AQUACER 513

Find Suppliers

Main Actions

Find Suppliers for AQUACER 513

Description

AQUACER 513 is a wax emulsion primarily composed of high-density polyethylene (HDPE) for enhancing surface protection in various aqueous applications such as coatings, printing inks, care products, and polishes. Here's a breakdown of its properties and applications:

Composition: It comprises a non-ionic emulsion of oxidized HD polyethylene wax.

Typical Properties:

Non-volatile matter: 35% (after 60 minutes at 125°C)
Carrier: Water
Melting point: 135°C (wax content)
Viscosity: 60 mPa·s at 23°C (measured with a shear rate of 800/s)
pH value: 9.2

Storage and Transportation: It should be stored and transported within a temperature range of 5°C to 35°C, and it's advisable to stir before use.

Applications:

Coatings and Printing Inks:
- Special Features and Benefits: AQUACER 513 enhances scratch resistance in aqueous coatings and increases abrasion resistance in printing inks. It also improves resistance to black heel marking in parquet coatings.
- Recommended Use: Suitable for architectural coatings, wood coatings, and printing inks. It is VOC-free (Volatile Organic Compound content < 1500 ppm).

Recommended Levels:

For coatings: 1-6% additive based on the total formulation.
For printing inks: 3-14% additive based on the total formulation.

Incorporation and Processing Instructions: The additive is preferably post-added using low-speed agitation, and it should be stirred well before use.

Care Products and Polishes:

Special Features and Benefits: AQUACER 513 is compatible with various polymer dispersions, resin solutions, plasticizers, film-forming agents, and surfactants. It enhances polishability and dirt repulsion, with increased water and alcohol resistance, abrasion resistance, and protection against heel marks when blended with polymers.
Recommended Use: Suitable for self-shine floor care products for various types of floors, including hard floor surfaces like stone, granite, marble, as well as soft floors like parquet, PVC, linoleum, and rubber.
Recommended Levels: 5-10% additive based on the total formulation.

Incorporation and Processing Instructions: The wax additive should be added with stirring after blending polymers with plasticizers and water, but before incorporating surface-active substances.

In summary, AQUACER 513 offers significant benefits in enhancing surface protection and performance in aqueous coatings, printing inks, care products, and polishes, making it suitable for various applications in the coatings and care industries.

Files

TDS_AQUACER_513_EN.pdf View

Application

No comments yet.

Add a review

You May Also Be Interested In

Deuteron OG 330

Deuteron OG 330 is an additive designed to enhance slip, abrasion resistance, and rub resistance in water-based systems. It is an aqueous dispersion of polyethylene wax modified with PTFE (Polytetrafluoroethylene). This product typically appears as a white dispersion with a viscosity of approximately 600 mPa·s and a specific weight of around 1.02 g/cm³.
With a concentration of approximately 46% polyethylene/PTFE and 4% isopropanol, Deuteron OG 330 is formulated to improve surface properties effectively while maintaining ease of handling during paint manufacturing. It's particularly suitable for water-based clear lacquers and topcoats where the presence of PTFE is acceptable, such as air-drying and stoving enamels, aqueous acrylic lacquers, and inks.
The recommended dosage of Deuteron OG 330 ranges from 1.0% to 3.0%, although the exact dosage should be determined through trial formulations. It can be incorporated into the lacquer using a high-speed stirrer before viscosity adjustment. In many cases, adding the product to the mill base doesn't cause issues, which can optimize the production process.
Deuteron OG 330 has a shelf life of at least 24 months when stored in its original tightly closed containers at room temperature. While phase separation may occur during longer storage periods, stirring the product can remedy this. It should be stored frost-free.
Regarding safety regulations, Deuteron OG 330 is not classified as a dangerous product according to Regulation (EC) No. 1272/2008 and therefore doesn't require labeling.
Deuteron GmbH, the manufacturer, has over 30 years of experience in producing and selling additives for the coatings industry. Their product range includes matting agents, conductivity agents, UV initiators, and more. They operate both nationally and internationally and are known for providing dependable solutions tailored to their customers' needs.

Deuteron WAX A

Deuteron Wax A is a specialized micronized amide wax designed to enhance various properties in coatings and inks. Its key features include providing a velvet surface feel, improving sandability, and enhancing the grain of wood coatings. It can be used in a variety of applications such as wood coatings, inks, overprint varnishes, metal coatings, and powder coatings.
The wax is versatile and can be used in solvent-based, water-based, UV curable systems, and powder coatings. In oven-cured coatings like can coatings or powder coatings, Deuteron Wax A contributes to excellent meat-release properties or outstanding degassing when combined with Benzoin.
The recommended dosage of Deuteron Wax A ranges from 0.5% to 3.0% of the complete formulation, depending on the binder, application, and desired properties. It has a white powder appearance with a density of approximately 0.99 g/cm³ and a melting point of 143°C. The particle size is around 6.5 µm.
In terms of processing, Deuteron Wax A is easy to disperse and can be incorporated using a common high-speed stirrer. For water-based coatings, high shear forces may be necessary to ensure proper dispersion. The product has a shelf life of 24 months under room temperature and dry conditions.
Deuteron GmbH, the manufacturer, has been developing and selling innovative additives for the coating industry since 1977. They offer a range of products including matting agents, anti-static additives, texturing additives, thickeners, and UV initiators.
Overall, Deuteron Wax A is a high-quality additive that improves various properties of coatings and inks, contributing to enhanced performance and finish.

Deuteron WAX PP

DEUTERON WAX PP is a micronized modified Polypropylene wax with versatile applications and beneficial properties. Here's an overview:
1. Product Description: DEUTERON WAX PP is a modified Polypropylene wax designed to provide excellent surface feel, good matting, and mechanical stability. It can be used in solvent-based, water-based, 100% UV curable systems, and powder coatings.
2. Applications: It finds applications in various industries including wood and joinery coatings, metal coatings, flexographic inks, overprint varnishes, and powder coatings. It is particularly effective in achieving smooth and elegant matting, burnishing/polishing resistance, reducing settling of silica and fillers, anti-blocking, and degassing.
3. Dosage: The recommended dosage ranges from 0.5% to 3.0% calculated on the complete formulation, depending on the binder, application, and desired properties.
4. Product Characteristic:
  - Appearance: White powder
  - Density: Approximately 0.95 g/cm3
  - Melting point: 138°C
  - Particle size: Approximately 6 µm
5. Processing: DEUTERON WAX PP is easy to disperse and can be incorporated using a common high-speed stirrer. In low viscous systems, a high shear dispersing unit may be necessary for proper dispersion. For water-based systems, a pre-mix with a suitable cosolvent and emulsifier is recommended.
6. Storage Conditions: It has a shelf life of 24 months at room temperature and dry conditions. Storage temperature should not exceed 35°C.
7. Package Sizes: Available in paper bags with a net weight of 15 kg.
8. Safety: According to Regulation (EC) No. 1272/2008, DEUTERON WAX PP is not classified as a dangerous product and does not require labeling. Detailed safety information is provided in the Safety Data Sheet and Regulatory Information Sheet.
DEUTERON WAX PP is developed and supplied by DEUTERON GmbH, a company known for its high-quality additives for the coating industry.

Deuteron SF 505

Deuteron SF 505 and SF 707 are thermosetting additives primarily composed of polymethylurea resin powder. These additives enhance the smoothness and provide a pleasant grip to surfaces. They are particularly effective in reducing the coefficient of friction and increasing scratch and abrasion resistance. Notably, they contain no waxes or silicones.
Here are some key properties and characteristics of Deuteron SF 505 and SF 707:
- Bulk density: Approximately 450 g/l for SF 505 and 430 g/l for SF 707.
- Specific weight: Approximately 1.4 μm for both additives.
- Particle size:
  - d50 (median particle size): Approximately 7.0 μm for SF 505 and 4.0 μm for SF 707.
  - d90 (90th percentile particle size): Approximately 13.0 μm for SF 505 and 8.0 μm for SF 707.
  - d99 (99th percentile particle size): Approximately 18.0 μm for SF 505 and 12.0 μm for SF 707.
- Appearance: Both additives appear as fine white powders.
These additives are designed to provide surface modification, offering smoothness and a pleasant tactile sensation. They can significantly reduce friction and enhance scratch and abrasion resistance. Importantly, they are compatible with various systems and can be mixed with other powders, such as PMU powders, SiO2 powders, waxes, and other fillers.
Dosage recommendations for Deuteron SF 505 and SF 707 vary depending on the desired surface effect, typically ranging from 0.5% to 4.0%. The optimal dosage for specific formulations should be determined through trials.
In terms of processing, these additives can be easily incorporated into lacquers using a stirrer or dissolver. They do not require the use of surfactants, even in aqueous systems, and exhibit relatively high resistance against shear forces.
Deuteron SF products can be stored for at least 24 months under room temperature and dry conditions. While they are not classified as dangerous products according to Regulation (EC) No. 1272/2008, precautions should be taken to avoid dust exposure and electrostatic charge buildup.
Overall, Deuteron SF 505 and SF 707 are versatile surface additives suitable for various applications where smoothness, tactile sensation, and improved mechanical resistance are desired.

AQUACER 513

Main Actions

Description

Files

Categories

Application

Add a review

Leave a Reply · Cancel reply

You May Also Be Interested In

Deuteron OG 330

Deuteron WAX A

Deuteron WAX PP

Deuteron SF 505

AQUACER 513

Manufacturer

Main Actions

Description

Files

Categories

Application

Add a review

Leave a Reply · Cancel reply

You May Also Be Interested In

Deuteron OG 330

Deuteron WAX A

Deuteron WAX PP

Deuteron SF 505