BYK® 024

TEGO® Airex 902 W is a defoamer and deaerator specifically designed for waterborne formulations. Here is a detailed overview of the product based on the provided information:

Product Overview:

• Product Name: TEGO® Airex 902 W
• Manufacturer: Evonik Operations GmbH

Description:

TEGO® Airex 902 W is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. It is particularly effective against both micro-foam and macro-foam.

Key Benefits:

• Universal use in waterborne formulations.
• Optimal combination in eliminating both micro-foam and macro-foam.
• Highly compatible with a wide range of formulations.
• Especially suitable for medium- to low-viscosity formulations.

Applications:

• Brush application/roller application
• Airless spraying
• Compressed air spraying
• Flexo/gravure printing
• Dip coating, flow coating, curtain coating
• Flooring

Suitability:

• Waterborne: Suitable
• Solventborne: Suitable
• 2-pack: Partly suitable
• 100% radiation-curing: Not suitable
• Addition during grinding stage: Suitable
• Addition during let-down stage: Suitable

Typical Applications:

• Wood coatings
• General industrial coatings
• Plastic coatings
• Printing inks

Technical Data:

• Active Matter Content: 20%
• Appearance: White thixotropic liquid
• Chemical Description: Emulsion of a polyether siloxane copolymer, contains fumed silica
• Solvent: Solvent-free

Solubility:

• For stability reasons, emulsions may not be diluted by organic solvents.

Recommended Addition Level:

• As supplied, calculated on total formulation: 0.1 - 3.0%

Processing Instructions:

• Before use, mix briefly with low shear forces.
• Add to the coating as supplied.
• Long-term effectiveness of the product is dependent on the formulation and should be tested in individual formulations.

Handling & Storage:

• Store in original unopened packaging between +4 and +40°C.
• Shelf life of 24 months from the date of manufacture.
• Keep away from freezing.

AGITAN® 280 is a defoamer designed for use in aqueous systems, specifically targeting applications where foam control is crucial. Here’s a detailed overview of the product:

Product Overview:

• Product Name: AGITAN® 280
• Manufacturer: MÜNZING CHEMIE GmbH
• Product Type: Defoamer

Composition:

• Components: Blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers, and nonionic emulsifiers
• Appearance: Liquid, brownish, turbid
• Active Ingredients: Approximately 100%

Physical Properties:

• Density: Approx. 0.93 g/cm³ at 20°C
• Consistency: Medium viscosity
• Flash Point: Above 120°C
• Solubility in Water: Emulsifiable, resulting in an emulsion that separates slowly

Applications:

AGITAN 280 is effective in controlling foam in various aqueous systems. It is used in:

• Architectural Coatings: Paints for buildings and other structures
• Emulsion Plasters: Coatings used in construction
• Industrial and Wood Coatings: Protective and decorative coatings for industrial and wood surfaces
• Printing Inks: Inks used in various printing processes
• Adhesives: Glue and bonding agents

Recommended Usage:

• Dosage: Typically ranges from 0.1% to 0.5% based on the finished product.
• Application:
  • For Optimal Results: Add AGITAN 280 undiluted during pigment grinding.
  • Distribution:
    • 2/3 of the defoamer should be added to the pigment dispersion.
    • 1/3 should be added during the letdown stage.
  • Dilution: May improve distribution if diluted in solvents used in the formulation.

Storage and Handling:

• Temperature: Store between 15°C and 25°C.
• Freezing: Not sensitive to freezing, but mixing is required before use as it tends to separate.
• Shelf Life: Minimum of 15 months from the date of manufacture when stored in closed containers.

AGITAN® 315 is a defoamer designed for use in aqueous systems. Below is a detailed overview of its properties, composition, and applications:

Product Overview:

• Product Type: Defoamer for aqueous systems
• Manufacturer: Münzing Chemie GmbH

Composition:

• Blend of:
  • Modified nonionic fatty compounds
  • Hydrophobic silica
  • White oils of pharmaceutical grade

Physical Properties:

• Appearance: Liquid
• Color: Yellowish, turbid
• Active Ingredients: Approx. 100%
• Consistency: Medium viscosity
• Density at 20°C: Approx. 0.85 g/cm³
• Flash Point: Above 100 °C
• Solubility in Water: Hardly emulsifiable, results in unstable emulsion

Applications:

AGITAN 315 is recommended for use in various aqueous emulsion systems, especially those requiring low odor formulations. It is compatible with common binders and is suitable for:

• Architectural coatings
• Emulsion plasters
• Industrial and wood coatings
• Printing inks
• Adhesives
• Cleaners

Usage Recommendations:

• Dosage:
  • Typically ranges from 0.1% to 0.5% on the finished product
  • Optimal distribution and de-aeration are achieved by adding 2/3 of AGITAN 315 to the pigment dispersion and 1/3 to the letdown
  • Ladder studies are recommended to determine the optimum concentration
• Addition Method:
  • Can be added undiluted during pigment grinding
  • Dilution in solvents of the formulation may improve distribution

Storage and Handling:

• Storage Temperature: 15 to 25 °C for better handling
• Shelf Life: Minimum of 15 months from the date of manufacture in closed containers
• Mixing: Product tends to separate upon storage and must be mixed before use

Foamaster® MO 2150 is a defoaming agent designed for use in various coatings and adhesives. Here is an overview of the product:

Product Overview:

• Brand: Foamaster®
• Product Name: MO 2150
• Manufacturer: BASF

Key Properties:

• Type: Defoamer based on mineral oil.
• Chemical Nature: Blend of foam-destroying substances.
• Physical Form: Yellowish liquid.
• Solubility: Insoluble in water.
• Density: Approximately 0.86 g/cm³ at 20 °C.
• Viscosity: Approximately 400 mPa·s.

Features and Benefits:

• Excellent Defoamer: Effective in mid to high PVC decorative coatings.
• Stability: Exceptional product stability that retains antifoaming properties during paint storage.
• Cost-Effective: Offers an excellent price/performance ratio.
• Versatile Use: Recommended for synthetic latex, water-based architectural coatings, organosilicate-based plasters, and aqueous adhesives.

Storage and Handling:

• Storage Conditions:
  • Might form slight sedimentation or phase separation during storage.
  • Defoaming properties remain unaffected if mixed thoroughly before use.
• Safety: Follow advice and information given in the safety data sheet. Observe protective and workplace hygiene measures adequate for handling chemicals.

Application Details:

• Usage:
  • Effective in synthetic latex and water-based architectural coatings.
  • Suitable for plasters based on organosilicate and aqueous adhesives.
• Recommended Concentrations: 0.1 – 0.4% of the total formulation.
• Application Methods:
  • During paint manufacturing, add during grinding for perfect incorporation.
  • In emulsion polymerization processes, add directly onto the foam as it forms.