Clear, 1K Wood Care Oil Based on Linseed Oil

This detailed formulation outlines a wood care oil enhanced with Borchi® OXY-Coat 1310, designed to meet stringent regulatory requirements while maintaining high performance. Here are the key components:

• WorleeKyd RL 1290: This serves as the primary material, likely providing the base properties of the wood care oil.
• 8% Manganese Drier: Manganese driers are commonly used in coatings to accelerate the drying process.
• Borchi® OXY-Coat 1310: This additive enhances the performance of the wood care oil, ensuring low VOC content, oxime-free composition, and improved durability.
• Anti-Skinning Additive (Optional): Mentioned as a potential addition if needed to prevent skinning of the formulation.

The formulation emphasizes compliance with new MEKO regulations in the EU, which classify MEKO as a carcinogen and require labeling for MEKO content exceeding 0.1%. Borchi® OXY-Coat 1310 addresses these concerns by being oxime-free.

Additional features highlighted in the formulation include:

• Dry Time: The formulation aims for improved dry times under standard conditions (23°C / 50% R.H.), denoted by ST (Set to Touch), TF (Tack-Free), and DH (Dry Hard) parameters.
• Chemical Resistance: The wood care oil is designed to exhibit better resistance to chemicals for up to 2 hours.
• Storage Stability: It boasts improved stability, as evidenced by the absence of gel particles or skin formation even after 2 weeks at 40°C.
• Color Retention: Lower Gardner Color Number suggests better color retention properties.

The document also provides information on where to order samples and emphasizes that the provided information is for guidance purposes, urging customers to test and assume responsibility for their specific uses.