This can affect the product’s handling and performance.
- pH Value: Measures the acidity or alkalinity of a 1% aqueous solution of the product.
- Total Salt Content: Indicates the amount of salt present, which can influence the viscosity and stability of the product.
- Viscosity: A measure of the product's thickness or resistance to flow in an aqueous solution. This is important for its functionality in various applications.
Usage and Safety:
- Precautionary Information: Always read precautionary information and material safety sheets for handling, storage, and safety guidelines.
- Compliance: The product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping, and labeling.

Dowanol DPnP

DOWANOL™ DPnP Glycol Ether (Dipropylene Glycol n-Propyl Ether) is a slow-evaporating glycol ether produced by The Dow Chemical Company. Here is a detailed overview of the product based on the provided information:
Product Overview:
- Product Name: DOWANOL™ DPnP Glycol Ether
- Chemical Formula: C3H7O[CH2(CH)CH3O]2H (Major isomer)
- CAS Number: 29911-27-1
Description:
DOWANOL™ DPnP is characterized by a slower evaporation rate compared to DOWANOL™ PnP glycol ether and is slightly more hydrophobic. It has a mid-range balance between hydrophobic and hydrophilic properties and offers significant water solubility. It is highly effective as a coalescent in coatings, providing excellent film properties and compatibility with hydrophobic materials.
Physical Properties:
- Molecular Weight: 176.2 g/mol
- Boiling Point: 213°C (415°F)
- Flash Point (Setaflash Closed Cup): 88°C (190°F)
- Freezing Point: <-75°C (<-103°F)
- Vapor Pressure at 20°C: 0.08 mmHg (0.11 mbar)
- Specific Gravity (25/25°C): 0.919
- Density:
  - @ 20°C: 0.921 g/cm³ (7.68 lb/gal)
  - @ 25°C: 0.916 g/cm³ (7.65 lb/gal)
- Viscosity at 25°C: 11.4 cP (mPa•s)
- Surface Tension at 25°C: 27.8 dynes/cm (mN/m)
- Specific Heat at 25°C: 1.94 J/g/°C
- Heat of Vaporization at Normal Boiling Point: 265 J/g
- Net Heat of Combustion at 25°C: 29.7 kJ/g
- Autoignition Temperature: 205°C (401°F)
- Evaporation Rate:
  - n-Butyl Acetate = 1.0: 0.014
  - Diethyl Ether = 1.0: 903
- Solubility at 25°C:
  - Solvent in Water: 17.2 g/100 g (15 wt%)
  - Water in Solvent: 22.5 g/100 g (18.5 wt%)
Hansen Solubility Parameters:
- Dispersion (d): 15.0 (J/cm³)^(1/2)
- Polar (p): 3 (J/cm³)^(1/2)
- Hydrogen Bonding (h): 9.6 (J/cm³)^(1/2)
Flammable Limits (Vol.% in Air):
- Lower: 0.68%
Applications:
- Coalescent for Water-Borne Latex Coatings: Enhances film formation and performance.
- Active Solvent for Solvent-Borne Coatings: Provides good solvency and compatibility with various materials.
Features:
- Colorless
- Low odor
- Moderately soluble in water (19 ml/100 ml)
- Good chemical stability
- Excellent solvent properties
- Efficient surface tension reduction
- Low toxicity
- Wide range of applications

TEGO® Airex 902 W

TEGO® Airex 902 W is a defoamer and deaerator specifically designed for waterborne formulations. Here is a detailed overview of the product based on the provided information:
Product Overview:
- Product Name: TEGO® Airex 902 W
- Manufacturer: Evonik Operations GmbH
Description:
TEGO® Airex 902 W is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. It is particularly effective against both micro-foam and macro-foam.
Key Benefits:
- Universal use in waterborne formulations.
- Optimal combination in eliminating both micro-foam and macro-foam.
- Highly compatible with a wide range of formulations.
- Especially suitable for medium- to low-viscosity formulations.
Applications:
- Brush application/roller application
- Airless spraying
- Compressed air spraying
- Flexo/gravure printing
- Dip coating, flow coating, curtain coating
- Flooring
Suitability:
- Waterborne: Suitable
- Solventborne: Suitable
- 2-pack: Partly suitable
- 100% radiation-curing: Not suitable
- Addition during grinding stage: Suitable
- Addition during let-down stage: Suitable
Typical Applications:
- Wood coatings
- General industrial coatings
- Plastic coatings
- Printing inks
Technical Data:
- Active Matter Content: 20%
- Appearance: White thixotropic liquid
- Chemical Description: Emulsion of a polyether siloxane copolymer, contains fumed silica
- Solvent: Solvent-free
Solubility:
- For stability reasons, emulsions may not be diluted by organic solvents.
Recommended Addition Level:
- As supplied, calculated on total formulation: 0.1 - 3.0%
Processing Instructions:
- Before use, mix briefly with low shear forces.
- Add to the coating as supplied.
- Long-term effectiveness of the product is dependent on the formulation and should be tested in individual formulations.
Handling & Storage:
- Store in original unopened packaging between +4 and +40°C.
- Shelf life of 24 months from the date of manufacture.
- Keep away from freezing.

Rheotech™ 4000 MB

Main Actions

Description

Files

Categories

Application

Add a review

Leave a Reply · Cancel reply

You May Also Be Interested In

Siliplast 810

Product Information

Composition

Hazards Identification

Handling and Storage

WALOCEL™ CRT 10000 G

Product Overview:

Specifications and Testing Requirements:

Product Characteristics:

Usage and Safety:

Dowanol DPnP

Product Overview:

Description:

Physical Properties:

Hansen Solubility Parameters:

Flammable Limits (Vol.% in Air):

Applications:

Features:

TEGO® Airex 902 W

Product Overview:

Description:

Key Benefits:

Applications:

Suitability:

Typical Applications:

Technical Data:

Solubility:

Recommended Addition Level:

Processing Instructions:

Handling & Storage:

Rheotech™ 4000 MB

Manufacturer

Main Actions

Description

Files

Categories

Application

Add a review

Leave a Reply · Cancel reply

You May Also Be Interested In

Siliplast 810

Product Information

Composition

Hazards Identification

Handling and Storage

WALOCEL™ CRT 10000 G

Product Overview:

Specifications and Testing Requirements:

Product Characteristics:

Usage and Safety:

Dowanol DPnP

Product Overview:

Description:

Physical Properties:

Hansen Solubility Parameters:

Flammable Limits (Vol.% in Air):

Applications:

Features:

TEGO® Airex 902 W

Product Overview:

Description:

Key Benefits:

Applications:

Suitability:

Typical Applications:

Technical Data:

Solubility:

Recommended Addition Level:

Processing Instructions:

Handling & Storage: