Clear varnish water thinnable

The formulation provided is for a clear, water-thinnable varnish intended for use in decorative paints within the European Union. This varnish is notable for its low VOC (Volatile Organic Compounds) content, making it environmentally friendly.

Key Components:

1. Resydrol VAY 6278w/45WA: The main resin that forms the base of the varnish, supplied by Allnex.
2. Borchi® Gol LA 2: An additive for improving the properties of the varnish, supplied by Milliken.
3. Borchi® Gel 0434: A thickening agent to adjust the viscosity, also supplied by Milliken.
4. Defoamer : To prevent foam formation during application.
5. Water: As a solvent to make the varnish water-thinnable.

Properties:

• pH Value: 7.3, adjustable to 7.0 - 8.5 using AMP 90.
• Viscosity:
  • Brookfield: 2300 mPas at 20°C.
  • Krebs-Stormer: 101 KU at 20°C.
  • ICI: 1.8 Poise.
• Density: 1.04 g/cm³ at 20°C.
• Gloss: Gardner 20°/60° angle values of 79/88 for a 100 µm wet film on ABS plastic.
• Drying Time: 2 – 4 hours for a 100 µm wet film on glass at 23°C.
• Solids Content: Approximately 41% after 1.5 hours at 110°C.
• VOC Content: Less than 1 g/l according to DIN EN ISO 11890-1 standards.

Suppliers:

• Allnex: Supplier of Resydrol VAY 6278w/45WA.
• Milliken: Supplier of Borchi® Gol LA 2 and Borchi® Gel 0434.

Disclaimer:

The provided information is given in good faith without warranty. Customers are responsible for testing the product for their specific uses and ensuring its suitability. All sales are subject to the supplier's standard terms.

This varnish formulation is designed to meet environmental standards while providing effective performance for decorative painting applications.