PLIOTEC™ LEB18

Pliotec™ LEB18 is a unique modified styrene-acrylic copolymer latex designed to offer superior resistance to surfactant leaching and efflorescence, while also providing balanced dirt pick-up resistance and crack bridging ability. This product demonstrates enhanced early rain resistance due to its specialized stabilization system.

Key Features and Benefits

• Superior Resistance: High resistance to exudation (surfactant leaching) and efflorescence.
• Dirt Pick-Up Resistance: Balanced resistance against dirt accumulation.
• Crack Bridging: Effective in bridging cracks.
• Early Rain Resistance: Enhanced resistance to rain shortly after application.
• No Added Formaldehyde: Safe for use with no added formaldehyde.
• Weathering and Color Retention: Excellent durability and color retention for exterior applications.
• Adhesion: Superior adhesion to porous masonry, ferrous and non-ferrous metals, and various substrates.
• Pigment Binding: High efficiency in binding pigments.

Typical Properties

• Solids Content: 42.5%
• pH: 8.0
• Viscosity: 600 cps (Brookfield #3/60 rpm @25°C)
• Glass Transition Temperature (Tg Midpoint): 12°C
• Minimum Film Forming Temperature: -1°C (30.2°F)
• VOC Content: 20 g/L
• Ionic Character: Anionic

Applications

• Flat or High Build Masonry Paints
• Topcoats for EIFS (Exterior Insulation and Finish Systems)
• House Plinths
• All-Weather Paints

Shipping and Storage

• Packaging: Supplied in road tankers, non-returnable plastic drums, or palletized bulk containers (1,000 liters).
• Storage Conditions: Protect from frost and direct sunlight. Recommended storage temperatures are between +5°C and +30°C.
• Microbiological Protection: Contains in-can preservatives to prevent microbial attack during transportation. Additional preservatives may be necessary based on storage conditions.
• Shelf Life: 12 months from the date of manufacture, if stored properly.

Safety and Handling

Before handling Pliotec™ LEB18, consult the Safety Data Sheet for advice on safe use and disposal. The product must be handled with care to avoid contamination and contact with unprotected metal surfaces.